Guns International #: 100453636
Seller's Inventory #: PTCZ8220
No sales outside the US.
This
internal part comes from the final specimens of the excellent little
CZ-82 Pistols that came in a couple years back. The parent pistols were
produced in the late 1980s, some of the best in the world. Original
chambering for these is the hot little Makarov Round, the 9x18 caliber.
Dimensions, however, are the same for the model 83 pistols chambered in
.32 ACP and .380 ACP; and this factory ejector will function on the
model 82, and both variants of the CZ83. At press time, we had the few
remaining CZ82 pistols themselves and their twelve round magazines
listed mostly on Guns America, search terms CZ82 Robertson. This listing
is one part, the ejector. Winning buyers may take any number of
ejectors we have on hand at the same per-ejector price and with no
additional shipping charges. Photo specimens are part of this lot of
only a couple dozen remaining parts guns that TGI had left. All of them
are original steel with minimal edge whitening on the top edge of the
ejector proper. We rate their finish as Very Good, and buyers will
receive one of the photo specimens or one of its mates from the same
batch of 25 some odd that we had at press time. Construction is all
steel. This part is entirely original CZ, Czeska Zbrojovka, made in the
Czech Republic in Strakonice. Importer is Tennessee Guns, TGI of
Knoxville. These parts are excellent mechanically. Replacement pricing
on a CZ ejectorlike this is upwards of $50 from many sources. We’re
offering the factory CZ82 CZ83 ejectors in the photos, however, or their
identical mates each for only $ 39.00.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Grips, Magazines, slings, holsters, scopes, mounts, parts & most
any small light items,
entire accessory orders only $10.00 total
shipping no matter how many a person buys. $10.00 for an entire order,
Not $10.00 per item or anything of the sort. $20 Flat Fee on magazine
orders to Alaska, Hawaii, or Puerto Rico, and gun parts to PR civilians
must ship to an FFL. Magazines and any small light non-gun items ride
free with ammo orders. We accept checks with no more than 7 days hold.
GA Pay, MC, Visa, Discover phone- or fax-in 7 3 1 9 8 9 4 7 2 3 orders,
USPS Money Order items shipped ASAP please put your full information,
venue number, and what the item is on any messages. Internet phone hours
8:00 – 5:00 CST Mon – Fri. Robertson Trading Post 117 Front Street PO
Box 365 Henderson, Tennessee 38340.
We buy, sell, and trade. Always
have, since 1952.
Click Photo to Enlarge |
Guns International #: 100453636
Category - Gun Parts - Pistol
- Gun Parts - Military Non-US
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Robertson Trading Post
Company: Robertson Trading Post Member Since: 10/31/13
State:
Tennessee
Zip: 38340-0365
Country: United States
Phone: 731 989 7641
Fax: 731 989 4723
Active Listings: 0
Total Listings: 549
Seller Type:FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
7 Day Return on Used; 90 Day Lay-aways w 20% down non refundable; handguns $15 L 48 long guns $20 L 48 Payment Methods: Discover MC Visa Check USPS MO
Factory CZ82 or CZ83 Ejector for 32 9x18 Makarov or 380 Automatic
Description: No sales outside the US. This
internal part comes from the final specimens of the excellent little
CZ-82 Pistols that came in a couple years back. The parent pistols were
produced in the late 1980s, some of the best in the world. Original
chambering for these is the hot little Makarov Round, the 9x18 caliber.
Dimensions, however, are the same for the model 83 pistols chambered in
.32 ACP and .380 ACP; and this factory ejector will function on the
model 82, and both variants of the CZ83. At press time, we had the few
remaining CZ82 pistols themselves and their twelve round magazines
listed mostly on Guns America, search terms CZ82 Robertson. This listing
is one part, the ejector. Winning buyers may take any number of
ejectors we have on hand at the same per-ejector price and with no
additional shipping charges. Photo specimens are part of this lot of
only a couple dozen remaining parts guns that TGI had left. All of them
are original steel with minimal edge whitening on the top edge of the
ejector proper. We rate their finish as Very Good, and buyers will
receive one of the photo specimens or one of its mates from the same
batch of 25 some odd that we had at press time. Construction is all
steel. This part is entirely original CZ, Czeska Zbrojovka, made in the
Czech Republic in Strakonice. Importer is Tennessee Guns, TGI of
Knoxville. These parts are excellent mechanically. Replacement pricing
on a CZ ejectorlike this is upwards of $50 from many sources. We’re
offering the factory CZ82 CZ83 ejectors in the photos, however, or their
identical mates each for only $ 39.00.
SOLD |
Guns International #: 100453636
Seller's Inventory #: PTCZ8220
No sales outside the US.
This
internal part comes from the final specimens of the excellent little
CZ-82 Pistols that came in a couple years back. The parent pistols were
produced in the late 1980s, some of the best in the world. Original
chambering for these is the hot little Makarov Round, the 9x18 caliber.
Dimensions, however, are the same for the model 83 pistols chambered in
.32 ACP and .380 ACP; and this factory ejector will function on the
model 82, and both variants of the CZ83. At press time, we had the few
remaining CZ82 pistols themselves and their twelve round magazines
listed mostly on Guns America, search terms CZ82 Robertson. This listing
is one part, the ejector. Winning buyers may take any number of
ejectors we have on hand at the same per-ejector price and with no
additional shipping charges. Photo specimens are part of this lot of
only a couple dozen remaining parts guns that TGI had left. All of them
are original steel with minimal edge whitening on the top edge of the
ejector proper. We rate their finish as Very Good, and buyers will
receive one of the photo specimens or one of its mates from the same
batch of 25 some odd that we had at press time. Construction is all
steel. This part is entirely original CZ, Czeska Zbrojovka, made in the
Czech Republic in Strakonice. Importer is Tennessee Guns, TGI of
Knoxville. These parts are excellent mechanically. Replacement pricing
on a CZ ejectorlike this is upwards of $50 from many sources. We’re
offering the factory CZ82 CZ83 ejectors in the photos, however, or their
identical mates each for only $ 39.00.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Grips, Magazines, slings, holsters, scopes, mounts, parts & most
any small light items,
entire accessory orders only $10.00 total
shipping no matter how many a person buys. $10.00 for an entire order,
Not $10.00 per item or anything of the sort. $20 Flat Fee on magazine
orders to Alaska, Hawaii, or Puerto Rico, and gun parts to PR civilians
must ship to an FFL. Magazines and any small light non-gun items ride
free with ammo orders. We accept checks with no more than 7 days hold.
GA Pay, MC, Visa, Discover phone- or fax-in 7 3 1 9 8 9 4 7 2 3 orders,
USPS Money Order items shipped ASAP please put your full information,
venue number, and what the item is on any messages. Internet phone hours
8:00 – 5:00 CST Mon – Fri. Robertson Trading Post 117 Front Street PO
Box 365 Henderson, Tennessee 38340.
We buy, sell, and trade. Always
have, since 1952.
Guns International #: 100453636
Seller's Inventory #: PTCZ8220
No sales outside the US.
This
internal part comes from the final specimens of the excellent little
CZ-82 Pistols that came in a couple years back. The parent pistols were
produced in the late 1980s, some of the best in the world. Original
chambering for these is the hot little Makarov Round, the 9x18 caliber.
Dimensions, however, are the same for the model 83 pistols chambered in
.32 ACP and .380 ACP; and this factory ejector will function on the
model 82, and both variants of the CZ83. At press time, we had the few
remaining CZ82 pistols themselves and their twelve round magazines
listed mostly on Guns America, search terms CZ82 Robertson. This listing
is one part, the ejector. Winning buyers may take any number of
ejectors we have on hand at the same per-ejector price and with no
additional shipping charges. Photo specimens are part of this lot of
only a couple dozen remaining parts guns that TGI had left. All of them
are original steel with minimal edge whitening on the top edge of the
ejector proper. We rate their finish as Very Good, and buyers will
receive one of the photo specimens or one of its mates from the same
batch of 25 some odd that we had at press time. Construction is all
steel. This part is entirely original CZ, Czeska Zbrojovka, made in the
Czech Republic in Strakonice. Importer is Tennessee Guns, TGI of
Knoxville. These parts are excellent mechanically. Replacement pricing
on a CZ ejectorlike this is upwards of $50 from many sources. We’re
offering the factory CZ82 CZ83 ejectors in the photos, however, or their
identical mates each for only $ 39.00.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Grips, Magazines, slings, holsters, scopes, mounts, parts & most
any small light items,
entire accessory orders only $10.00 total
shipping no matter how many a person buys. $10.00 for an entire order,
Not $10.00 per item or anything of the sort. $20 Flat Fee on magazine
orders to Alaska, Hawaii, or Puerto Rico, and gun parts to PR civilians
must ship to an FFL. Magazines and any small light non-gun items ride
free with ammo orders. We accept checks with no more than 7 days hold.
GA Pay, MC, Visa, Discover phone- or fax-in 7 3 1 9 8 9 4 7 2 3 orders,
USPS Money Order items shipped ASAP please put your full information,
venue number, and what the item is on any messages. Internet phone hours
8:00 – 5:00 CST Mon – Fri. Robertson Trading Post 117 Front Street PO
Box 365 Henderson, Tennessee 38340.
We buy, sell, and trade. Always
have, since 1952.