to Favorites
1 of 3
2 of 3
3 of 3
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
GLOCK G23C .40 S&W for sale
GLOCK G23C .40 S&W for sale
Click Photo to Enlarge
Guns International #: 103271515
Seller's Inventory #: 568101
Category - Glock Pistols - G23
- .40 S&W Pistols
GLOCK G23C .40 S&W
Description:
Guns Listing ID: 568101
What “23C" means — core differences from a standard G23
The G23C is essentially a Glock 23 with factory compensating/porting features: the slide and barrel have muzzle/port cuts and the barrel is ported near the muzzle.
Those ports redirect some of the high-pressure gas upward (and the slide cuts allow those gases to escape) to reduce muzzle rise and perceived recoil, improving muzzle control and faster follow-up shots with the .40 S&W cartridge.
Mechanically and internally it is otherwise very similar to the standard G23: same frame size, striker-fired Safe Action system, magazines, takedown method, etc.
How the compensation works — practical effects
Ports in the barrel bleed gas upward as the bullet exits; that upward gas flow counters muzzle flip (a downward torque on the muzzle).
Slide cuts give the escaping gas somewhere to go and reduce slide mass forward slightly — combined effects reduce vertical muzzle movement and can speed follow-ups.
Tradeoffs: increased muzzle blast and flash (especially in low light), louder perceived report for bystanders, and more side-blast (not ideal for a partner at your side). Compensated pistols can also be harsher on hearing/eyes if you’re not using appropriate protection.
Compensation performs best with consistent, reasonably stout pressure loads; very-low-pressure loads may not generate enough gas to fully realize the effect.
Typical specifications (representative)
Exact figures vary by generation (Gen 3 / Gen 4 / Gen 5) and specific factory run. The G23C generally shares the G23’s footprint and magazine capacity:
Caliber: .40 S&W
Standard magazine capacity: 13 + 1 (factory) — same magazines as regular G23s for the same generation
Barrel length (approx): ~4.0 in (compact-length; the barrel is the same length as a standard G23 but ported)
Overall length / height / width: essentially the same as a standard G23 for its generation (compact footprint similar to Glock 19 family)
Unloaded weight: very close to a standard G23 — ports and slide cuts change mass minimally; expect the weight to be within a few ounces of non-C models (varies by generation).
Sights: factory three-dot dovetail sights (metal or polymer depending on generation); many owners swap to night or low-profile sights to avoid interference with ports or added sights optics.
Accessory rail: standard Glock rail on the dust cover (same as other G23 variants).
Finish / frame: typical Glock polymer frame with steel slide; slide finish depends on generation (nDLC on later models, older models blued/tenifer).
Manufacturer: GLOCK
Model: G23C
Caliber Info: .40 S&W
Condition: Used - Non-Certified
Barrels: 4" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $349.99
Description:
Guns Listing ID: 568101
What “23C" means — core differences from a standard G23
The G23C is essentially a Glock 23 with factory compensating/porting features: the slide and barrel have muzzle/port cuts and the barrel is ported near the muzzle.
Those ports redirect some of the high-pressure gas upward (and the slide cuts allow those gases to escape) to reduce muzzle rise and perceived recoil, improving muzzle control and faster follow-up shots with the .40 S&W cartridge.
Mechanically and internally it is otherwise very similar to the standard G23: same frame size, striker-fired Safe Action system, magazines, takedown method, etc.
How the compensation works — practical effects
Ports in the barrel bleed gas upward as the bullet exits; that upward gas flow counters muzzle flip (a downward torque on the muzzle).
Slide cuts give the escaping gas somewhere to go and reduce slide mass forward slightly — combined effects reduce vertical muzzle movement and can speed follow-ups.
Tradeoffs: increased muzzle blast and flash (especially in low light), louder perceived report for bystanders, and more side-blast (not ideal for a partner at your side). Compensated pistols can also be harsher on hearing/eyes if you’re not using appropriate protection.
Compensation performs best with consistent, reasonably stout pressure loads; very-low-pressure loads may not generate enough gas to fully realize the effect.
Typical specifications (representative)
Exact figures vary by generation (Gen 3 / Gen 4 / Gen 5) and specific factory run. The G23C generally shares the G23’s footprint and magazine capacity:
Caliber: .40 S&W
Standard magazine capacity: 13 + 1 (factory) — same magazines as regular G23s for the same generation
Barrel length (approx): ~4.0 in (compact-length; the barrel is the same length as a standard G23 but ported)
Overall length / height / width: essentially the same as a standard G23 for its generation (compact footprint similar to Glock 19 family)
Unloaded weight: very close to a standard G23 — ports and slide cuts change mass minimally; expect the weight to be within a few ounces of non-C models (varies by generation).
Sights: factory three-dot dovetail sights (metal or polymer depending on generation); many owners swap to night or low-profile sights to avoid interference with ports or added sights optics.
Accessory rail: standard Glock rail on the dust cover (same as other G23 variants).
Finish / frame: typical Glock polymer frame with steel slide; slide finish depends on generation (nDLC on later models, older models blued/tenifer).
Manufacturer: GLOCK
Model: G23C
Caliber Info: .40 S&W
Condition: Used - Non-Certified
Barrels: 4" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $349.99
Contact Seller
|
Click Photo to Enlarge
|
Guns International #: 103271515
Category - Glock Pistols - G23
- .40 S&W Pistols
GLOCK G23C .40 S&W
Description: Guns Listing ID: 568101 What “23C" means — core differences from a standard G23 The G23C is essentially a Glock 23 with factory compensating/porting features: the slide and barrel have muzzle/port cuts and the barrel is ported near the muzzle. Those ports redirect some of the high-pressure gas upward (and the slide cuts allow those gases to escape) to reduce muzzle rise and perceived recoil, improving muzzle control and faster follow-up shots with the .40 S&W cartridge. Mechanically and internally it is otherwise very similar to the standard G23: same frame size, striker-fired Safe Action system, magazines, takedown method, etc. How the compensation works — practical effects Ports in the barrel bleed gas upward as the bullet exits; that upward gas flow counters muzzle flip (a downward torque on the muzzle). Slide cuts give the escaping gas somewhere to go and reduce slide mass forward slightly — combined effects reduce vertical muzzle movement and can speed follow-ups. Tradeoffs: increased muzzle blast and flash (especially in low light), louder perceived report for bystanders, and more side-blast (not ideal for a partner at your side). Compensated pistols can also be harsher on hearing/eyes if you’re not using appropriate protection. Compensation performs best with consistent, reasonably stout pressure loads; very-low-pressure loads may not generate enough gas to fully realize the effect. Typical specifications (representative) Exact figures vary by generation (Gen 3 / Gen 4 / Gen 5) and specific factory run. The G23C generally shares the G23’s footprint and magazine capacity: Caliber: .40 S&W Standard magazine capacity: 13 + 1 (factory) — same magazines as regular G23s for the same generation Barrel length (approx): ~4.0 in (compact-length; the barrel is the same length as a standard G23 but ported) Overall length / height / width: essentially the same as a standard G23 for its generation (compact footprint similar to Glock 19 family) Unloaded weight: very close to a standard G23 — ports and slide cuts change mass minimally; expect the weight to be within a few ounces of non-C models (varies by generation). Sights: factory three-dot dovetail sights (metal or polymer depending on generation); many owners swap to night or low-profile sights to avoid interference with ports or added sights optics. Accessory rail: standard Glock rail on the dust cover (same as other G23 variants). Finish / frame: typical Glock polymer frame with steel slide; slide finish depends on generation (nDLC on later models, older models blued/tenifer). Manufacturer: GLOCK Model: G23C Caliber Info: .40 S&W Condition: Used - Non-Certified Barrels: 4" BARREL Action: SEMI AUTOMATIC Finish: black Price: $349.99 Contact Seller |
Click Photo to Enlarge
Guns International #: 103271515
Seller's Inventory #: 568101
Category - Glock Pistols - G23
- .40 S&W Pistols
GLOCK G23C .40 S&W
Description:
Guns Listing ID: 568101
What “23C" means — core differences from a standard G23
The G23C is essentially a Glock 23 with factory compensating/porting features: the slide and barrel have muzzle/port cuts and the barrel is ported near the muzzle.
Those ports redirect some of the high-pressure gas upward (and the slide cuts allow those gases to escape) to reduce muzzle rise and perceived recoil, improving muzzle control and faster follow-up shots with the .40 S&W cartridge.
Mechanically and internally it is otherwise very similar to the standard G23: same frame size, striker-fired Safe Action system, magazines, takedown method, etc.
How the compensation works — practical effects
Ports in the barrel bleed gas upward as the bullet exits; that upward gas flow counters muzzle flip (a downward torque on the muzzle).
Slide cuts give the escaping gas somewhere to go and reduce slide mass forward slightly — combined effects reduce vertical muzzle movement and can speed follow-ups.
Tradeoffs: increased muzzle blast and flash (especially in low light), louder perceived report for bystanders, and more side-blast (not ideal for a partner at your side). Compensated pistols can also be harsher on hearing/eyes if you’re not using appropriate protection.
Compensation performs best with consistent, reasonably stout pressure loads; very-low-pressure loads may not generate enough gas to fully realize the effect.
Typical specifications (representative)
Exact figures vary by generation (Gen 3 / Gen 4 / Gen 5) and specific factory run. The G23C generally shares the G23’s footprint and magazine capacity:
Caliber: .40 S&W
Standard magazine capacity: 13 + 1 (factory) — same magazines as regular G23s for the same generation
Barrel length (approx): ~4.0 in (compact-length; the barrel is the same length as a standard G23 but ported)
Overall length / height / width: essentially the same as a standard G23 for its generation (compact footprint similar to Glock 19 family)
Unloaded weight: very close to a standard G23 — ports and slide cuts change mass minimally; expect the weight to be within a few ounces of non-C models (varies by generation).
Sights: factory three-dot dovetail sights (metal or polymer depending on generation); many owners swap to night or low-profile sights to avoid interference with ports or added sights optics.
Accessory rail: standard Glock rail on the dust cover (same as other G23 variants).
Finish / frame: typical Glock polymer frame with steel slide; slide finish depends on generation (nDLC on later models, older models blued/tenifer).
Manufacturer: GLOCK
Model: G23C
Caliber Info: .40 S&W
Condition: Used - Non-Certified
Barrels: 4" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $349.99
Description:
Guns Listing ID: 568101
What “23C" means — core differences from a standard G23
The G23C is essentially a Glock 23 with factory compensating/porting features: the slide and barrel have muzzle/port cuts and the barrel is ported near the muzzle.
Those ports redirect some of the high-pressure gas upward (and the slide cuts allow those gases to escape) to reduce muzzle rise and perceived recoil, improving muzzle control and faster follow-up shots with the .40 S&W cartridge.
Mechanically and internally it is otherwise very similar to the standard G23: same frame size, striker-fired Safe Action system, magazines, takedown method, etc.
How the compensation works — practical effects
Ports in the barrel bleed gas upward as the bullet exits; that upward gas flow counters muzzle flip (a downward torque on the muzzle).
Slide cuts give the escaping gas somewhere to go and reduce slide mass forward slightly — combined effects reduce vertical muzzle movement and can speed follow-ups.
Tradeoffs: increased muzzle blast and flash (especially in low light), louder perceived report for bystanders, and more side-blast (not ideal for a partner at your side). Compensated pistols can also be harsher on hearing/eyes if you’re not using appropriate protection.
Compensation performs best with consistent, reasonably stout pressure loads; very-low-pressure loads may not generate enough gas to fully realize the effect.
Typical specifications (representative)
Exact figures vary by generation (Gen 3 / Gen 4 / Gen 5) and specific factory run. The G23C generally shares the G23’s footprint and magazine capacity:
Caliber: .40 S&W
Standard magazine capacity: 13 + 1 (factory) — same magazines as regular G23s for the same generation
Barrel length (approx): ~4.0 in (compact-length; the barrel is the same length as a standard G23 but ported)
Overall length / height / width: essentially the same as a standard G23 for its generation (compact footprint similar to Glock 19 family)
Unloaded weight: very close to a standard G23 — ports and slide cuts change mass minimally; expect the weight to be within a few ounces of non-C models (varies by generation).
Sights: factory three-dot dovetail sights (metal or polymer depending on generation); many owners swap to night or low-profile sights to avoid interference with ports or added sights optics.
Accessory rail: standard Glock rail on the dust cover (same as other G23 variants).
Finish / frame: typical Glock polymer frame with steel slide; slide finish depends on generation (nDLC on later models, older models blued/tenifer).
Manufacturer: GLOCK
Model: G23C
Caliber Info: .40 S&W
Condition: Used - Non-Certified
Barrels: 4" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $349.99
Guns International #: 103271515
Seller's Inventory #: 568101
Guns International #: 103271515
Seller's Inventory #: 568101
Category - Glock Pistols - G23
- .40 S&W Pistols
GLOCK G23C .40 S&W
Description:
Guns Listing ID: 568101
What “23C" means — core differences from a standard G23
The G23C is essentially a Glock 23 with factory compensating/porting features: the slide and barrel have muzzle/port cuts and the barrel is ported near the muzzle.
Those ports redirect some of the high-pressure gas upward (and the slide cuts allow those gases to escape) to reduce muzzle rise and perceived recoil, improving muzzle control and faster follow-up shots with the .40 S&W cartridge.
Mechanically and internally it is otherwise very similar to the standard G23: same frame size, striker-fired Safe Action system, magazines, takedown method, etc.
How the compensation works — practical effects
Ports in the barrel bleed gas upward as the bullet exits; that upward gas flow counters muzzle flip (a downward torque on the muzzle).
Slide cuts give the escaping gas somewhere to go and reduce slide mass forward slightly — combined effects reduce vertical muzzle movement and can speed follow-ups.
Tradeoffs: increased muzzle blast and flash (especially in low light), louder perceived report for bystanders, and more side-blast (not ideal for a partner at your side). Compensated pistols can also be harsher on hearing/eyes if you’re not using appropriate protection.
Compensation performs best with consistent, reasonably stout pressure loads; very-low-pressure loads may not generate enough gas to fully realize the effect.
Typical specifications (representative)
Exact figures vary by generation (Gen 3 / Gen 4 / Gen 5) and specific factory run. The G23C generally shares the G23’s footprint and magazine capacity:
Caliber: .40 S&W
Standard magazine capacity: 13 + 1 (factory) — same magazines as regular G23s for the same generation
Barrel length (approx): ~4.0 in (compact-length; the barrel is the same length as a standard G23 but ported)
Overall length / height / width: essentially the same as a standard G23 for its generation (compact footprint similar to Glock 19 family)
Unloaded weight: very close to a standard G23 — ports and slide cuts change mass minimally; expect the weight to be within a few ounces of non-C models (varies by generation).
Sights: factory three-dot dovetail sights (metal or polymer depending on generation); many owners swap to night or low-profile sights to avoid interference with ports or added sights optics.
Accessory rail: standard Glock rail on the dust cover (same as other G23 variants).
Finish / frame: typical Glock polymer frame with steel slide; slide finish depends on generation (nDLC on later models, older models blued/tenifer).
Manufacturer: GLOCK
Model: G23C
Caliber Info: .40 S&W
Condition: Used - Non-Certified
Barrels: 4" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $349.99
Description:
Guns Listing ID: 568101
What “23C" means — core differences from a standard G23
The G23C is essentially a Glock 23 with factory compensating/porting features: the slide and barrel have muzzle/port cuts and the barrel is ported near the muzzle.
Those ports redirect some of the high-pressure gas upward (and the slide cuts allow those gases to escape) to reduce muzzle rise and perceived recoil, improving muzzle control and faster follow-up shots with the .40 S&W cartridge.
Mechanically and internally it is otherwise very similar to the standard G23: same frame size, striker-fired Safe Action system, magazines, takedown method, etc.
How the compensation works — practical effects
Ports in the barrel bleed gas upward as the bullet exits; that upward gas flow counters muzzle flip (a downward torque on the muzzle).
Slide cuts give the escaping gas somewhere to go and reduce slide mass forward slightly — combined effects reduce vertical muzzle movement and can speed follow-ups.
Tradeoffs: increased muzzle blast and flash (especially in low light), louder perceived report for bystanders, and more side-blast (not ideal for a partner at your side). Compensated pistols can also be harsher on hearing/eyes if you’re not using appropriate protection.
Compensation performs best with consistent, reasonably stout pressure loads; very-low-pressure loads may not generate enough gas to fully realize the effect.
Typical specifications (representative)
Exact figures vary by generation (Gen 3 / Gen 4 / Gen 5) and specific factory run. The G23C generally shares the G23’s footprint and magazine capacity:
Caliber: .40 S&W
Standard magazine capacity: 13 + 1 (factory) — same magazines as regular G23s for the same generation
Barrel length (approx): ~4.0 in (compact-length; the barrel is the same length as a standard G23 but ported)
Overall length / height / width: essentially the same as a standard G23 for its generation (compact footprint similar to Glock 19 family)
Unloaded weight: very close to a standard G23 — ports and slide cuts change mass minimally; expect the weight to be within a few ounces of non-C models (varies by generation).
Sights: factory three-dot dovetail sights (metal or polymer depending on generation); many owners swap to night or low-profile sights to avoid interference with ports or added sights optics.
Accessory rail: standard Glock rail on the dust cover (same as other G23 variants).
Finish / frame: typical Glock polymer frame with steel slide; slide finish depends on generation (nDLC on later models, older models blued/tenifer).
Manufacturer: GLOCK
Model: G23C
Caliber Info: .40 S&W
Condition: Used - Non-Certified
Barrels: 4" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $349.99
Contact Seller
Buy Now
Pay with GunTab
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3