to Favorites
Order By
Gun Parts - Rifle
GI#: 102856232
Stock taken off of a Ruger M77. This is for a long action only. All wear marks pictured.
$155...buyer pays shipping and insurance
***NO CREDIT CARD FEES***
W. Johnson Service Inc.&n
...Click for more info
Seller: Johnsonsguns
Area Code: 517
$155.00
This is a commercial set that has a rectangular slip-on cover for the rear ladder sight, and a friction-fit combination muzzle and front sight cover.
The rear sight protector has a hinged, maroon bai
...Click for more info
Seller: Joe Salter com
Area Code: 603
$295.00
GI#: 102851780
100% finish $15 shipping
...Click for more info
Seller: Schultheis Sporting Goods
Area Code: 607
$80.00
GI#: 102848879
This is a Lyman 36 reciever sight for early Manlicher-Haenel rifles.
Mounting block included.
Fold down aperture intact and functional.
Windage arm swings back on bolt operation.
Large size.
Atta
...Click for more info
Seller: VintageGS
Area Code: 509
$425.00
GI#: 102843453
95% inletted stock in AA grade walnut for standard large ring Mausers, right hand, mil barrel channel. One has a cheekpiece, the other is a normal montecarlo with a right hand palm swell and a wider f
...Click for more info
Seller: doublegunhq
Area Code: 325
$265.00
GI#: 102843452
For 93, 95 Mausers (small ring short action) w mil barrel channel, these are better grade walnut stocks with minor blems, 95% inletted with Rosewood grip and tip with maple spacers, with Monte
...Click for more info
Seller: doublegunhq
Area Code: 325
$245.00
NIB Original Kimber of Oregon Model 4000 Lever Rings for grooved receiver. These same rings on eBay are $365. Also have a couple sets of rings for flat top bases and a few Vertical Split rings
...Click for more info
Seller: Gary Wolfe
Area Code: 704
$200.00
GI#: 102838096
#228MS Unknown large peep sight to mount on barrel, 9” long, adjustable for elevation, probably for a muzzle loading rifle, very well made. $75
...Click for more info
Seller: Jim Goergen
Area Code: 507
$75.00
GI#: 102838094
#227MS King #200 micrometer tang sight for Stevens rifles, 1 1/2” hole spacing, 2 1/8” staff, bottom of base stamped V2, push button to fold down, exc. condition. $350
...Click for more info
Seller: Jim Goergen
Area Code: 507
$350.00
GI#: 102838093
#226MS Marbles tang sight for Marlin or Ballard rifles, 1 1/8” hole spacing, like new. $150
...Click for more info
Seller: Jim Goergen
Area Code: 507
$150.00
GI#: 102838088
#224MS Lyman #1 Rem. tang sight, 1 15/16” hole spacing, 2” staff, initial R stamped on bottom of base, exc. condition with screws. $275
...Click for more info
Seller: Jim Goergen
Area Code: 507
$275.00
GI#: 102838086
#223MS Lyman Marlin tang sight, with locking lever, 1 1/8” hole spacing, 1 1/4” staff, like new. $175
...Click for more info
Seller: Jim Goergen
Area Code: 507
$175.00
GI#: 102838084
#221MS Parker Hale tang sight for Win. rifles, 2 3/16” hole spacing, 2” staff, new condition. $195
...Click for more info
Seller: Jim Goergen
Area Code: 507
$195.00
GI#: 102838080
#219MS Stevens new mid rang vernier #100 tang sight, 1 1/2” hole spacing, 2 9/16” staff, VG condition. $370
...Click for more info
Seller: Jim Goergen
Area Code: 507
$370.00
GI#: 102838079
#218MS Stevens original mid range vernier tang sight, #5 stamped on bottom of base, 1 1/2” hole spacing, 3 1/8” staff, mint condition. $450
...Click for more info
Seller: Jim Goergen
Area Code: 507
$450.00
GI#: 102838077
#217MS Maynard original tang sight, no graduations, 7/8” hole spacing, 3 1/2” staff, exc. condition. $485
...Click for more info
Seller: Jim Goergen
Area Code: 507
$485.00
GI#: 102838076
#216MS Maynard original tang sight, no graduations, 7/8” hole spacing, 3 1/2” staff, exc. condition. $450
...Click for more info
Seller: Jim Goergen
Area Code: 507
$450.00
GI#: 102838071
#214MS Ballard original tang sight, 1 1/8” hole spacing, 3 1/8” staff, VG to exc. condition with screws. $350
...Click for more info
Seller: Jim Goergen
Area Code: 507
$350.00
GI#: 102838065
#212MS Original Soule vernier tang sight for Ballard or marlin rifles, adjustable for windage & elevation, 1 1/8” hole spacing, 2 3/4” staff, exc. condition with screws.
...Click for more info
Seller: Jim Goergen
Area Code: 507
$995.00
GI#: 102837667
Winchester Shotgun Grip Caps
Winchester Model 70 Rifle Grip Caps With Index Lugs
Fits Both
1 3/4" X 1 5/16"
The Finest Quality Reproduction Urethane Grip Caps.
...Click for more info
Seller: N.C. Ordnance Inc.
Area Code: 252
$15.00
GI#: 102837310
#207MS Unknown adjustable peep sight, 1 1/4” hole spacing, adjustable for windage & elevation, VG condition. $85
...Click for more info
Seller: Jim Goergen
Area Code: 507
$85.00
GI#: 102837305
#205MS Win. original long range tang sight, 2 3/16” hole spacing, 4 1/4” staff graduated 0-50, exc. condition. $550
...Click for more info
Seller: Jim Goergen
Area Code: 507
$550.00
GI#: 102835576
This stock is the last Vixen Mannlicher stock I acquired approximately 24 years ago when Beretta took over Sako. Having an abundance of Mannlicher stocks, I would modify them to be standard stoc
...Click for more info
Seller: Buckhorn813
Area Code: 207
$795.00
GI#: 102833699
#194MS Lyman tang sight for Frank Wesson rifles, 1 1/4” hole spacing, exc. condition. $185
...Click for more info
Seller: Jim Goergen
Area Code: 507
$185.00
GI#: 102833696
#193MS Lyman dual aperture tang sight for Stevens rifles, 1 1/2” hole spacing, exc. condition with screws. $175
...Click for more info
Seller: Jim Goergen
Area Code: 507
$175.00
#192MS Early Stevens vernier tang sight for the Stevens Side Plate Model that were made in the 1800’s, 1 1/2” hole space, 3 1/2” casehardened staff, adjustable for elevation
...Click for more info
Seller: Jim Goergen
Area Code: 507
$495.00
GI#: 102833689
#190MS Stevens #102 tang sight, 1 1/2” hole spacing, 2 1/2” staff, VG condition with screws. $250
...Click for more info
Seller: Jim Goergen
Area Code: 507
$250.00
GI#: 102833687
#189MS Stevens #102 tang sight, 1 1/2” hole spacing, 2 3/8” staff, VG condition. $245
...Click for more info
Seller: Jim Goergen
Area Code: 507
$245.00
GI#: 102833682
#186MS Stevens #100 mid range vernier tang sight, Hadley disk with 6 holes, 1 1/2” hole spacing, 2 3/4” staff, adjustable for windage however screw is missing, VG condition with sc
...Click for more info
Seller: Jim Goergen
Area Code: 507
$275.00
GI#: 102833680
#185MS Stevens #100 mid range vernier tang sight, Hadley disk with 6 holes, 1 1/2” hole spacing, 2 3/4” staff, VG to exc. condition. $325
...Click for more info
Seller: Jim Goergen
Area Code: 507
$325.00
GI#: 102833677
#184MS Stevens #100 mid rang vernier tang sight, Hadley disk with 6 holes, 2” hole spacing, 2 3/4” staff, exc. condition. $375
...Click for more info
Seller: Jim Goergen
Area Code: 507
$375.00
GI#: 102833673
#181MS Marbles Simplex tang sight, no screws, 1 11/16” hole spacing, exc. condition. $150
...Click for more info
Seller: Jim Goergen
Area Code: 507
$150.00
GI#: 102833671
#180MS Marbles Simplex tang sight with screws, 1 1/16” hole spacing, exc. condition. $175
...Click for more info
Seller: Jim Goergen
Area Code: 507
$175.00
GI#: 102833668
#178MS Lyman #15 tang sight for Stevens rifles, adjustable for windage & elevation, in VG condition, scarce. $350
...Click for more info
Seller: Jim Goergen
Area Code: 507
$350.00
GI#: 102833664
#177MS Marbles Simplex tang sight for Savage or Marlin rifles, 1 1/8” hole spacing, 1 5/8” staff, scarce, exc. condition. $165
...Click for more info
Seller: Jim Goergen
Area Code: 507
$165.00
GI#: 102833644
#175MS Marbles tang sight for Stevens rifles, 1 1/2” hole spacing, 2” height staff, exc. condition. $185
...Click for more info
Seller: Jim Goergen
Area Code: 507
$185.00
GI#: 102833642
#173MS Lyman tang sight for Bullard rifle, 2 1/8” hole spacing, good condition. $135
...Click for more info
Seller: Jim Goergen
Area Code: 507
$135.00
GI#: 102833641
#172MS Marbles tang sight for Maynard rifle, 7/8” hole spacing, exc. condition. $185
...Click for more info
Seller: Jim Goergen
Area Code: 507
$185.00
GI#: 102827473
A lever from a 1900 mfg. rifle with silver grey finish and in excellent condition.
...Click for more info
Seller: Joe Salter com
Area Code: 603
$95.00
GI#: 102825308
This is an original Sheard #38 Front blade. The sight is in excellent condition with almost all of the original bluing left. Dimensions .440 W X .470 H X .716 L.
...Click for more info
Seller: Joe Salter com
Area Code: 603
$45.00
Last sight assy. #4 Model 81 SALE PENDING!
I have 4 complete sight assemblies for the Remington Model 8 & 81. Price shown $100 is per each assembly (one only)! Your choice, please indic
...Click for more info
Seller: RLB45
Area Code: 623
$100.00
NIB Kimber of Oregon DELUXE Scope Rings. Verticle Split. $8 shipping. Buy 2 or more and FREE shipping.
...Click for more info
Seller: Gary Wolfe
Area Code: 704
$150.00
GI#: 102821709
This is an excellent assortment of 10 vintage Front Dovetail Sights from different makers and will fit many applications. Please see photo's for fine details.
...Click for more info
Seller: Joe Salter com
Area Code: 603
$79.00
GI#: 102821301
LEUPOLD ONE PICE BASE ((((FOR REMINGTON SHORT ACTION 700
...Click for more info
Seller: SABO
Area Code: 417
$29.98
GI#: 102814826
SEE THE PICTURES OF AR-15 BINGHAM LTD ATLANTA GA. USA CAL. .22LR CONVERSION KIT IN EXCELLENT FACTOTY ORGINAL CONDITION, FULL SET IN THE ORIGINAL CASE AND FACTORY INSTRACTION.
PRICE $275 PLUS $25
...Click for more info
Seller: Dimitri Tolchinski
Area Code: 860
$275.00
GI#: 102810957
A custom barrel made by Al Biesen at his Gun Shop in Spokane, WA. Sometimes custom gun owners just want a different caliber barrel, this looks to be a take off from one of his custom rifles. Barrel wa
...Click for more info
Seller: Steelshooter556
Area Code: 509
$300.00
Seller: GUNPRIME
Area Code: 205
$499.00
GI#: 102808373
SEE THE PICTURES OF SAIGA 12 GAUGE SHOTGUN 12 RDS 3 NEW CONDITION MAGAZINES MADE BY SUREFIRE GUN MAGS LLC. IN USA WITH 5 YEARS FACTORY WARRANTY.
PRICE FOR EACH MAGAZINE IS $45 PLUS $15 SHI
...Click for more info
Seller: Dimitri Tolchinski
Area Code: 860
$45.00
GI#: 102806930
A custom barrel made by Al Biesen at his Gun Shop in Spokane, WA. Sometimes custom gun owners just want a different caliber barrel, this looks to be a take off from one of his custom rifles. Barrel wa
...Click for more info
Seller: Steelshooter556
Area Code: 509
$400.00
GI#: 102800825
Varmint free flow tube for AR-15 comes with two bipod studs on the front can also be used for sling tube is made of 2 in 6061 aluminum black anodized crunkel's in the center of the tube finishes mil-s
...Click for more info
Seller: Mbuilt
Area Code: 954
$115.00
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3