Guns International #: 102461881
Seller's Inventory #: 1007

Category - 1911 Pistols - Kimber Pistols

Category
1911 Pistols
Kimber Pistols

BHAdvancedCarry SFS 1911 9x19mm 3" Barrel from Kimber Ultra-Carry II by BHCustomShop / BHSpringSolutions

Description:
BHAdvancedCarry SFS 1911 9x19mm 3" Barrel from Kimber Ultra-Carry II by BHCustomShop / BHSpringSolutions

Description:
STUNNING!  AND NEW!

Slide/Frame/Barrel: Manufactured by Kimber in U.S.A.

ALL COMPONENTS INSTALLED IN/ON SLIDE/FRAME ARE NEW FROM BHSpringSolutions:

Built and Tuned with BHSpringSolutions Optimized Springs for 1911.

BHAdvanced SFS (Safety-Fast-Shooting) Operating System brings 20 Benefits to the 1911 design: 

The 20 Benefits of the 1911 SFS System

•  SFS System allows the 1911 to be carried Condition 1, but in a Hammer Forward state.  When the Manual Safety (termed the “Cocking Lever” with the SFS system) is swiped off, the hammer simultaneously springs to the cocked/ready to fire position by action of a Spring.
•  Because of the rounded hammer profile and hammer-forward “carry” position of the hammer, the 1911 can be carried Condition 1 and eliminate common “snagging” in clothing of a cocked Hi Power hammer.  
•  Most comfortable hammer for Carry (doesn’t dig into your side-fat when carried IWB on the hip). 
•  Best Solution for More Sure and Fast One Handed Deployment of the 1911.
•  Enables “Hammer Forward Carry”, (like a DA/SA handgun), with the superior benefit of every shot being the same Single Action Trigger Pull.
•  BHAdvanced Extended Slide Stop/Slide Release…Making all the 1911 Controls easily within reach of the thumb of the shooting hand, without releasing or adjusting grip on the 1911.
•  Adds Ambidextrous Safety.
•  Cleaner / Crisper Trigger Break (without a "Trigger Job") - Due to Superior Sear / Hammer-Tooth Relationship
• When in On-Safe Condition, Trigger / Slide / Hammer are Locked and Grip Safety and Hammer-Drop-Safety are Active.  When gripped in the hand and SFS Safety is "Swiped" Downward, ALL Active & Passive Safeties are deactivated and 1911 is ready to fire. 
•  Adds an Industry Exclusive “Hammer-Drop Safety” to the 1911.
•  Persons who miss-out on the benefits of the 1911 because they don’t like “Cocked and Locked” Carry, for any reason, can usually embrace Condition 1 SFS Hammer Forward Carry.
•  The SFS System Replaces Two Springs in a 1911: Hammer (Main) Spring & Plunger Spring, and adds a new “Return Spring” in the SFS Hammer Assembly that is the cause of the Hammer’s Cocking Action when the Safety is swiped off.  In the opinion of BHSpringSolutions LLC, the design of SFS springs is appropriate for the jobs these springs perform and none of these springs could be considered “over-worked”.
•  Seeing the Hammer Forward provides visual confirmation that the 1911 is “on safe”.  Eliminates all “THAT HAMMER IS COCKED!” concerns.
•  Transition to SFS is seamless for Cocked and Locked carriers of the 1911.
•  Safe Condition 1 Carry, easily embraced by 1911 owners currently using a “Condition 2 or Condition 3 Carry.  (Also safer because of the “no-snag” hammer.)
•  MAY buy you a few extra seconds to access your Back-Up Weapon if an attempted Gun Grab is successful and your 1911 ends up in a bad-guys hand.  The SFS System is different and may cause momentary confusion for an attacker who gains control or your 1911.  In the SFS Carry Condition 1, the Hammer is Locked and cannot be manually cocked.  The Slide is Locked and cannot be racked.  When the Safety is disengaged, it causes the hammer to spring rearward – again, different, and may cause momentary confusion for an attacker in a Gun Grab.  At a minimum, in a “Gun Grab” situation, your 1911 might be more difficult for an attacker to deploy than any “non-manual-safety” semi-auto pistol.  SFS has Tactical Safety Advantages over ANY other operating system on any handgun.
• No Change to 1911 Field Strip procedure. 
•  If shooter tends to “ride the manual safety” with shooting thumb during shooting, nothing changes.  But, since the SFS Manual Safety cannot be “cammed up” with the thumb (only by manually pushing forward the hammer), SFS eliminates the chance of the thumb riding up under the safety and inadvertently engaging the safety.
• BHAdvanced Convertible Tactical Ambidextrous Magazine Catch - Easier to Manipulate / Faster-Mag-Changes
• Decocking the hammer no longer requires a dangerous maneuver of pulling the trigger and easing the hammer forward.                                              

BHAdvanced Modular Grip System w/ BHMastersGrips Heirloom-Grade Walnut Grip Panels
Includes: 
BHMastersGrips Heirloom-Grade Walnut 1911 Grip Panels
Pearce Rubber 1911 Grip Panels
BOTH Grip Panel Sets can be used With OR Without the: Pearce Rubber "UNDER-GRIP" w/ Front Finger-Grooves (Shown In Some Pictures).

THE WOOD of BHMastersGrips Heirloom-Grade 1911 Walnut Grips:
The Highest known Grade of Walnut, on our planet – some “wavy grained”, some “tiger grained”, etc.  High grades of Walnut are available worldwide, but this ultra-high-grade of Walnut is currently only available in Bulgaria and Turkey – and, it is expensive.  The result this Walnut produces is just jaw-dropping eye-popping gorgeous.
The Finish of These BHSS Heirloom-Grade MastersGrips:
It’s called “BHSS-Hi-Polished-Finish”.  Multiple layers of Varnish are used to coat the surface followed by extensive polishing work. The entire finishing process required for each pair of Heirloom-Grade MastersGrips requires one week of applications and polishing with each additional layer providing additional protection to the underlying surface. When complete, the BHSS-Hi-Polished-Finish provides a waterproof, stain resistant, scratch resistant, glossy surface.  Unlike some gloss walnut finishes that love to show scratches and wear, the BHSS-Hi-Polished-Finish result is as tough as it is beautiful.
Do we actually suggest using Heirloom-Grade MastersGrips for actual shooting?  YES!!!!! 
BHSS Heirloom-Grade MastersGrips are made with the 1911 center-of-grip-swell design for excellence in “feel” and “control” of the Hi-Power pistol.  Shooting with grips this beautiful?  That’s your call, of course – we’ve made them to be as Tactically Superior as they are beautiful.

Magazines: (3)
8-Round Flush Fit (2)
10-Round Mecgar Plastic Base Plate (1)

Meprolight Night Sights with Hi-Day-Viz Front Sight


SHIPPING NOTES AND FFL Business-Relationship Disclosure: 
FFL USPS PRIORITY INSURED SHIPPING: $47.00  (Insured Amount: $2,500.00)

BHCustomShop Service Dept is a partner at TC Custom Coatings LLC (FFL).  All BHMasterpiece and BHAdvancedCarry Firearms are produced by BHSpringSolutions LLC / BHCustomShop at TC Custom Coatings LLC. 

TC Custom Coatings LLC is an OEM Metal Finisher to Fireams Manufacturers, and Applicator of BHFinishes / BHRefinishes per BHSpringSolutions' Requirements & Specifications.   Firearm that is the subject of this listing is in READY-TO-DELIVER Status in TC Custom Coatings LLC's Inventory.

New Owner of this BHAdvancedCarry 1911 is invited to Schedule an Orientation with a BHSpringSolutions' Representative to Review all functions and maintenance best-practices for this firearm.  

SOLD

Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO)
Condition: NEW