The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
This is a 9 3/8” overall length and 5 1/8” clip point Bowie knife blade. The ricasso is marked Adolph Blanch San Francisco Razor (arrow in an oval) Steel. The grip is a 4 pin jig
...Click for more info
Indian Princess Pattern American Militia Officer's Sword with Scabbard. 1830s. single fuller straight blade, with gold accented engraving set against niter blue fields on the bottom third of the bla
...Click for more info
This sword was made by Horstmann Philadelphia and the Eagle Head on the pommel faces to the left so it was made between 1870 and 1941. The etched nickel pated blade measures 31” long and is 36
...Click for more info
This is a U.S. Model 1852 Naval Officers Dress Sword and was made by N.S. Meyers Inc. New York. The excellent blade is 31 5/8” long and is 36 ¾” overall in length. It retains near
...Click for more info
Wells Miller served with the Marine Corp In WW 1 and again all through WW 2 in the South Pacific, he retired in 1946 as a Colonel.
There is a very small spot of rust on the blade 4.5 " from the
...Click for more info
Free shipping...Spanish M1964 bayonet for 7.62 mm. NATO caliber CETME Model C rifle and also for the FR–7 and FR–8 training rifles.
This M1964 bayonet has checkered plastic grips and an
...Click for more info
This is a British Pattern 1907 second model made by Wilkinson. The blade is in very good sharpened condition with light oxidation and nearly unmarred edge and correct tip. The crossguard shows signs o
...Click for more info
"Circa 1930's-1940's, 27"" slightly curved blade. White ray skin wrapped in olive drab fabric tape is in very good condition. Bamboo peg has been replaced with wood. Standard three cher
...Click for more info
This knife is handmade in Wazirabad Pakistan. It is collector grade quality and totally engraved by hand using hammer and chisel old school techniques.. it's made from J2 stainless steel and has
...Click for more info
This is an original WW2 SS Police Officer's Sword/Degan manufactured by Hermann Rath. It is the sword only, the scabbard was lost by the vet's family that brought this one back. This would
...Click for more info
This Senior Foresters Cutlass by Eickhorn is in EXC+ condition throughout. The total length is 48.0 cm. The Cutlass has the maker mark on the blade: Carl Eickhorn Solingen, along the spine of the blad
...Click for more info
Sale only to lower 48 States. Item is sold AS-in condition , and no return allowed. USPS Money orders only for payment.
Shipping is by UPS insured priority mail, and the shipping cost is included i
...Click for more info
Sale only to lower 48 States. USPS money order only for payment. Item sold in As-in condition ,and no returns are accepted.
Shipping by US Priority insured mail ,and cost of shipping is included in
...Click for more info
Sales only to lower 48 States. USPS Money Orders only for payment. Sold in As-in condition, and no returns are accepted.
Shipping by UPS Priority Mail Insured is included in the price.
Pictures
...Click for more info
This is a beautiful California style dagger with 440C steel and ironwood burl scales. The scabbard and knife engraving was by Franz Marktl.
I would consider trades for pre 1899 ANTIQUE PISTOLS and ri
...Click for more info
"Vintage Knights Templar Ceremonial sword with a 28"" long blade. Blade has your standard floral scroll with one side showing knights jousting, the other side has knight holding a cross
...Click for more info
"Vintage Masonic Ceremonial sword with Knights head pommel with eagle. Blade is 27.5"" in length with faint etching visible. Finish is a dark freckled patina. Bone grip has discoloratio
...Click for more info
"Japanese WWII Army Officers parade sword with a 27.5"" blade with a slight curve, Ricasso has had "" Japanese/Imperial/Navy"". Blade has a false humon with pin-pric
...Click for more info
"Eagle head Officers sword with a 30"" floral etched blade with eagle and patriotic motifs present, 16"" fuller. Brass shield, guard and Eagle head pommel are in very good con
...Click for more info
A late 19th or early 20th Century likeness of a medieval period mystical broadsword. Rather large with an overall length of about 57 inches. 43 inch blade has a dark patina as does the guard & pom
...Click for more info
Wooden frame is 27 inches x 23 inches. Well done and attractive. All knives show the white cross and are marked with ID numbers. A black banner from top to bottom has popular knives with their respect
...Click for more info
"Later Production Luftwaffe Officers sword circa 1940 as the fittings are made from aluminum. Blade is in near excellent and marked ""SMF LOGO/SMF/SOLINGEN"". Wire wrapped lea
...Click for more info
"Vintage Masonic Ceremonial sword with Knights head pommel with eagle. Blade is 27.5"" in length with faint etching visible. Finish is a dark freckled patina. Bone grip has discoloratio
...Click for more info
"Masonic Tyler Sword in fair condition. Bone handle is broken at the pommel, which has now made it loose. Blade is 28"" in length with no fuller. Chrome plating is flaking in some areas
...Click for more info
This is marked on the ricasso V Crown R Joseph Rodgers & Sons, 6 Norfolk Street Sheffield and a Star Cross below Sheffield. This is 14 7/8” overall with a 9 ¾” blade. The grip
...Click for more info
This bayonet fit the Mauser Gewehr 98 & Karabiner 98k which were two of the standard German infantry rifles. The ricasso is marked 42asw on one side and 4610 over n on other side. The non sharpene
...Click for more info
This is a very handsome and interesting sword that measures 36 1/2" overall, with a 30 3/4" straight, double-edged blade with narrow double fullers and etched panels on both faces. The blade
...Click for more info
12-3/4 inch blade marked "WKC". Both sides etched with hunting scenes. Clam shell and deer hoof guard. Ivory grips with acorn rivets. One "acorn" missing. Scabbard is in very good
...Click for more info
Swiss Knife bayonet for use on the renowned 7.5 mm. Sturmgewehr 57 (Assault Rifle 57).
The "W + F" circled mark indicates assembly by Waffenfabrik Bern.
The
...Click for more info
This is a great looking sword that measures 37 7/8" overall, with a 31 5/8" straight, double-edged blade with narrow double fullers and etched panels on both faces. The blade has been polish
...Click for more info
"World War II-era surplus Kar98k bayonet made by E. & F. Hoerster in Solingen (""asw"") with a 10-inch blade & riveted bakelite grips. Comes with a metal scabbard made
...Click for more info
"Reproduction 18-inch World War II machete made by Ontario Knife Company for Shreck Wholesale Industries (""SWI""). Marked ""U.S. 1943"" on the ricasso. Co
...Click for more info
WKC Solingen Diplomatic Corps Official's Dagger
Nazi Germany WWII era
Extremely rare dagger
No dings, excellent condition
Cross guard is high relief, detailed with eagle with spread wings ho
...Click for more info
"Reeves Socket Bayonet for the .58-caliber British P-53 Enfield rifle musket. Condition overall is excellent only some discoloration on the blade. Comes with original leather scabbard. Consignmen
...Click for more info
Seller's note: I am not an expert on military swords so much of the information I have in this ad I have gleaned from the internet. I have tried to be careful not to misrepresent the sword presented h
...Click for more info
This Model 1902 Army Officers Saber was made by the Springfield Armory in 1903 or 1904. Springfield produced only 5,735 of these sabers between 1903 and 1918. (Some texts state that Springfield en
...Click for more info
"Japanese hooked quillon 20-inch Type 30 bayonet with a 15.5-inch blade that was made by Koishikawa Arsenal in Tokyo. Comes with 16-inch metal scabbard & a leather frog. Consignment
...Click for more info
This is a WWII German Army Dress Bayonet with Scabbard by the maker E. Pack & Sohne. This bayonet is in very good condition with an excellent blade, the guard and pommel are showing light oxidatio
...Click for more info
"1918-dated Australian Enfield No.1 Mk.III rifle bayonet cut down to 17-inch overall length & nickel plated for ceremonial purposes. Overall good condition & unit marked to the 3rd Milita
...Click for more info
This is a pair of British Enfield Bayonets both are in very good to excellent condition, the first is a No.4 MkII this come complete with a canvas frog. The other is a No.9 Mk.1 in excellent condition
...Click for more info
"German World War II-era 15.25-inch Kar98k bayonet made by E.u.F Horster Metallwaren Manufaktur in Solingen in 1942, so it is marked ""42 asw"" on the left ricasso. The SN 387
...Click for more info
Danish GM50 M1 Garand Bayonet. See photos for condition and call Bill at RW Outdoors with any questions at 406-842-5271. Shipping included in price.
...Click for more info
This sword measures 38" overall with a 32 1/2" slightly curved, single-edged blade having 3/4 length unstopped single fullers.
The steel has an overall excellent original polish and crisp E
...Click for more info
Beautiful Swiss Dress Dagger with scabbard, made by SIG Neuhausen, the perfect accessory for a SIG or Swiss small arms collector. Synopsis: Swiss, SIG Neuhausen, Dress Dagger, 43310, X-230 Condition:
...Click for more info
This is the Model 1909 Bayonet and Scabbard for the Argentine cavalry carbine model 1909. The bayonet measures 21 inches overall with a 15 ¾ inch blade marked "Modelo Argentino 1909" o
...Click for more info
Serial #153 and made in 1887 this original 1876 Martini-Henry Common Long Bayonet sometimes referred to the pattern 1876 was converted at RSAF Enfield in February 1900, in excellent condition with onl
...Click for more info
"USGI 16-inch M1905 bayonet (20.5-inch overall length). Blade is in rough condition & maker marks ground off. Original wooden grips have been replaced with World War II-era black plastic grip
...Click for more info