Click Photo to Enlarge
|
Guns International #: 102576550
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: The Hi Power Medic, LLC
Company: The Hi Power Medic, LLC
Return Policy: 3 day inspection and return policy on used guns.
Payment Methods: Visa, Mastercard, Discover, Money Order, AMEX
BHAdvanced Masterpiece Browning .40 S&W Hi-Power
Description:
From the World's Hi-Power Specialists! BHSpringSolutions LLC / BHCustomShop Service Dept. at The Hi-Power Medic
2 Hi-Powers in 1 ! 2 Complete Slide Assemblies, 1 for 9x19mm and 1 for .40S&W.
DUAL-CALIBER! BHAdvanced Masterpiece .40S&W / 9mm SFS Hi-Power, Belgium Browning Hi-Power Customized in BHCustomShop / The Hi-Power Medic LLC
ALSO! Includes BHSpringSolutions Limited Edition Slide On / Off Expanded Mag Well Package:
BHSpringSolutions' Slide On / Off Expanced Mag Well
BH Heirloom-Grade Walnut MastersGrips Inlaid in Aluminum Grip Panels that are compatibile with Mag Well or can be used without the Expanded Mag Well attached.
2 - Flush Fit Magazine Baseplates for use with Expanded Mag Well
Slide/Frame: Manufactured by FN Herstal, Belgium
Frame / .40S&W Slide Finish: BHPerformance BLACK. 9mm Slide: Original Nickel Stainless
ALL COMPONENTS INSTALLED IN SLIDE/FRAME ARE NEW FROM BHSpringSolutions:
Built and Tuned with BHSpringSolutions Optimized Springs for Hi-Powers
BHAdavnced SFS (Safety-Fast-Shooting) Operating System brings 20 Benefits to the Hi-Power design:
The 20 Benefits of the FAST SAFETY (SFS) System for Hi Powers and Hi Power Clones
- SFS System allows the Hi Power to be carried Condition 1, but in a Hammer Forward state. When the Manual Safety (termed the “Cocking Lever” with the SFS system) is swiped off, the hammer simultaneously springs to the cocked/ready to fire position by work of a Spring.
- Because of the almost flat hammer profile and hammer-forward “carry” position of the hammer, the Hi Power can be carried Condition 1 and eliminate common “snagging” in clothing of a cocked Hi Power hammer.
- Most comfortable hammer for Carry (doesn’t dig into your side-fat when carried IWB on the hip) Makes the Hi Power feel more like a Striker-Fired Concealed Carry handgun, except better because of the Hi Powers thin profile.
- Best Solution for More Sure and Fast One Handed Deployment of the Hi Power.
- Enables “Hammer Forward Carry”, (like a DA/SA handgun), with the superior benefit of every shot being the same Single Action Trigger Pull.
- Adds an Extended Slide Stop/Slide Release…Making all the Hi Powers Controls easily within reach of the thumb of the shooting hand, without releasing or adjusting grip on the Hi Power.
- Adds Ambidextrous Safety to older Hi Powers with one-sided safety.
- Better / Lighter Trigger Pull – Many SFS users have reported a Trigger Break Reduction of ½ – 1 ¼ lbs after installing SFS. This is attributable to two things. The SFS Main Spring is 30 lb, and dimensionally shorter than the FN/Browning OEM 32 lb Main Spring. Less pressure on the Sear/Hammer Tooth Relationship will typically create a reduction in trigger pull weight.
- Cleaner/Crisper Trigger Break – The SFS System is a group of parts and springs that replace certain parts of the Traditional Operating System. Two parts replaced are the Sear and Hammer. Typical feedback from gunsmiths: “The SFS Hammer and Sear are extremely well made, and typically superior to the FN/Browning OEM Sear/Hammer. It is not uncommon for a non-modified Browning trigger pull to go like this: “Take up…….wall……you think you’re at the “break” of the trigger……then you pull a little more into a “zone” that allows the trigger to pull a little more and yet still the trigger doesn’t break…..so with more pressure……..FINALLY!……..the hammer falls!” The SFS Sear/Hammer set typically eliminates THAT! (Note: All results do vary slightly)
- Adds a “Drop Safety” to the Hi Power (that doesn’t degrade trigger pull!) When in the “On Safe” position, both Slide and Hammer are locked.
- Persons who miss-out on the benefits of Hi Power Carry because they don’t like “Cocked and Locked” Carry, for any reason, can usually embrace Condition 1 SFS Hammer Forward Carry.
- The SFS System Replaces Three Springs in a Hi Power: Hammer (Main) Spring, Safety Lever Spring, the flat metal Sear Spring, and adds a new “Return Spring” that is the cause of the Hammer’s Cocking Action when the Safety is swiped off. BHSpringSolutions LLC manufactures Optimized SFS Main Spring, Cocking Lever Spring, and Return Spring. In the opinion of BHSpringSolutions LLC, the design of SFS springs is appropriate for the jobs these springs perform and none of these springs could be considered “over-worked”.
- Seeing the Hammer Forward provides visual confirmation that the Hi Power is “on safe”. Eliminates all “THAT HAMMER IS COCKED!” concerns.
- Transition to SFS is seamless for Cocked and Locked carriers of the Hi Power.
- Safe Condition 1 Carry, easily embraced by Hi Power owners currently using a “Condition 2 or Condition 3 Carry. (Also safer because of the “no-snag” hammer.)
- MAY buy you a few extra seconds to access your Back-Up Weapon if an attempted Gun Grab is successful and your Hi Power ends up in a bad-guys hand. The SFS System is different and may cause momentary confusion for an attacker who gains control or your Hi Power. In the SFS Carry Condition 1, the Hammer is Locked and cannot be manually cocked. The Slide is Locked and cannot be racked. When the Safety is disengaged, it causes the hammer to spring rearward – again, different, and may cause momentary confusion for an attacker in a Gun Grab. At a minimum, in a “Gun Grab” situation, your Hi Power might be more difficult for an attacker to deploy than any “non-manual-safety” semi-auto pistol. SFS has Tactical Safety Advantages over ANY other operating system on any handgun.
- Fastest Hi Power Field Strip procedure. User no longer needs to lock back the slide, to remove the Slide Stop/Slide Release. Simply push out Slide Stop wh while applying slight upward pressure on the Slide Stop.
- If shooter tends to “ride the manual safety” with shooting thumb during shooting, nothing changes. But, since the SFS Manual Safety cannot be “cammed up” with the thumb (only by manually pushing forward the hammer), SFS eliminates the chance of the thumb riding up under the safety and inadvertently engaging the safety.
- Ambidextrous Magazine Catch (Included with Tactical Version)
- Decocking the hammer no longer requires a dangerous maneuver of pulling the trigger and easing the hammer forward.
BHAdvanced Recoil-Buffering Recoil Spring Guide Rod
Enhances Shooter’s Accuracy
Enhances Shooter’s Follow-Up Efficiency (Speed)
Enhances Shooter’s Control of the Hi-Power
Enhances Shooter’s Comfort
Increases Shooter’s Confidence
Extends Hi-Power Service Life
BHAdvanced Elite-Expert 11-Degree Crown 9mm Hi-Power Barrel
Browning OEM .40S&W Barrel
BHAdvanced Trigger Sub-Assembly with BHGold Plated Wide Serrated Trigger BHAdvanced Magazine-Eject-Assist
- Refined geometry repositions the trigger “shoe” in the Hi-Powers’ trigger guard and affords a more straight-back trigger pull and reset motion more characteristic of John Browning’s trigger designs
- Wider Triggers that engages with more surface area of the trigger finger.
- Elimination of the Magazine Disconnect
- Re-design and refinement of the geometry of the Hi-Powers’ Trigger Pawl (lever) minimizes metal-to-metal resistance of the Trigger Pawl’s relationship with the Hi-Powers’ grip frame and optimizes the engagement point with the Hi-Powers’ Sear Connecting Lever (Sear Lever).
- Most Authoritative Hi-Power Trigger Reset Possible
- Eliminates conflict of the Trigger Return Spring with the Trigger Pin (found in all original design Hi-Power triggers
BHAdvanced Magazine-Eject-Assist: Magazines Eject with Authority because of the BH Innovation of the Magazine Eject-Assist-Spring
BH-Tuned 4.5 - 5.0 lbs Trigger Break with excellent authoritative reset
BHAdvanced Convertible Tactical-Ambi-Mag-Catch
Easier to Activate Faster-Mag-Changes
Can be Single-Side or Ambidextrous
Grips Included: (2)
- BHSpringSolutions Heirloom-Grade Walnut Inlays in Aluminum Grip Panels - can be use with or without the BH Expanded Mag Well
- Tactical Carry / Ergonomic Front-Strap Finger Grooved Shooting Grips from RDIH / BHSpringSolutions
New Browning Factory Hi-Power Components:
Extractor
Ejector
Firing Pin
Firing Pin Retaining Plate
All Roll Pins, Solid Pins & Grip Screws Replaced with New from BHSpringSolutions
Mecgar Magazines: (4)
- 2 Blued 10 Round .40S&W Mec-Gar Magazines
- 2 Blued 15 Round 9mm Mec-Gar Magazines
- 1 Mecgar Extended Magazine Baseplate (Makes 15 Round 9mm Magazines 17 Round Capacity or Makes 10 Round .40S&W 11 Round Capacity)
Includes Original Box and Owners Manual
Meprolight Night Sights - Excellent Day & Night Sight Acqisition
Firearm completed BHSpringSolutions Test-Fire Protocol.
SHIPPING NOTES AND FFL Business-Relationship Disclosure:
FFL USPS PRIORITY INSURED SHIPPING: $47.00 (Insured Amount: $4,000.00)
Firearm that is the subject of this listing is in READY-TO-DELIVER Status in The Hi-Power Medic LLC's Inventory.
New Owner of this BHMasterpiece Hi-Power is invited to Schedule an Orientation with a BHSpringSolutions' Representative to Review all functions and maintenance best-practices for this firearm.
SOLD
Handgun Caliber: .40 Smith & Wesson (.40 Auto, 10 x 21 mm)
|
|