to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Fleming HK MP5SD 9mm Host with Fleming Machine Gun Sear in 4 Position Burst (0,1,3,F) Trigger Group
Fleming HK MP5SD 9mm Host with Fleming Machine Gun Sear in 4 Position Burst (0,1,3,F) Trigger Group
Click Photo to Enlarge
Guns International #: 103230244
Category - Class III - NFA - Full-Auto
- Class III - NFA - Suppressed
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Panhead57
Member Since: 11/21/11
State:
Texas
Zip: 77494
Country: United States
Total Listings: 46
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
***Only in the case of Material Misrepresentation*** a non-firing/non-turn inspection period-starts when gun arrives at dealer (gun must be in same condition if returned). NO RETURNS ON CLASS III NFA ITEMS.
***Only in the case of Material Misrepresentation*** a non-firing/non-turn inspection period-starts when gun arrives at dealer (gun must be in same condition if returned). NO RETURNS ON CLASS III NFA ITEMS.
Payment Methods: USPS Money Orders, Personal Checks or Wire Transfers
Fleming HK MP5SD 9mm Host with Fleming Machine Gun Sear in 4 Position Burst (0,1,3,F) Trigger Group
Description:
***Sale Pending*** For sale is a Fleming HK MP5SD SBR Host with a Fleming Transferable Sear, in excellent plus condition, that started out as a 1985 German pre-ban HK94 (Date Code “IF” – S/N 846X) and was subsequently converted by Fleming Firearms to an MP5SD with a Fleming Suppressor, 6” ported barrel, and Transferable Fleming Sear (originally installed in a clipped & pinned SEF trigger pack). “MP5SD” nomenclature was added to the top of the receiver and Fleming Firearm’s name and address along with the Sear’s serial number were added on the right side of the magazine well. The host was also equipped with a paddle mag release, an A3 (Date Code "IG"/Metal Backplate & Lever) telescoping stock, and post front & rear drum sighs. The bolt is marked “IF 425”.
The MP5SD ("SD" meaning Schalldämpfer, German for "sound suppressor") is an integrally suppressed submachine gun developed by Heckler & Koch in response to the special requirements of special operations forces. In addition to an integral suppressor, it was designed with a ported barrel that reduces the muzzle velocity of standard 9mm NATO ammunition to subsonic levels thus allowing it to operate with a significantly reduced sound signature in most environments, including when wet.
The Suppressor is 12” long and 1.63” in diameter and is removable to gain access to the barrel for cleaning. The Suppressor’s stainless steel construction and larger diameter are similar to early (pre-KAC) the HK “Large Suppressor” that was developed by Qual-A-Tec and then licensed to HK and manufactured in Chantilly to meet the US Navy’s need for a suppressor that was resistant to saltwater corrosion. It utilizes the same M18-1 thread pitch as factory MP5SD suppressors. An HK Barrel Port Brush (used only once to verify the suppressor’s thread pitch) will be included in the sale. The inside diameter of the Barrel Shroud (Cage) is approximately 1.78”.
In January 2024, the Fleming Sear (S/N H041X), was removed from its original SEF trigger group assembly and professionally installed in a new HK German factory MP5 4 Position burst trigger pack (0,1,3,F Pictogram) with a clipped & pinned MP5 Grip Housing by Mike Otte of Michael’s Machines in Edwardsville, Illinois. As part of the installation, the sear’s serial number was stamped on the side of trigger housing for easy reference. The sear, in its current 4 Position configuration, has been tested with various HK SBR hosts (MP5, HK53, and HK91), and runs flawlessly. It is currently set up with a 9mm ejector for use with 9mm hosts.
With the exception of the original SEF trigger group, this MP5SD retains all the original parts as built by Fleming Firearms. It was only test fired when I originally purchased it in 2006 and has been a safe queen for over 19 years.
New HK German factory 4 Position trigger groups, like the one this sear is installed in, currently cost over $3,200 as they have become increasingly scarce since their classification as restricted parts.
This is a three stamp package (Sear, Suppressor, and SBR) and all three items are on Form 4’s in Texas. Seller will pay 1st three tax stamps to transfer the items from Seller’s local FFL/SOT dealer to Buyer’s FFL/SOT dealer. Buyer will pay $63.5K (100% upfront) plus $200 shipping via insured USPS registered mail.
For information purposes, the last 2 paper Form 4s (from an individual to a FFL/SOT dealer) I submitted were approved within 45 days of submission.
Please message me with any questions or to request a link to an album with over 40 detailed photos and a video.
SOLD
Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO)
Description:
***Sale Pending*** For sale is a Fleming HK MP5SD SBR Host with a Fleming Transferable Sear, in excellent plus condition, that started out as a 1985 German pre-ban HK94 (Date Code “IF” – S/N 846X) and was subsequently converted by Fleming Firearms to an MP5SD with a Fleming Suppressor, 6” ported barrel, and Transferable Fleming Sear (originally installed in a clipped & pinned SEF trigger pack). “MP5SD” nomenclature was added to the top of the receiver and Fleming Firearm’s name and address along with the Sear’s serial number were added on the right side of the magazine well. The host was also equipped with a paddle mag release, an A3 (Date Code "IG"/Metal Backplate & Lever) telescoping stock, and post front & rear drum sighs. The bolt is marked “IF 425”.
The MP5SD ("SD" meaning Schalldämpfer, German for "sound suppressor") is an integrally suppressed submachine gun developed by Heckler & Koch in response to the special requirements of special operations forces. In addition to an integral suppressor, it was designed with a ported barrel that reduces the muzzle velocity of standard 9mm NATO ammunition to subsonic levels thus allowing it to operate with a significantly reduced sound signature in most environments, including when wet.
The Suppressor is 12” long and 1.63” in diameter and is removable to gain access to the barrel for cleaning. The Suppressor’s stainless steel construction and larger diameter are similar to early (pre-KAC) the HK “Large Suppressor” that was developed by Qual-A-Tec and then licensed to HK and manufactured in Chantilly to meet the US Navy’s need for a suppressor that was resistant to saltwater corrosion. It utilizes the same M18-1 thread pitch as factory MP5SD suppressors. An HK Barrel Port Brush (used only once to verify the suppressor’s thread pitch) will be included in the sale. The inside diameter of the Barrel Shroud (Cage) is approximately 1.78”.
In January 2024, the Fleming Sear (S/N H041X), was removed from its original SEF trigger group assembly and professionally installed in a new HK German factory MP5 4 Position burst trigger pack (0,1,3,F Pictogram) with a clipped & pinned MP5 Grip Housing by Mike Otte of Michael’s Machines in Edwardsville, Illinois. As part of the installation, the sear’s serial number was stamped on the side of trigger housing for easy reference. The sear, in its current 4 Position configuration, has been tested with various HK SBR hosts (MP5, HK53, and HK91), and runs flawlessly. It is currently set up with a 9mm ejector for use with 9mm hosts.
With the exception of the original SEF trigger group, this MP5SD retains all the original parts as built by Fleming Firearms. It was only test fired when I originally purchased it in 2006 and has been a safe queen for over 19 years.
New HK German factory 4 Position trigger groups, like the one this sear is installed in, currently cost over $3,200 as they have become increasingly scarce since their classification as restricted parts.
This is a three stamp package (Sear, Suppressor, and SBR) and all three items are on Form 4’s in Texas. Seller will pay 1st three tax stamps to transfer the items from Seller’s local FFL/SOT dealer to Buyer’s FFL/SOT dealer. Buyer will pay $63.5K (100% upfront) plus $200 shipping via insured USPS registered mail.
For information purposes, the last 2 paper Form 4s (from an individual to a FFL/SOT dealer) I submitted were approved within 45 days of submission.
Please message me with any questions or to request a link to an album with over 40 detailed photos and a video.
SOLD
Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO)
|
Click Photo to Enlarge
|
Guns International #: 103230244
Category - Class III - NFA - Full-Auto
- Class III - NFA - Suppressed
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Panhead57
Member Since: 11/21/11
State:
Texas
Zip: 77494
Country: United States
Total Listings: 46
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
***Only in the case of Material Misrepresentation*** a non-firing/non-turn inspection period-starts when gun arrives at dealer (gun must be in same condition if returned). NO RETURNS ON CLASS III NFA ITEMS. Payment Methods: USPS Money Orders, Personal Checks or Wire Transfers
Fleming HK MP5SD 9mm Host with Fleming Machine Gun Sear in 4 Position Burst (0,1,3,F) Trigger Group
Description: ***Sale Pending*** For sale is a Fleming HK MP5SD SBR Host with a Fleming Transferable Sear, in excellent plus condition, that started out as a 1985 German pre-ban HK94 (Date Code “IF” – S/N 846X) and was subsequently converted by Fleming Firearms to an MP5SD with a Fleming Suppressor, 6” ported barrel, and Transferable Fleming Sear (originally installed in a clipped & pinned SEF trigger pack). “MP5SD” nomenclature was added to the top of the receiver and Fleming Firearm’s name and address along with the Sear’s serial number were added on the right side of the magazine well. The host was also equipped with a paddle mag release, an A3 (Date Code "IG"/Metal Backplate & Lever) telescoping stock, and post front & rear drum sighs. The bolt is marked “IF 425”. The MP5SD ("SD" meaning Schalldämpfer, German for "sound suppressor") is an integrally suppressed submachine gun developed by Heckler & Koch in response to the special requirements of special operations forces. In addition to an integral suppressor, it was designed with a ported barrel that reduces the muzzle velocity of standard 9mm NATO ammunition to subsonic levels thus allowing it to operate with a significantly reduced sound signature in most environments, including when wet. The Suppressor is 12” long and 1.63” in diameter and is removable to gain access to the barrel for cleaning. The Suppressor’s stainless steel construction and larger diameter are similar to early (pre-KAC) the HK “Large Suppressor” that was developed by Qual-A-Tec and then licensed to HK and manufactured in Chantilly to meet the US Navy’s need for a suppressor that was resistant to saltwater corrosion. It utilizes the same M18-1 thread pitch as factory MP5SD suppressors. An HK Barrel Port Brush (used only once to verify the suppressor’s thread pitch) will be included in the sale. The inside diameter of the Barrel Shroud (Cage) is approximately 1.78”. In January 2024, the Fleming Sear (S/N H041X), was removed from its original SEF trigger group assembly and professionally installed in a new HK German factory MP5 4 Position burst trigger pack (0,1,3,F Pictogram) with a clipped & pinned MP5 Grip Housing by Mike Otte of Michael’s Machines in Edwardsville, Illinois. As part of the installation, the sear’s serial number was stamped on the side of trigger housing for easy reference. The sear, in its current 4 Position configuration, has been tested with various HK SBR hosts (MP5, HK53, and HK91), and runs flawlessly. It is currently set up with a 9mm ejector for use with 9mm hosts. With the exception of the original SEF trigger group, this MP5SD retains all the original parts as built by Fleming Firearms. It was only test fired when I originally purchased it in 2006 and has been a safe queen for over 19 years. New HK German factory 4 Position trigger groups, like the one this sear is installed in, currently cost over $3,200 as they have become increasingly scarce since their classification as restricted parts. This is a three stamp package (Sear, Suppressor, and SBR) and all three items are on Form 4’s in Texas. Seller will pay 1st three tax stamps to transfer the items from Seller’s local FFL/SOT dealer to Buyer’s FFL/SOT dealer. Buyer will pay $63.5K (100% upfront) plus $200 shipping via insured USPS registered mail. For information purposes, the last 2 paper Form 4s (from an individual to a FFL/SOT dealer) I submitted were approved within 45 days of submission. Please message me with any questions or to request a link to an album with over 40 detailed photos and a video. SOLD Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO) |
Click Photo to Enlarge
Guns International #: 103230244
Category - Class III - NFA - Full-Auto
- Class III - NFA - Suppressed
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Panhead57
Member Since: 11/21/11
State:
Texas
Zip: 77494
Country: United States
Total Listings: 46
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
***Only in the case of Material Misrepresentation*** a non-firing/non-turn inspection period-starts when gun arrives at dealer (gun must be in same condition if returned). NO RETURNS ON CLASS III NFA ITEMS.
***Only in the case of Material Misrepresentation*** a non-firing/non-turn inspection period-starts when gun arrives at dealer (gun must be in same condition if returned). NO RETURNS ON CLASS III NFA ITEMS.
Payment Methods: USPS Money Orders, Personal Checks or Wire Transfers
Fleming HK MP5SD 9mm Host with Fleming Machine Gun Sear in 4 Position Burst (0,1,3,F) Trigger Group
Description:
***Sale Pending*** For sale is a Fleming HK MP5SD SBR Host with a Fleming Transferable Sear, in excellent plus condition, that started out as a 1985 German pre-ban HK94 (Date Code “IF” – S/N 846X) and was subsequently converted by Fleming Firearms to an MP5SD with a Fleming Suppressor, 6” ported barrel, and Transferable Fleming Sear (originally installed in a clipped & pinned SEF trigger pack). “MP5SD” nomenclature was added to the top of the receiver and Fleming Firearm’s name and address along with the Sear’s serial number were added on the right side of the magazine well. The host was also equipped with a paddle mag release, an A3 (Date Code "IG"/Metal Backplate & Lever) telescoping stock, and post front & rear drum sighs. The bolt is marked “IF 425”.
The MP5SD ("SD" meaning Schalldämpfer, German for "sound suppressor") is an integrally suppressed submachine gun developed by Heckler & Koch in response to the special requirements of special operations forces. In addition to an integral suppressor, it was designed with a ported barrel that reduces the muzzle velocity of standard 9mm NATO ammunition to subsonic levels thus allowing it to operate with a significantly reduced sound signature in most environments, including when wet.
The Suppressor is 12” long and 1.63” in diameter and is removable to gain access to the barrel for cleaning. The Suppressor’s stainless steel construction and larger diameter are similar to early (pre-KAC) the HK “Large Suppressor” that was developed by Qual-A-Tec and then licensed to HK and manufactured in Chantilly to meet the US Navy’s need for a suppressor that was resistant to saltwater corrosion. It utilizes the same M18-1 thread pitch as factory MP5SD suppressors. An HK Barrel Port Brush (used only once to verify the suppressor’s thread pitch) will be included in the sale. The inside diameter of the Barrel Shroud (Cage) is approximately 1.78”.
In January 2024, the Fleming Sear (S/N H041X), was removed from its original SEF trigger group assembly and professionally installed in a new HK German factory MP5 4 Position burst trigger pack (0,1,3,F Pictogram) with a clipped & pinned MP5 Grip Housing by Mike Otte of Michael’s Machines in Edwardsville, Illinois. As part of the installation, the sear’s serial number was stamped on the side of trigger housing for easy reference. The sear, in its current 4 Position configuration, has been tested with various HK SBR hosts (MP5, HK53, and HK91), and runs flawlessly. It is currently set up with a 9mm ejector for use with 9mm hosts.
With the exception of the original SEF trigger group, this MP5SD retains all the original parts as built by Fleming Firearms. It was only test fired when I originally purchased it in 2006 and has been a safe queen for over 19 years.
New HK German factory 4 Position trigger groups, like the one this sear is installed in, currently cost over $3,200 as they have become increasingly scarce since their classification as restricted parts.
This is a three stamp package (Sear, Suppressor, and SBR) and all three items are on Form 4’s in Texas. Seller will pay 1st three tax stamps to transfer the items from Seller’s local FFL/SOT dealer to Buyer’s FFL/SOT dealer. Buyer will pay $63.5K (100% upfront) plus $200 shipping via insured USPS registered mail.
For information purposes, the last 2 paper Form 4s (from an individual to a FFL/SOT dealer) I submitted were approved within 45 days of submission.
Please message me with any questions or to request a link to an album with over 40 detailed photos and a video.
SOLD
Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO)
Description:
***Sale Pending*** For sale is a Fleming HK MP5SD SBR Host with a Fleming Transferable Sear, in excellent plus condition, that started out as a 1985 German pre-ban HK94 (Date Code “IF” – S/N 846X) and was subsequently converted by Fleming Firearms to an MP5SD with a Fleming Suppressor, 6” ported barrel, and Transferable Fleming Sear (originally installed in a clipped & pinned SEF trigger pack). “MP5SD” nomenclature was added to the top of the receiver and Fleming Firearm’s name and address along with the Sear’s serial number were added on the right side of the magazine well. The host was also equipped with a paddle mag release, an A3 (Date Code "IG"/Metal Backplate & Lever) telescoping stock, and post front & rear drum sighs. The bolt is marked “IF 425”.
The MP5SD ("SD" meaning Schalldämpfer, German for "sound suppressor") is an integrally suppressed submachine gun developed by Heckler & Koch in response to the special requirements of special operations forces. In addition to an integral suppressor, it was designed with a ported barrel that reduces the muzzle velocity of standard 9mm NATO ammunition to subsonic levels thus allowing it to operate with a significantly reduced sound signature in most environments, including when wet.
The Suppressor is 12” long and 1.63” in diameter and is removable to gain access to the barrel for cleaning. The Suppressor’s stainless steel construction and larger diameter are similar to early (pre-KAC) the HK “Large Suppressor” that was developed by Qual-A-Tec and then licensed to HK and manufactured in Chantilly to meet the US Navy’s need for a suppressor that was resistant to saltwater corrosion. It utilizes the same M18-1 thread pitch as factory MP5SD suppressors. An HK Barrel Port Brush (used only once to verify the suppressor’s thread pitch) will be included in the sale. The inside diameter of the Barrel Shroud (Cage) is approximately 1.78”.
In January 2024, the Fleming Sear (S/N H041X), was removed from its original SEF trigger group assembly and professionally installed in a new HK German factory MP5 4 Position burst trigger pack (0,1,3,F Pictogram) with a clipped & pinned MP5 Grip Housing by Mike Otte of Michael’s Machines in Edwardsville, Illinois. As part of the installation, the sear’s serial number was stamped on the side of trigger housing for easy reference. The sear, in its current 4 Position configuration, has been tested with various HK SBR hosts (MP5, HK53, and HK91), and runs flawlessly. It is currently set up with a 9mm ejector for use with 9mm hosts.
With the exception of the original SEF trigger group, this MP5SD retains all the original parts as built by Fleming Firearms. It was only test fired when I originally purchased it in 2006 and has been a safe queen for over 19 years.
New HK German factory 4 Position trigger groups, like the one this sear is installed in, currently cost over $3,200 as they have become increasingly scarce since their classification as restricted parts.
This is a three stamp package (Sear, Suppressor, and SBR) and all three items are on Form 4’s in Texas. Seller will pay 1st three tax stamps to transfer the items from Seller’s local FFL/SOT dealer to Buyer’s FFL/SOT dealer. Buyer will pay $63.5K (100% upfront) plus $200 shipping via insured USPS registered mail.
For information purposes, the last 2 paper Form 4s (from an individual to a FFL/SOT dealer) I submitted were approved within 45 days of submission.
Please message me with any questions or to request a link to an album with over 40 detailed photos and a video.
SOLD
Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO)
Guns International #: 103230244
Guns International #: 103230244
Category - Class III - NFA - Full-Auto
- Class III - NFA - Suppressed
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Panhead57
Member Since: 11/21/11
State:
Texas
Zip: 77494
Country: United States
Total Listings: 46
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
***Only in the case of Material Misrepresentation*** a non-firing/non-turn inspection period-starts when gun arrives at dealer (gun must be in same condition if returned). NO RETURNS ON CLASS III NFA ITEMS.
***Only in the case of Material Misrepresentation*** a non-firing/non-turn inspection period-starts when gun arrives at dealer (gun must be in same condition if returned). NO RETURNS ON CLASS III NFA ITEMS.
Payment Methods: USPS Money Orders, Personal Checks or Wire Transfers
Fleming HK MP5SD 9mm Host with Fleming Machine Gun Sear in 4 Position Burst (0,1,3,F) Trigger Group
Description:
***Sale Pending*** For sale is a Fleming HK MP5SD SBR Host with a Fleming Transferable Sear, in excellent plus condition, that started out as a 1985 German pre-ban HK94 (Date Code “IF” – S/N 846X) and was subsequently converted by Fleming Firearms to an MP5SD with a Fleming Suppressor, 6” ported barrel, and Transferable Fleming Sear (originally installed in a clipped & pinned SEF trigger pack). “MP5SD” nomenclature was added to the top of the receiver and Fleming Firearm’s name and address along with the Sear’s serial number were added on the right side of the magazine well. The host was also equipped with a paddle mag release, an A3 (Date Code "IG"/Metal Backplate & Lever) telescoping stock, and post front & rear drum sighs. The bolt is marked “IF 425”.
The MP5SD ("SD" meaning Schalldämpfer, German for "sound suppressor") is an integrally suppressed submachine gun developed by Heckler & Koch in response to the special requirements of special operations forces. In addition to an integral suppressor, it was designed with a ported barrel that reduces the muzzle velocity of standard 9mm NATO ammunition to subsonic levels thus allowing it to operate with a significantly reduced sound signature in most environments, including when wet.
The Suppressor is 12” long and 1.63” in diameter and is removable to gain access to the barrel for cleaning. The Suppressor’s stainless steel construction and larger diameter are similar to early (pre-KAC) the HK “Large Suppressor” that was developed by Qual-A-Tec and then licensed to HK and manufactured in Chantilly to meet the US Navy’s need for a suppressor that was resistant to saltwater corrosion. It utilizes the same M18-1 thread pitch as factory MP5SD suppressors. An HK Barrel Port Brush (used only once to verify the suppressor’s thread pitch) will be included in the sale. The inside diameter of the Barrel Shroud (Cage) is approximately 1.78”.
In January 2024, the Fleming Sear (S/N H041X), was removed from its original SEF trigger group assembly and professionally installed in a new HK German factory MP5 4 Position burst trigger pack (0,1,3,F Pictogram) with a clipped & pinned MP5 Grip Housing by Mike Otte of Michael’s Machines in Edwardsville, Illinois. As part of the installation, the sear’s serial number was stamped on the side of trigger housing for easy reference. The sear, in its current 4 Position configuration, has been tested with various HK SBR hosts (MP5, HK53, and HK91), and runs flawlessly. It is currently set up with a 9mm ejector for use with 9mm hosts.
With the exception of the original SEF trigger group, this MP5SD retains all the original parts as built by Fleming Firearms. It was only test fired when I originally purchased it in 2006 and has been a safe queen for over 19 years.
New HK German factory 4 Position trigger groups, like the one this sear is installed in, currently cost over $3,200 as they have become increasingly scarce since their classification as restricted parts.
This is a three stamp package (Sear, Suppressor, and SBR) and all three items are on Form 4’s in Texas. Seller will pay 1st three tax stamps to transfer the items from Seller’s local FFL/SOT dealer to Buyer’s FFL/SOT dealer. Buyer will pay $63.5K (100% upfront) plus $200 shipping via insured USPS registered mail.
For information purposes, the last 2 paper Form 4s (from an individual to a FFL/SOT dealer) I submitted were approved within 45 days of submission.
Please message me with any questions or to request a link to an album with over 40 detailed photos and a video.
SOLD
Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO)
Description:
***Sale Pending*** For sale is a Fleming HK MP5SD SBR Host with a Fleming Transferable Sear, in excellent plus condition, that started out as a 1985 German pre-ban HK94 (Date Code “IF” – S/N 846X) and was subsequently converted by Fleming Firearms to an MP5SD with a Fleming Suppressor, 6” ported barrel, and Transferable Fleming Sear (originally installed in a clipped & pinned SEF trigger pack). “MP5SD” nomenclature was added to the top of the receiver and Fleming Firearm’s name and address along with the Sear’s serial number were added on the right side of the magazine well. The host was also equipped with a paddle mag release, an A3 (Date Code "IG"/Metal Backplate & Lever) telescoping stock, and post front & rear drum sighs. The bolt is marked “IF 425”.
The MP5SD ("SD" meaning Schalldämpfer, German for "sound suppressor") is an integrally suppressed submachine gun developed by Heckler & Koch in response to the special requirements of special operations forces. In addition to an integral suppressor, it was designed with a ported barrel that reduces the muzzle velocity of standard 9mm NATO ammunition to subsonic levels thus allowing it to operate with a significantly reduced sound signature in most environments, including when wet.
The Suppressor is 12” long and 1.63” in diameter and is removable to gain access to the barrel for cleaning. The Suppressor’s stainless steel construction and larger diameter are similar to early (pre-KAC) the HK “Large Suppressor” that was developed by Qual-A-Tec and then licensed to HK and manufactured in Chantilly to meet the US Navy’s need for a suppressor that was resistant to saltwater corrosion. It utilizes the same M18-1 thread pitch as factory MP5SD suppressors. An HK Barrel Port Brush (used only once to verify the suppressor’s thread pitch) will be included in the sale. The inside diameter of the Barrel Shroud (Cage) is approximately 1.78”.
In January 2024, the Fleming Sear (S/N H041X), was removed from its original SEF trigger group assembly and professionally installed in a new HK German factory MP5 4 Position burst trigger pack (0,1,3,F Pictogram) with a clipped & pinned MP5 Grip Housing by Mike Otte of Michael’s Machines in Edwardsville, Illinois. As part of the installation, the sear’s serial number was stamped on the side of trigger housing for easy reference. The sear, in its current 4 Position configuration, has been tested with various HK SBR hosts (MP5, HK53, and HK91), and runs flawlessly. It is currently set up with a 9mm ejector for use with 9mm hosts.
With the exception of the original SEF trigger group, this MP5SD retains all the original parts as built by Fleming Firearms. It was only test fired when I originally purchased it in 2006 and has been a safe queen for over 19 years.
New HK German factory 4 Position trigger groups, like the one this sear is installed in, currently cost over $3,200 as they have become increasingly scarce since their classification as restricted parts.
This is a three stamp package (Sear, Suppressor, and SBR) and all three items are on Form 4’s in Texas. Seller will pay 1st three tax stamps to transfer the items from Seller’s local FFL/SOT dealer to Buyer’s FFL/SOT dealer. Buyer will pay $63.5K (100% upfront) plus $200 shipping via insured USPS registered mail.
For information purposes, the last 2 paper Form 4s (from an individual to a FFL/SOT dealer) I submitted were approved within 45 days of submission.
Please message me with any questions or to request a link to an album with over 40 detailed photos and a video.
SOLD
Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO)
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3