to Favorites
1 of 2
2 of 2
Lyman Pliars Type Reloading Tool
Lyman Pliars Type Reloading Tool
Click Photo to Enlarge
Guns International #: 100160448
Seller's Inventory #: #3
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller:
Big T
Member Since:
9/13/09
State:
Texas
Country:
United States
Phone:
(817) 269-3947
Number of Active Listings:
0
Seller:
Private Seller
Return Policy:
3 day inspection and return policy on used guns.
3 days
3 days
Payment Types Accepted:
postal money order, personal check
Lyman Pliars Type Reloading Tool
Description:
This is a cast aluminum pliars type reloading tool made by Lyman. It is in very good condition with approx. 30% black finish. It also comes with a screw-in primer which fits 30-06 based cases such as .270, 25-06, 30-06, and will work on 6.5 Jap (though not a perfect fit on the 6.5). It will probably work on many other rimless cases, but these are the ones I have tried. With the proper dies it can neck size, bullet seat, and prime and decap.
Also avail. is a 2-die set for 22-250 (Set includes decapper and bullet seater). Decapper needs replacement pin--might also neck size, not sure. Also available is a case sizer for .358; a neck sizer for something that measures .223; and a neck sizer for something that measures .262 (sorry, no markings on these last two). Dies are $2 ea. These dies fit the above listed reloading tool.
Buyer to pay $7 shipping. Prefer postal money order. Thank you.
SOLD
Description:
This is a cast aluminum pliars type reloading tool made by Lyman. It is in very good condition with approx. 30% black finish. It also comes with a screw-in primer which fits 30-06 based cases such as .270, 25-06, 30-06, and will work on 6.5 Jap (though not a perfect fit on the 6.5). It will probably work on many other rimless cases, but these are the ones I have tried. With the proper dies it can neck size, bullet seat, and prime and decap.
Also avail. is a 2-die set for 22-250 (Set includes decapper and bullet seater). Decapper needs replacement pin--might also neck size, not sure. Also available is a case sizer for .358; a neck sizer for something that measures .223; and a neck sizer for something that measures .262 (sorry, no markings on these last two). Dies are $2 ea. These dies fit the above listed reloading tool.
Buyer to pay $7 shipping. Prefer postal money order. Thank you.
SOLD
|
Click Photo to Enlarge
|
Guns International #: 100160448
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller:
Big T
Member Since:
9/13/09
State:
Texas
Country:
United States
Phone:
(817) 269-3947
Number of Active Listings:
0
Seller:
Private Seller
Return Policy:
3 day inspection and return policy on used guns.
3 days Payment Types Accepted:
postal money order, personal check
Lyman Pliars Type Reloading Tool
Description: This is a cast aluminum pliars type reloading tool made by Lyman. It is in very good condition with approx. 30% black finish. It also comes with a screw-in primer which fits 30-06 based cases such as .270, 25-06, 30-06, and will work on 6.5 Jap (though not a perfect fit on the 6.5). It will probably work on many other rimless cases, but these are the ones I have tried. With the proper dies it can neck size, bullet seat, and prime and decap. Also avail. is a 2-die set for 22-250 (Set includes decapper and bullet seater). Decapper needs replacement pin--might also neck size, not sure. Also available is a case sizer for .358; a neck sizer for something that measures .223; and a neck sizer for something that measures .262 (sorry, no markings on these last two). Dies are $2 ea. These dies fit the above listed reloading tool. Buyer to pay $7 shipping. Prefer postal money order. Thank you. SOLD |
Click Photo to Enlarge
Guns International #: 100160448
Seller's Inventory #: #3
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller:
Big T
Member Since:
9/13/09
State:
Texas
Country:
United States
Phone:
(817) 269-3947
Number of Active Listings:
0
Seller:
Private Seller
Return Policy:
3 day inspection and return policy on used guns.
3 days
3 days
Payment Types Accepted:
postal money order, personal check
Lyman Pliars Type Reloading Tool
Description:
This is a cast aluminum pliars type reloading tool made by Lyman. It is in very good condition with approx. 30% black finish. It also comes with a screw-in primer which fits 30-06 based cases such as .270, 25-06, 30-06, and will work on 6.5 Jap (though not a perfect fit on the 6.5). It will probably work on many other rimless cases, but these are the ones I have tried. With the proper dies it can neck size, bullet seat, and prime and decap.
Also avail. is a 2-die set for 22-250 (Set includes decapper and bullet seater). Decapper needs replacement pin--might also neck size, not sure. Also available is a case sizer for .358; a neck sizer for something that measures .223; and a neck sizer for something that measures .262 (sorry, no markings on these last two). Dies are $2 ea. These dies fit the above listed reloading tool.
Buyer to pay $7 shipping. Prefer postal money order. Thank you.
SOLD
Description:
This is a cast aluminum pliars type reloading tool made by Lyman. It is in very good condition with approx. 30% black finish. It also comes with a screw-in primer which fits 30-06 based cases such as .270, 25-06, 30-06, and will work on 6.5 Jap (though not a perfect fit on the 6.5). It will probably work on many other rimless cases, but these are the ones I have tried. With the proper dies it can neck size, bullet seat, and prime and decap.
Also avail. is a 2-die set for 22-250 (Set includes decapper and bullet seater). Decapper needs replacement pin--might also neck size, not sure. Also available is a case sizer for .358; a neck sizer for something that measures .223; and a neck sizer for something that measures .262 (sorry, no markings on these last two). Dies are $2 ea. These dies fit the above listed reloading tool.
Buyer to pay $7 shipping. Prefer postal money order. Thank you.
SOLD
Guns International #: 100160448
Seller's Inventory #: #3
Guns International #: 100160448
Seller's Inventory #: #3
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller:
Big T
Member Since:
9/13/09
State:
Texas
Country:
United States
Phone:
(817) 269-3947
Number of Active Listings:
0
Seller:
Private Seller
Return Policy:
3 day inspection and return policy on used guns.
3 days
3 days
Payment Types Accepted:
postal money order, personal check
Lyman Pliars Type Reloading Tool
Description:
This is a cast aluminum pliars type reloading tool made by Lyman. It is in very good condition with approx. 30% black finish. It also comes with a screw-in primer which fits 30-06 based cases such as .270, 25-06, 30-06, and will work on 6.5 Jap (though not a perfect fit on the 6.5). It will probably work on many other rimless cases, but these are the ones I have tried. With the proper dies it can neck size, bullet seat, and prime and decap.
Also avail. is a 2-die set for 22-250 (Set includes decapper and bullet seater). Decapper needs replacement pin--might also neck size, not sure. Also available is a case sizer for .358; a neck sizer for something that measures .223; and a neck sizer for something that measures .262 (sorry, no markings on these last two). Dies are $2 ea. These dies fit the above listed reloading tool.
Buyer to pay $7 shipping. Prefer postal money order. Thank you.
SOLD
Description:
This is a cast aluminum pliars type reloading tool made by Lyman. It is in very good condition with approx. 30% black finish. It also comes with a screw-in primer which fits 30-06 based cases such as .270, 25-06, 30-06, and will work on 6.5 Jap (though not a perfect fit on the 6.5). It will probably work on many other rimless cases, but these are the ones I have tried. With the proper dies it can neck size, bullet seat, and prime and decap.
Also avail. is a 2-die set for 22-250 (Set includes decapper and bullet seater). Decapper needs replacement pin--might also neck size, not sure. Also available is a case sizer for .358; a neck sizer for something that measures .223; and a neck sizer for something that measures .262 (sorry, no markings on these last two). Dies are $2 ea. These dies fit the above listed reloading tool.
Buyer to pay $7 shipping. Prefer postal money order. Thank you.
SOLD
Guns International Advertising Policy
This site's purpose is to bring gun buyers and gun brokers or sellers together by advertising guns or gun related items and services for sale online. If you are looking to buy guns in America or Internationally, you have come to the right place. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun related or gun services classifieds listed on this site. Buyers and sellers are required to know and comply with all applicable local, state and federal firearm laws.
This site's purpose is to bring gun buyers and gun brokers or sellers together by advertising guns or gun related items and services for sale online. If you are looking to buy guns in America or Internationally, you have come to the right place. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun related or gun services classifieds listed on this site. Buyers and sellers are required to know and comply with all applicable local, state and federal firearm laws.
Listings
Home
New Today
New This Week
Rifles
Shotguns
Handguns
Pistols
Revolvers
NFA
Gun Parts & Accessories
Services
Home
New Today
New This Week
Rifles
Shotguns
Handguns
Pistols
Revolvers
NFA
Gun Parts & Accessories
Services
©2006 - 2020 all rights reserved. | Guns International.com | v4.1-ww2
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2020 all rights reserved.
Guns International.com | ww2
Guns International.com | ww2