Guns International Logo
Order By
Featured Gun Classifieds Gun Parts - Revolver Parts
Seller: LONG RANGE SHOOTER
Area Code: 412
$400.00
GI#: 100415528
SMITH & WESSON "K" FRAME, CHECKERED ROSEWOOD, ROUND OR SQUARE BUTT. COMBAT TACTICAL REPRODUCTION GRIPS WITH FINGER GROOVES. Free Shipping in U.S. International Shipping: $15.00, Co ...Click for more info
Seller: N.C. Ordnance Inc.
Area Code: 252
$100.00
Gun Parts - Revolver Parts
S&W factory made pre-model 10 walnut hand checkered grips with the deep inset S&W brass medallions. Condition is very good with l only slight wear. Checkering is still sharp and consistent. Co ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$125.00
This appears to be a COLT unissued, unused NOS cylinder with 98% factory blue with no wear. A few specks of pin point corrosion from storage. Comes with the cylinder rod and extractor star. Looks like ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$150.00
Dan Wesson, and high Standard Crusader .357 grips for the grip frame with a square grip shaft, and bottom screw mount. each grip has it's own screw for assembly. These grips are in very good condi ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$20.00
A very good S&W 6" barrel with an excellent, clean, shiny rifled bore, and has a raised front sight with an orange day-glo insert. The exterior has some wear from being in a gunsmith drawer w ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$125.00
New made Colt factory .45LC cylinder, with 95% factory blue.Faint common drag line and no numbers on this fine cylinder. Could be used for 1st or 2nd gen Colt SAA. Check my gun parts, and grips for un ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$150.00
Very rare S&W Lady smith factory walnut grips, with S&W deep dish brass S&W logo/medallions.I ave several pairs none have been on a gun, and there are no numbers written on the back. Wear ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$80.00
A High Standard Double Nine box with insert in excellent condition for model 9169 or Double Nine. It's rare to find a box like this in fine condition. Check my inventory for unusual and rare boxes ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$95.00
Colt Model 1917 Revolver- Original Factory Lanyard Ring- Also will fit other Colt and S&W Revolvers from the WWI and WW II eras- Straw Color- Appear to be Never Used ...Click for more info
Seller: InterarmsTx
Area Code: 713
29.00 USD
Smith and Wesson Model 53 Hammer Assembly- 22 LR / 22 Jet- 80%+ Original Case Colors Remain- This is a USED Part- Excellent Condition ...Click for more info
Seller: InterarmsTx
Area Code: 713
89.00 USD
A very good Colt pre-Woodsman 8" barrel , full blue with one scrape mark , and has the Colt full line address on the top with the last patent date of 1926. The bore is excellent, clean and rifled ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$150.00
 Awesome Color & Grain... Python small panel Vintage Ivory Grips   COLT PYTHON I FRAME, SMALL PANEL. REAL AGED IVORY GRIPS (Pre-Ban), SMOOTH FINISH. These grips are heavy and feel solid ...Click for more info
Seller: nextec12
Area Code: 480
963.00 obo
A very good pair of S&W K frame vintage stag grips that will fit a model 10 quite well. Don't see any damage or chips, or cracks. We don’t have asite .I prefer money orders or a check. I ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$160.00
Well, if you are like me you have always wanted and Old Single Action Colt with a nice set of ivory grips but as the price of Ivory when up you knew it would never happen. Well now here is a chance to ...Click for more info
Seller: River Junction Trade Co.
Area Code: 563
$245.00
Very good condition S&W model 10 vintage K frame stag grips. They has good color and about no wear and no damage. We don’t have asite .I prefer money orders or a check. Item ships when funds ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$195.00
Colt 'Presentation' Style Grips For Python.  Gold Medallions 'New Condition' AVAILABLE FOR PURCHASE AT OUR ON-LINE SITE. CUSTOMSHOPINC   ...Click for more info
Seller: Custom Shop LLC
Area Code: 406
$59.95
Colt Pachmayr 'Gripper' Style Rubber Grips For Colt Python  With Gold Full Body Horse Medallions  'NEW'. AVAILABLE FOR PURCHASE AT OUR ON-LINE SITE. CUSTOMSHOPINC   ...Click for more info
Seller: Custom Shop LLC
Area Code: 406
$99.95
This S&W factory barrel is 8 1/8" long and has about 98% original blue, with a very clean, shiny, strong rifled bore and the front ramp sight has a day-glo orange sight. Slight wear to thread ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$150.00
An unissued U.S military S&W victory model holster used by ground forces as well as pilots during WWII. Some scuffing but all the stitching sound and correct, with military belt hooks on the back. ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$65.00
This exceptional pair of High Standard factory grips for the Double Nine in hard white rubber and never been on a gun. They come with the original blued screw, and gold factory medallion.These are hea ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$65.00
"Rare" New Colt Python .357 Magnum Cylinder Bolt Stop.  Original Part.  Please Consult Licensed Gunsmith For Correct Timing & Installation. AVAILABLE FOR PURCHASE AT OUR ON ...Click for more info
Seller: Custom Shop LLC
Area Code: 406
$100.00 FREE Shipping
Colt Nos Agent 2" fully blued shrouded barrel, with a mint bore and matching 6 shot cylinder, with full blue and slight wear at the outside front edge .The cylinder is complete with rod, spring a ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$115.00
A new old stock COLT POLICE POSITIVE 4" nickle barrel for the .38 spec.. This fine barrel has all of it's finish with wear from storage. Check my inventory of rare barrels and unusual grips a ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$85.00
New /old stock from Colt factory this .38spec caliber 2nd gen nickle plated cylinder in excellent condition, never been on a gun! Has the Rampart Horse stamped on the back of the cylinder. Check my in ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$195.00
A useable J frame cylinder that's made of coated aluminum and is a six shot.Has the cylinder rod, and extractor factory installed. Exterior has a slight drag line common for all S&W revolvers, ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$65.00
A S&W set of solid heavy nickle silver grips cast in Mexico many years ago. The lay flat and will fit a model 10 or K frame revolver. They come with a mounting screw. Don't see these very ofte ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$135.00
A good set of older stag grips for the model K frame or model 10 S&W with a grips screw. These grips are smooth and have good coloring, not sure if they have been on a gun. Check my inventory for ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$150.00
RUGER "VAQUERO LIGHTNING" BRASS BACKSTRAP THE NEW 2ND GENERATION IMPROVED RUGER "VAQUERO LIGHTNING" WITH IMITATION JIGGED BONE GRIPS Will fit Ruger Vaqero, XR3-Red, XRN-Re ...Click for more info
Seller: N.C. Ordnance Inc.
Area Code: 252
$199.00
RUGER "VAQUERO LIGHTNING" CHROME BACKSTRAP THE NEW 2ND GENERATION IMPROVED RUGER "VAQUERO LIGHTNING" Will fit Ruger Vaqero, XR3-Red, XRN-Red, Black Hawk & Single Six ...Click for more info
Seller: N.C. Ordnance Inc.
Area Code: 252
$199.00
RUGER "VAQUERO LIGHTNING" BRASS BACKSTRAP THE NEW 2ND GENERATION IMPROVED RUGER "VAQUERO LIGHTNING" Will fit Ruger Vaqero, XR3-Red, XRN-Red, Black Hawk & Single Six In ...Click for more info
Seller: N.C. Ordnance Inc.
Area Code: 252
$179.00
Original Colt New Frontier Barrel 4 1/4" Blued in .22 LR Very Nice Condition ...Click for more info
Seller: Dlk Investments
Area Code: 360
$150.00
These are a pair of grips for the Remington 1875 or 1890 revolver and are recent made, high quality. The detail is sharp and they haven't been fitted to a gun. Check my other grips in inventory th ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$19.95
A new old stock barrel for a 2nd gen Colt SAA in 5 1/2" length and correct Colt markings. Blue is 100% and barrel has not been on a gun. The threads will also fir a 1st gen frame. Third gen has m ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$195.00
A super clean SAA Colt cylinder in full blue, never been on a gun, and has no wear.Will chamber the .38spec. cartridge , and the chambers are super clean. Check my parts inventory for unusual stuff! W ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$225.00
A Colt 1st gen cylinder for the 32WCF or .32-20 cartridge. The condition is full blue with wear on edges. This appears to have been on a gun for a short time as it as the cylinder tube with wear on th ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$225.00
A Colt factory 2nd gen cylinder in full nickle, with the Rampart Horse stamped on the back. It has never been on a gun, and is full nickle with factory grease , age speckles and two small spots of cor ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$195.00
A very good older quality made hand tooled holster for a Colt SAA with a 4 3/4" barrel. this holster fits over the belt.Condition is very good with supple leather and all the stitching there! Che ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$125.00
A clean vintage flap holster and belt for a small frame revolver like an Iver Johnson or Harrington & Richardson , etc. The barrel would have to be about 2 1/2" or less. Leather is a little s ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$45.00
A vintage slim-jim holster in russet tan leather with soft /supple finish, the back states that ir could be used for a 7 1/2" barrel. Check my other vintage holsters. We don’t have asite .I ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$115.00
Colt Pachmayr 'Gripper' Style Rubber Grips For Colt Python  With Gold Horse Head Medallions  'NEW' AVAILABLE FOR PURCHASE AT OUR ON-LINE SITE. CUSTOMSHOPINC   ...Click for more info
Seller: Custom Shop LLC
Area Code: 406
$119.95
Smith and Wesson 4" Nickel Barrel For a Model 29 Pinned Frame Style Barrel is in Very Nice Condition and is Very Rare ...Click for more info
Seller: Dlk Investments
Area Code: 360
$300.00
Smith And Wesson 6" Blued 41 Mag Barrel For a Model 57 With a Pinned Style Frame Blueing is very nice Barrel is in very nice condition  ...Click for more info
Seller: Dlk Investments
Area Code: 360
$250.00
Very good condition for the HI-STANDARD DOUBLE NINE REVOLVER, complete with the proper insert. The dimensions are 12" long x 6" wide. A few minor scuffs but complete, and bright colors of br ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$95.00
A great pair of vintage Colt SAA stag grips with a screw. You are buying a set of grips , with their screw. These fit a 1st gen very well, and can be used on a 2nd gen gun.Check my inventory for unusu ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$350.00
Great set of vintage Colt SCOUT stag grips. For the Colt SCOUT .22 LR/MAG revolver. Comes with a screw, would look great on that old cowboy gun! Blocks of wood have been attached to the inside, and co ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$350.00
A set of SAA screws for the UBERTI revolver and other clones that were foreign made. These will no fit Colt threads , however the cylinder rod and ejector rod will. These ate like the 19th century Col ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$150.00
The L frame :586 686 386 396 696 , and other model revolvers cylinder in .357mag. with the cylinder rod, and fitted extractor star. assembly works well, and has most of the blue, and the chambers are ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$125.00
S&W Bodyguard cylinder , crane, extractor and spring. This is facrot dark flat blue, and is complete ready to drop into your gun. Has a few small dings on the crane edge, and rest is about complet ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$125.00
S&W pre-model 10 M&P revolver cylinder for .38 spec. and would fit most K frame 6 shot revolvers. This cylinder has the crane numbered, and the cylinder numbered also not the same number, and ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$65.00
A usable .44 mag cylinder for a stainless steel S&W model 629 revolver. Item is oiled and has a couple small dings from storage. Comes with the extractor, rod, and spring ready to go. Check my inv ...Click for more info
Seller: HOME TOWN GUNS
Area Code: 860
$125.00