The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Sorry! You're too late.
The Marbles MSA Rare No 1 Clevis Axe GI# 100519253 has been sold.
Click here
to see what else is available by N.C. Ordnance Inc..
H.C. Booth & Co. was a Sheffield based firm of iron-founders. In 1856, Booth was listed alone in Norfolk Lane as a manufacturer of table knives, Bowie and dagger knives, and razors. Sheffiel
...Click for more info
Antique Brass Handled Dagger
I am selling this for an estate. Neither I or the heirs know anything about it. Depend on your own knowledge & expertise when . Shipping $12
...Click for more info
This is old probably 17th century, heavy duty and solid with two fullers on each side. The weight of this dagger is 1 lb. 10 oz. This is not maker marked but is for sure very old.
I would consider tr
...Click for more info
The blade is 25 5/8” long and 30 ½” overall. The blade has a fuller down the middle and stops about 1” from the tip. It has a second fuller below the spine and stops ¾
...Click for more info
This is an unmarked Calvary saber from the 1810 era and does not have the scabbard. It has a fuller under the spine and runs about 22 1/2” long. The blade thickness is 3/8” thick and it is
...Click for more info
This is a Nathan Starr Calvary Saber and was probably used in the War of 1812. The Ricasso is marked P over HHP for Henry H. Perkin S-I 1810-1816. This comes with the original scabbard. The leather gr
...Click for more info
This was most likely used in in the War of 1812. The Ricasso is stamped with P for proof over HHP for Henry H. Perkin and N. Starr. The leather covered grip has a small piece missing where the first f
...Click for more info
This Ames Foot Artillery Sword is not dated and does not have the American Eagle on either side. One side is marked US over A.D.K. and the other side has AMES MFG CO CHICOPEE MASS. The cross guard is
...Click for more info
This is the French 1831 Foot Artillery Sword. This was made at the Talabot Arsenal in Paris France. The sword and scabbard are number 725. The sword and scabbard are in very fine condition.
I would c
...Click for more info
33121-SUPERIOR ORIGINAL CIVIL WAR WEYERSBURG U.S. MODEL 1840 CAVALRY OFFICER’S SWORD AND SCABBARD CIRCA 1863. 42” o/a with 35” beautifully etched and engraved blade maker signed on r
...Click for more info
This knife is from the late Jim Dresslar Collection, relic hunter and owner of the American Frontier Museum in Bargersville, Indiana. Mr Dresslar had an outstanding collection of relics.
Overall 17.5
...Click for more info
Description
ca 1840 Vauthier French Folding Bowie Knife. This is an early, rare, and near mint, unsharpened extended blade, lock back folding Bowie knife with carved ivory scales by the early and not
...Click for more info
CIVIL WAR U.S. MARINE CORPS NON COMMISSIONED OFFICER’S MODEL 1840 SWORD AND SCABBARD. 32” o/a with 24” blade relief etched in a floral cartouche “U.S.M.C.” and signed in
...Click for more info
"The blade measures just shy of 22"" long with a light gray patina and some staining. This blade has a suguha hamon. The tang is signed Kuni Hiro. This wakazashi has nice mounting with
...Click for more info
"This blade measures approximately 25"" with a gray patina on the blade. The tang is mumei with one mekugiana. The saya and tsuba are naval.
...Click for more info
"This blade measures slightly over 24"" and is in good polish with Aa suguha hamon. The tang has three mekugiana and is suriage.
...Click for more info
No makers mark but possible F W Widmann manufactured 31 inch nearly straight blade. Blade is finished in blue and gold gilt etching and retains about half of those finishes. Hilt is gold washed with c
...Click for more info
29 inch curved blade is nicely done with acid etching of the Swiss Cross. Tip of the blade shows some rust. Brass handle. Leather wrapped. The brass fitted scabbard may not belong to the sword and sho
...Click for more info
32 inch blade shows some brown color but basically free of pits. Nice markings. Brass handles. Nicely wrapped with braided brass strands. The scabbard comes in two pieces still looks pretty good.
L
...Click for more info
27 inch curved blade etched with gilded floral motifs and military trophies on a blue background. The plated brass hilt has an Eagle head pommel and a plain D-shaped guard. Brass is dark with traces o
...Click for more info
Victorian era sword cane with 16th century rapier blade. Blade was forged in Toledo Spain by famous swordsmith Tomas Aiala. His signature is stamped by hand in the fuller and is consistent with other
...Click for more info
"Circa 1840-50s. Has an overall length of 42"" with a blade length of 36"". Referred as ""Old wrist breaker"". Has no markings. Blade is in good condition
...Click for more info
"Circa 1800. Dirk 11" long and is 15" overall. Blade is curved and has traces of etching. Grip is ivory with a lion pommel and chain. Scabbard is leather.
...Click for more info
"Circa 1800. Dirk has an 8" blade and is 11". Blue has 50% of the original blue and some of the gild. Grip is crudely carved ivory. Scabbard is engraved gilded brass. The back of the sc
...Click for more info
"Circa 1800. Dirk has a 10" curved blade and is 13 ½" in overall length. The blade has light staining. The grip is checkered ivory with a brass guard. Scabbard is leather with bra
...Click for more info
"Circa 1800. Dirk has a 9" blade and is 12 ¾" overall length. This dirk has a circular decorated guard with a circular ivory grip and a Lion pommel. The blade is acid etched. The
...Click for more info
"Circa 1800. Dirk has a 6 ¾" blade and is a 11" overall length. Grip is checkered ivory. Pommel and guard is brass. The scabbard is engraved brass and is marked with the maker nam
...Click for more info
"Circa 1800. Dirk has a 14" blade and is 19" overall length. The blade is decorated with blue and gilt. The scabbard is leather with a brass throat and drag.
...Click for more info
"Mexican Cutlass. Manufactured approximately 1870-1880 for the Army of Mexico. Blade is marked “A.C. Mexico" for A. Colubuzier, a supplier of military items to the army. The reverse is marke
...Click for more info
"Model of 1883 Imperial Japanese Navy officer's dagger. Very good condition with some cleaned pitting on the blade. Sheathe is in good condition with intact leather and much of the gilding on the
...Click for more info
"Blade: A slender ko-tanto with a nagasa of 9.125", straight form (hira-zukuri sugata) with no shinogi ridge. The blade is ubu (unaltered) with two mekugi-ana, and a silver-plated habaki acc
...Click for more info
"This is a fine Japanese tanto signed “Kanekuni" (??) of the Mino tradition, dating to the Koto period (late Muromachi, 16th century). The blade measures 12.125 inches (30.8 cm) and is mount
...Click for more info
"Blade: A massive omi-yari with a nagasa of 28" — unusually long for the type. The blade is of su-yari form, double-edged with a long central ridge and a deep bo-hi extending down the shaft.
...Click for more info
"1840 Musicians Sword by Ames made in 1864, 32"" blade with 30.75"" fuller. Blade is a dark grey patina with scattered furcae oxidation visible throughout. Ricasso is marked
...Click for more info
"Scottish Dirk by Wilson & Sharp. Made by Wilson and Sharp of Edinburg. Records show them in Edinburg in 1895. Silver mounts are marked with the “W & S" mark as well as city marking.
...Click for more info
"Scottish Highland Dirk. Silver mounted with the mounts having intertwining runic patterns. The blade has a clipped point and has an intricate worked back. The overall length is 16¾".
...Click for more info
"Circa 1860's Confederate short Pattern Artillery sword ""Gladiator"". Sword has no visible markings, blade is 18.75"" in length with a dark grey patina. Tip of the
...Click for more info
"U.S. Model 1872 Cavalry Saber Carried by Lt. Leighton Finley of the 10th Cavalry. This beautiful saber was carried by Lt. Leighton Finley of the 10th Cavalry. Lt. Finley is best known for his he
...Click for more info
"This is a late Edo period (Shin-shinto) katana with a blade length of 26.875 inches (68.3 cm), mounted in shira saya. The tang is ubu with one mekugi-ana, and is signed: ???? ??????? ??? “Respec
...Click for more info
"This Japanese wakizashi has a blade length of 18 7/16 inches (nagasa) and is mounted in full Edo-period koshirae. The tang bears a long dedicatory inscription on one side and a date reading Anse
...Click for more info