The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
It’s curved etched blade is 32” long and is 37 ½” overall in length. U.S. is on the right side of the etched blade and Epluribus Unum on the left side, Ames Mfg. Co. Chicope
...Click for more info
10-1/2 inch Damascus blade. Bone Horse head handle. Sheath is covered with a black velveteen and has some gold cordage trim. Quite an interesting piece.
Leroy Merz Antique Firearms specializ
...Click for more info
Antique Luristan Bronze Spearhead 1000BC 7 1/4nches long Relic
I am selling this for an estate. This item was on display in the owners office with the above title.I do not know if it is correct
...Click for more info
Very good condition 35 inch blade with some dark patina tarnish no corrosion. Desirable 1864 civil war are issued saber Looks like a JM inspector mark on the pommel.
MM insp
...Click for more info
model 1860 Made by Ames Mfg. Co.
Chicopee MASS.
Ancor
U.S.N.,P D.R,1862 markings
26 inch blade with original twisted brass wire leather handle wrap.
very nice aged mustered pati
...Click for more info
This is a handsome and well-made 18th, or early 19th century hunting sword or hanger that measures 23 5/8" overall, with an 18" curved, single-edged blade having wide single fullers. The bla
...Click for more info
Rare M1867 Peabody bayonet
Socket bayonet for use with the Model 1867 Peabody cartridge rifle This uncommon bayonet is identified by it’s dimensions and rather long Picasso compared to
...Click for more info
This piece is in good condition with signs of wear commensurate with age/use. Note: there are hairlines in the ivory handle. /// makers mark weak/// locks up tight///&nbs
...Click for more info
Description
ca 1840 Vauthier French Folding Bowie Knife. This is an early, rare, and near mint, unsharpened extended blade, lock back folding Bowie knife with carved ivory scales by the early and not
...Click for more info
CIVIL WAR U.S. MARINE CORPS NON COMMISSIONED OFFICER’S MODEL 1840 SWORD AND SCABBARD. 32” o/a with 24” blade relief etched in a floral cartouche “U.S.M.C.” and signed in
...Click for more info
CIVIL WAR AMES MFG. CO. U.S. MODEL 1850 FOOT OFFICER’S SWORD AND SCABBARD. 37” o/a with 31” blade decorated with floral and “US” martial motifs. Ricasso etched “AME
...Click for more info
This is a French M1771 Socket Bayonet, with a nearly15" triangular blade, 5.5" fuller on the upper face near the slightly damaged tip, scalloped shoulders, has maker's mark on the ricasso, 2
...Click for more info
This is a Civil War Era Spear Point Bowie and it has 14 1/8” blade, it is 2 3/16” wide and the spine is 15/31” wide. The blade is not marked and the handle is brass wire wrapped wa
...Click for more info
"31 ¼" bright blade. Blade is etched with arabesques and floral motifs. Ricasso is etched “D. MURRAY/Mobile. Casted hilt is sharp with “CS" in oval visible on the underside. Wire
...Click for more info
Fine Courtney & Tennant Marked Confederate Style D-Guard Bowie Knife
Description:
22" OAL, 17 1/4" clip point blade marked "COURTNEY & TENNANT/CHARLESTON, S.C." on the le
...Click for more info
This is a handsome sword that measures 39" overall, with a 33" straight, single-edged blade having narrow double fullers and half-length etched panels on both sides of the blade. The steel h
...Click for more info
"29 ¾" Bright blade. Blade is etched with patriotic motifs. One side is etched with cross cannons in a panoply of arms while the opposite side is etched with the first national flag. F
...Click for more info
14-1/2 inch blade is half Damascus and the lower half is made of 3 metal rods brought together at the point. The center rod has a twist and it makes this dagger stand out. The elephant head is ornatel
...Click for more info
"Post Civil War Era Bayonet. Stamped ""US"" at the base of the blade. Blade Measures 18"" with an Overall Length of 21"". De-Militarized with cut down the
...Click for more info
ID # 9127
Make LOT OF FOUR (4) CILVIL WAR ERE SWORDS; TOMESSON, MEYER, CLAUBER,
Model SABER, DRESS, NAVY BAYONETT
Configuration SWORDS
Gauge
...Click for more info
This is a French Model 1866 Chassepot bayonet built at Chatellerault in 1871. It measures 27 ½ inches overall with a 22 5/8 inch Yataghan blade with two fullers and flat spine marked with year a
...Click for more info
Extremely nice condition blade. Original braided brass wire leather handle. 2 very small nicks in blade edge. Unaltered unsharpened no corrosion 35 inch blade. Very nice tight brass mustard color pati
...Click for more info
Rare civil war Confederate Navy boarding Axe made by Brooks Bros Sheffield England. 1862 C.S.N markings. Very hard to find especially in this excellent condition. 16 inches over all length 7-1/2 wide
...Click for more info
This is a Civil War 1862 dated U.S. Naval Cutlass and was made by Ames Mfg. Co. /Chicopee Massachusetts and inspected by Daniel Reynolds. Only 25,000 were made compared to the 300,000 M1860 Light Cava
...Click for more info
"48" blade that is 1.5" wide. The guard has its original wood that has some wormholes and is slightly loose. This entire massive sword is 66" in total length. These giant swords w
...Click for more info
"Made circa 1860’s, 35 ¼" blade with smooth dull grey patina. Ricasso is unmarked. Wire wrapped leather grip is in very good condition. Scabbard is good with a few areas of discolorati
...Click for more info
"35" Slight curved blade, guard and blade have been cleaned at some point. Markings on ricasso remain sharp. Grip show's leather loss and cracking; wire wrap remains present.
...Click for more info
"34.5" slight curved blade, mottled grey patina is visible throughout. Ricasso is marked “U.S./C.E.W/1865. Leather and wire wrapping are present and in over all very good condition. Brass gu
...Click for more info
An Early Civil War Emerson & Silver Model 1860 Cavalry Sword Dated 1864 In Very Good Untouched Condition. All original and complete. The sword has very good metal including the blade, with very cl
...Click for more info
29 inch curved blade is nicely done with acid etching of the Swiss Cross. Tip of the blade shows some rust. Brass handle. Leather wrapped. The brass fitted scabbard may not belong to the sword and sho
...Click for more info
32 inch blade shows some brown color but basically free of pits. Nice markings. Brass handles. Nicely wrapped with braided brass strands. The scabbard comes in two pieces still looks pretty good.
L
...Click for more info
This is an impressive weapon that measures 42 1/8" overall, with a 35 3/8" straight, double-edged blade with engraved forte. The metal has an overall mottled gray patina with areas of freckl
...Click for more info
Overall length in scabbard 32"
Blade length 26.6"
Blade width 1.2"
The handle is made from horn.
There are some blade markings that we can't make out other than
...Click for more info
This is a handsome sword that measures 37" overall, with a 31" curved, single-edged blade having wide single fullers. The steel has a bright patina with some spots of dark freckling towards
...Click for more info
This is a Civil War 1862 dated U.S. Naval Cutlass and was made by Ames Mfg. Co. /Chicopee Massachusetts and it has a navy anchor above the 1862 date. Only 25,000 were made compared to the 300,000 M186
...Click for more info
This is a desirable US saber that measures 40 3/4" overall, with a 35" curved, single-edged blade having wide and narrow fullers. The steel has a bright patina with scattered areas of mild f
...Click for more info
This is a handsome saber, practically identical in configuration to the US Model 1860 Cavalry, that measures 39" overall, with a 33" curved, single-edged blade having wide and narrow fullers
...Click for more info
This is a British, 1856 Pattern Infantry Pioneer Sword and Scabbard made by Robert Mole of Birmingham. The British Army’s only saw-back sword, the Pattern 1856 Infantry Pioneer’s Sword, was a versatil
...Click for more info
"Made circa 1862. The blade is 32" long. The blade has a dark gray patina. The Ames marking on the ricasso is partially visible. The scabbard is in “barn" or attic condition.
...Click for more info
"Made in 1865. This sword is untouched with a mottled gray patina. All of the leather and wire wrapping are present and in very good condition. The brass guard and the scabbard have been cleaned.
...Click for more info
"Made in 1864. 35" blade. That has been cleaned. Markings are all nice and sharp. The scabbard is nickel plated. The leather is worn, but still present and the wire wrap while loose is prese
...Click for more info
27 inch curved blade etched with gilded floral motifs and military trophies on a blue background. The plated brass hilt has an Eagle head pommel and a plain D-shaped guard. Brass is dark with traces o
...Click for more info
"Made circa 1840s-1860s. This is a very fine presentation grade Ames 2840s style sword with a gilded scabbard guard and pommel. The guard is partially missing on one side. The grip is silver and
...Click for more info
"Made circa 1830. The blade is 30" long with acid etching. It is mostly bright with some light staining. The brass hilt is gilded and has a carved bone handle that is missing a large chip ne
...Click for more info
"Made in 1863. This is a cavalry saber by ames in very good original polish with very light staining to the blade. The leather on the grip is mostly dry rotted away and you can see bare wood, but
...Click for more info
"Made circa 1860s. 35" blade that is in the white. Blade has been cleaned as well as the scabbard. The grip has the leather fraying and is mostly bare wood with just the wire wrapping. There
...Click for more info
"Made circa 1860s. The blade measures 35.5" and has a mottled light gray patina. The grip has all of the leather and wire wrapping and the wire is tight. The scabbard has a dark brown, almos
...Click for more info