Guns International #: 101035625
Click Photo to Enlarge |
Guns International #: 101035625
Category - Browning Shotguns - Citori
- Shotguns - Multi Barrel Sets
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: JDP
Company: Barboursville Arms Inc, LLC Member Since: 10/12/14
First Name: Jerry
Last Name: Pownall
State:
Virginia
Zip: 22923
Country: United States
Phone: (540) 207-0597
Fax:
Active Listings: 45
Total Listings: 223
Seller Type:FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Cash, Check, USPS Money Order
Browning
Citori Lightning Feather Combo, O/U Shotgun, with Invector Choking and Ejectors
Description: Browning Citori Lightning Feather Combo, O/U Shotgun, with Invector chokes and ejectors. Includes the original 20- and 28-gauge barrels (both 27 inches) and an added Browning .410 bore barrel (28 inches). All three barrel sets hve ventilated ribs. Based on the serial number of the gun – XXXXXMV131, the year of manufacture is 2005. LOP is 14 ¼ inches. The drop at comb is 1 1/2 inch; the drop at the heel is 2 3/8 inch. The finish on metal and wood is all original. Barrels are 98+ percent; the only marks are where the forearm contacts the bottom barrels. The boxlock is 95+ percent with some white discoloration on the left side, otherwise it would be 98+ percent. The boxlock is engraved with decorative patterns on both sides, and the bottom has a golden feather etched into the metal. The trigger guard is engraved with the Browning buck head and is in excellent condition. The gun has a single, gold-colored trigger. The walnut stock and forearm have high-gloss finishes, and both are in excellent condition. The stock belly has a very-hard-to-see dent which did not penetrate the finish. There is also a small,1/4-inch v-shaped scratch on the belly which also appears not to have penetrated the finish. On the right side of the stock, there is a 1/2 x 1/8-inch dent/scratch near the stock belly and a 1 x 1/8-inch chip out of the finish (down to the wood), where the wood meets the recoil pad. On the left side of the stock, there is a 1/4 x 1/16-inch scratch that does not appear to have penetrated the finish. There are a couple of pin-point nicks that appear not to have penetrated the finish. The checkering on the grip is deep and crisp with no sign of wear; there is an approximate 3/4-inch dent to the checkering on the left side toward the bottom of the grip. There are no other marks on the stock checkering. The stock is fitted with an after-market White Line recoil pad with a small, inch-long abrasion on the left side, in the middle of the pad. The forearm is in even better condition than the stock. The checkering is also deep and crisp, with no marks. The serial number stamped into the forearm wood (interior) matches the serial number of the forearm hardware and the serial numbers of the 20- and 28-gauge barrels. BARREL DETAILS The Browning Citori Lightning Feather Combo, came standard with 20-gauge and 28-gauge, 27-inch barrels with matching serial numbers. This combo set also has Browning.410 bore barrel set, identical to the 28-gauge, but with a 28-inch barrel set and a different serial number. The current owner says the set was purchased without the .410-bore barrel, then it was sent to Browning to have the .410 barrel added. The Browning case, with a three-barrel configuration, supports this contention. Below are some additional details for each set. 20-Gauge Top barrel, left side, is labeled: BROWNING ARMS COMPANY MORGAN, UTAH MADE IN JAPAN / MIROKU Right side is labeled: CITORI SPECIAL STEEL 20GA – 2 ¾” AND 3 Invector Plus choke tube system with the following chokes: Full Mod Mod IMP CYL IMP CYL SKEET SKEET 28-Gauge Top barrel, left side, is labeled: BROWNING ARMS COMPANY MORGAN, UTAH MADE IN JAPAN / MIROKU Right side is labeled: SPECIAL STEEL 28GA – 2 ¾” AND 3” Invector Plus choke tube system with the following chokes: Full Mod IMP CYL IMP CYL IMP CYL (stainless steel) SKEET SKEET .410 Bore Top barrel is labeled: BROWNING ARMS COMPANY MORGAN, UTAH & MONTREAL P.Q. MADE IN JAPAN Right side is labeled: SPECIAL STEEL .410 BORE — 2½” AND 3” .410 Bore Invector choke tube system with the following chokes: Full (stainless steel) Mod (stainless steel) IMP CYL (stainless steel) IMP CYL (stainless steel) SKEET SKEET The photos are high resolution, so zoom to see details. Contact me for additional photos or even higher resolution versions the posted pictures. Must ship to FFL. Buyer pays USPS Priority mail and insurance, if desired. I will accept a personal check which I will hold until it clears. I will also accept a USPS money order which I do not have to hold, as it clears immediately. SOLD |
Guns International #: 101035625
Guns International #: 101035625