The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
A complete Marbles Game Getter receiver working with very good black hard ruber original fitted grips. SN 32 must ship to a C&R or FFL thanks. Has most of tjhe blue with some drag shallow sc
...Click for more info
Unusual Tranter 19th century .380cal rim fire revolver made in the early 1870's , with a 5" octagonal barrel and a clean bore with sharp rifling and some corrosion down in the grooves but n
...Click for more info
An exceptional grained Monte Carlo-style walnut for a Colt Sauer rifle.The stock measures about 32 1/4” overall and features a left-side cheek piece, rosewood grip cap with inlaid rampant
...Click for more info
Has English Birmingham proofs on the underside of the barrel, and is about 6 3/4" overall in length with side panel chisel engraving and LONDON. The barrel is about 2 1/4" long and is about
...Click for more info
S&W .32 CF relic found in the /ct river many years ago, with complete factory black hard rubber grips and the surface has areas of corrosion and pitting. hammer pulls back and can feel a mainsprin
...Click for more info
Very unusual 1858 Remington .44 revovler made by a prestigeous maker EN Santa Barbara with an 8" octagonal barrel, and indexes and locks up toght. the fully blued gun is hamnd chisel engraved inc
...Click for more info
Clean working S&W model 1 1/2 in .32 CF that indexes good and locks up tight. Last patent date 1875, and reissue 1871. With a 3 1/2" barrel and a clean rifled bore strong rifling and corrosio
...Click for more info
A fine pair of Colt 1st gen, SAA pre-ban ivory grips with factory medallinos and screw. This is a hidden sxcrerw as the left grip has an internal esccheon which would be special order custom shop mode
...Click for more info
Clean 1st gen pre-ban Colt SAA grips with nice yellow coloring, and original blued screw. They fit me 1st gwen 1905 dated SAA but they may need fitting as some locating back-strrap suds may vary.
Whe
...Click for more info
Nice set of natural pre-ban Colt revolver factory ivory grips that fit my 1st gen dated 1905 but NOTICE some fittion may be required as the s backstrap locating stud may very from one gun to another,
...Click for more info
Most likely a Middle East or Causcasion made long musket possobly for a chieftan with elaborate MOP, and brass inlays . Measuring about 55" long and the barrel is about 39" long. The f
...Click for more info
A Middle east or Caucasian long Snapaunce musket measuring about 60 1/2" long with a round barrel of 45". And the stock has profuse ilays and carvings. The hammer cocks but doesn;t hold and
...Click for more info
Vwery fine American made brace of brass barrelled flointlock pistols with about .48 cal, and a 10 1/8” octagon barrels showing moderate verdigris throughout. This is a rather nice honest pair
...Click for more info
A good working 17th /18th century pirate flintlock pistol measuring about 15 1/2" long, with a 9 1/2" long barrel. The European walnut stock is sound with high relief carved designs, and the
...Click for more info
Very decorartive Pirate Ship's Captain flintlock pistol measurimg about 19 1/2" long woitha 12 1/2" long barrel. The special gun was walnut wood covered in calf skin long ago, and, has
...Click for more info
A Sound, working Hero marked derringer measuring about 6 1/2" length overall with a round barrel of 3 1/4" long. Both cock omn tjhe haammer work and tjhe nipple is present. The brass frame e
...Click for more info
With a serial #28,and with 44-40 caliber, this 7 3/8” barrel has an oxidized bore. The metal surfaces have mostly toned to a mix of deep gray and plum-brown patina showin
...Click for more info
A working more recent made percussion single shot .44 cal pistol that works well and comes with a brass ram-rod, Barrel with strong rifling. The breech. Brass frame, and hardwood stock, works we
...Click for more info
Made by Henry Aston of Middletown, CT in 1849, this percussion pistol features an 8 ½”
round smoothbore barrel with brass blade front site. Swivel steel ramrod with button-
shaped head,
...Click for more info
Very clean no longer made by High standard this Leech and Reardon CSA revovler of .36 cal with a 7 1/2" and clean bore, ondexes and locks up tight. abpi\ut 99% original blue, and nickel pla
...Click for more info
Another Pirate flintlock pistol of the 17th to early 18th century with a bannana shaped early lockplatethat;a finely chisel engraved. The overall length is ablout 18 1/2" long with a barrel
...Click for more info
Looks good with wear tlo high places but a good beginning fora project gun. SN8778. Must ship to a FFL thanks,,
When buying a gun always have it examined by a competent gunsmith before sh
...Click for more info
Very good quality Belgian long barrel boot percussion pistol with a chisel engraved frame and overall length is about 7 1/2" long with an octagonal barrel of about 3 1/2". The /French walnit
...Click for more info
With a serial #4576, in 41 RF, with a 2 1/2” barrel with an oxidized bore. The metal surfaces retain about 85-90% of nickel finish showing scattered light flaking to gray-brown patina and
...Click for more info
Made by Hopkins and Allen this small frame shoots black powder .22 short as a noise maker. Considered the scarcest of the H&A weapons. Measuring overall about 4 5/8" lomng with a round 3.380
...Click for more info
Thois early flntlock type was developed after the matchlock and pre0dog lock with a mechanism much like to snapaiunce where the hammer cocked is released the smae way. Given to Mass militia in the 160
...Click for more info
Vert clean long barrelmusket of .62 cal smooth bore measuring overall about 68 1/2" long with a round barrel of about 51" long. the Belgium back action lock works well and the frizzen shower
...Click for more info
This paaears f\to be a swing out Hopkins and Allen derringer made from about 1870 to 1890's for a .22 cal black powder short. Barrel swings out and pulls back in a hammer wirks well. Bore is corroded
...Click for more info
Title: Merwin & Hulbert .38 Double Action Revolver
Description: A clean well functioning ole'westen cowboy double action .38 cal Ctr. fire revolver with a 2 1/2" barre, with a lear east to r
...Click for more info
This iron frame 19th century derringer measures about 5 1/4" long with a round 2" smooth bore barrel of .30 caliber. The action works well and hammer has two clicks. The walnut grips a
...Click for more info
Very clean looks unfired, this tight Remington sheath .32 cal black powder revolver with a 3 1/2" octagonal barrel with clean bore and sharp crisp nipples.Hardwood grops are clean and well fitted
...Click for more info
A well used original 1863 dated Norwich riled with breech area od the barrel with much pitting from extensive use and the lock plate is well dated , with a federal eagle, date and maker na,me. Action
...Click for more info
Dated USN 1845 on the rear of the percussion lock, and 1845 on breech pof the barrel with inspector mark of :RC over a P. Opposote the lock in the stock is an oval but can;t read it/ The nipple is abo
...Click for more info
A good working vintage S&W model No 1 1/2 spur trigger revolver that indexes good, lock-up os always spot on, no wobble...The exterior metal plating has begun to wear and in places grey meta
...Click for more info
This Receiver Model 1873 large calibe is in GOOD condition. Receiver is sound but has some handling marks and possibly , dings and along the bottom edge dingss. The mag. tube ID is ..510
...Click for more info
A relic but working percussion belt pistol that measures about 11 1/4" long with a round barrel of about 6" long with simple designs at the breech. Hammer cocks back and releases easily but
...Click for more info
Pre-ban natural aged ivory grips for the .22 cal Colt Frontier, Scout or Peascemaker revolver with screw Nice age a nd excellent condition..
When buying a gun always have it examined by a competent g
...Click for more info
Made by Navy Aems this brass frame side hammer percussion rifle has no proof marks or markings , so may be end of production.Heavy barrel is 25 1/2" long X 1.15" wide and a super clean scant
...Click for more info
It is a short walk from Buckingham Palace to 26 St. James’ St., London, the address on the rib of the lovely percussion 10ga shotgun as a maker to the Royal family.. The name is liste
...Click for more info
A very clean tigh index and lock-up Colt SAA with a 4 3/4" barrel and sharp two line adress, ansd .45 Colt on left side.Full nickel with a few spots of corrison where it had laid ina leathe
...Click for more info
Clean and straight Sssprongfield 1903-A3 receiver With WWII serial number of 37634XX with clean and sharp barrel threads evident., finish is excellent and the left side safety area has some finish dis
...Click for more info
Many of my Thompson Center rifles are purchased from former employees and tney were allowed to build their own gun to personal specifications. So this is a one off carbine with a ``17 1/2" fully
...Click for more info
With a serial no.118977, 38 S&W, 4” ribbed round barrel with a partially bright about good bore showing some scattered light pitting and oxidation with otherwise strong rifling. The metal su
...Click for more info
Very clean and indexes and locks up tight. with a 5 1/2" octagonal barrel with very clran bore, and nipples are crisp amnd clean. Appears to have not been fired.Has matching serial number of : 18
...Click for more info
Measuring about 8 1/2" overall with a blued octagonal barrel of about 4 1/2" long, with a clean smooth bore .40 cal. Bore.The European walnut stock is clean with only minow handing wea
...Click for more info
A clean working Beretta .45 cal. plains belt pistol measuring about `15 1/4" lomg with a 9 1/2" lomng octagonal barrel with a very clean rifled bore. The hardwood stock is clean wiith no iss
...Click for more info
The Baby Dragoon model is similar in size to the Wells Fargo pocket model and is manufactured without a loading lever. The Baby Dragoon features a forged steel case hardened frame, a 5-shot cylinder w
...Click for more info
A rare model 1817 U.S Flintlock rifle with an 1821 date and U.S. Middletown lock-pate possibly Simeon North. The lock works good with profuse shower of sparks on the frizzen. The barrel of .54 c
...Click for more info
A quaint small form folding trigger bulldog revolver with a 1 1/2 long barrel that indexes and locks up and appears to be about .30 caliber.No numbers ir maker name so it was an export from Europe/ Fu
...Click for more info
CIVIL WAR Era Antique Engraved MOORE’S PATENT .32 Cal. Teat-Fire Revolver Front Loading Revolver That Circumvented S&W’s Patents, with a 3 1/4" round barrel, and the gun indexes g
...Click for more info