to Favorites
1 of 3
2 of 3
3 of 3
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
TAURUS G2C 40 W MCK Conversion Kit .40 CALIBER for sale
TAURUS G2C 40 W MCK Conversion Kit .40 CALIBER for sale
Click Photo to Enlarge
Guns International #: 103347001
Seller's Inventory #: 588859
Category - Taurus Pistols
- Tactical Pistols
TAURUS G2C 40 W MCK Conversion Kit
.40 CALIBER
Description:
Guns Listing ID: 588859
Taurus G2C .40 — compact Taurus polymer-frame semi-auto (often sold as PT111 G2C variants; confirm model/caliber marking on your gun).
MCK conversion kit — likely the CAA MCK-style chassis that converts a pistol into a carbine-style platform by enclosing the pistol in a polymer chassis/stock with a fore-end, longer sighting plane, and accessory rails. Kits are model-specific — the pistol must fit the chassis without permanent modification.
Exact model fit — the kit must list compatibility with Taurus G2C and specifically the .40 S&W variant if there’s any dimensional difference between calibers.
Slide / barrel clearance — ensure the slide and barrel length/profile of the G2C fit inside the chassis without binding.
Magazine fit & feeding — confirm magazines (stock mags or extended) seat and release properly in the chassis. Some kits require different floorplate geometry.
Sights/optic clearance — will factory iron sights line up through the chassis window, or does the kit require using optics?
Intended use & materials — higher-recoil calibers (like .40) produce a stronger impulse — verify the kit is rated for .40 and built to handle the recoil/locking force.
Adding a shoulder stock to a pistol can create an NFA short-barreled rifle (SBR) in the United States if the result is a firearm designed to be fired from the shoulder; that can require an NFA tax stamp.
Stabilizing braces have complicated guidance; rules changed over the years — do not assume braces remove legal issues.
Different countries and states have different restrictions on pistol-to-carbine conversion devices. Check local, state, and federal law or consult a qualified attorney or licensed dealer before buying/using. I can’t give legal advice but I strongly recommend confirming legality before modifying/using.
Use only the manufacturer’s recommended installation method — most MCK-type kits allow the pistol to seat into the chassis and lock without gunsmithing.
Verify function after installation: clear the weapon, cycle the slide, check magazine release, trigger reset, and perform a live-fire function test at a range (start with a few rounds).
If the kit requires modifications (drilling, cutting) to the pistol itself, stop and seek a gunsmith — that could affect safety, warranty, and legality.
Keep original parts (frame/serial) intact; the chassis should be an accessory that doesn’t obscure the firearm’s serial number.
(1)MCK FDE Conversion Kit W (Green) Laser Light Combo
(1)Taurus 12 Rnd Mag
(1)Taurus 40 Cal G2C
Manufacturer: TAURUS
Model: G2C 40 W MCK Conversion Kit
Caliber Info: .40 CALIBER
Condition: Used - Non-Certified
Barrels: 3.2" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $499.99
Description:
Guns Listing ID: 588859
Taurus G2C .40 — compact Taurus polymer-frame semi-auto (often sold as PT111 G2C variants; confirm model/caliber marking on your gun).
MCK conversion kit — likely the CAA MCK-style chassis that converts a pistol into a carbine-style platform by enclosing the pistol in a polymer chassis/stock with a fore-end, longer sighting plane, and accessory rails. Kits are model-specific — the pistol must fit the chassis without permanent modification.
Exact model fit — the kit must list compatibility with Taurus G2C and specifically the .40 S&W variant if there’s any dimensional difference between calibers.
Slide / barrel clearance — ensure the slide and barrel length/profile of the G2C fit inside the chassis without binding.
Magazine fit & feeding — confirm magazines (stock mags or extended) seat and release properly in the chassis. Some kits require different floorplate geometry.
Sights/optic clearance — will factory iron sights line up through the chassis window, or does the kit require using optics?
Intended use & materials — higher-recoil calibers (like .40) produce a stronger impulse — verify the kit is rated for .40 and built to handle the recoil/locking force.
Adding a shoulder stock to a pistol can create an NFA short-barreled rifle (SBR) in the United States if the result is a firearm designed to be fired from the shoulder; that can require an NFA tax stamp.
Stabilizing braces have complicated guidance; rules changed over the years — do not assume braces remove legal issues.
Different countries and states have different restrictions on pistol-to-carbine conversion devices. Check local, state, and federal law or consult a qualified attorney or licensed dealer before buying/using. I can’t give legal advice but I strongly recommend confirming legality before modifying/using.
Use only the manufacturer’s recommended installation method — most MCK-type kits allow the pistol to seat into the chassis and lock without gunsmithing.
Verify function after installation: clear the weapon, cycle the slide, check magazine release, trigger reset, and perform a live-fire function test at a range (start with a few rounds).
If the kit requires modifications (drilling, cutting) to the pistol itself, stop and seek a gunsmith — that could affect safety, warranty, and legality.
Keep original parts (frame/serial) intact; the chassis should be an accessory that doesn’t obscure the firearm’s serial number.
(1)MCK FDE Conversion Kit W (Green) Laser Light Combo
(1)Taurus 12 Rnd Mag
(1)Taurus 40 Cal G2C
Manufacturer: TAURUS
Model: G2C 40 W MCK Conversion Kit
Caliber Info: .40 CALIBER
Condition: Used - Non-Certified
Barrels: 3.2" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $499.99
Contact Seller
|
Click Photo to Enlarge
|
Guns International #: 103347001
Category - Taurus Pistols
- Tactical Pistols
TAURUS G2C 40 W MCK Conversion Kit
.40 CALIBER
Description: Guns Listing ID: 588859 Taurus G2C .40 — compact Taurus polymer-frame semi-auto (often sold as PT111 G2C variants; confirm model/caliber marking on your gun). MCK conversion kit — likely the CAA MCK-style chassis that converts a pistol into a carbine-style platform by enclosing the pistol in a polymer chassis/stock with a fore-end, longer sighting plane, and accessory rails. Kits are model-specific — the pistol must fit the chassis without permanent modification. Exact model fit — the kit must list compatibility with Taurus G2C and specifically the .40 S&W variant if there’s any dimensional difference between calibers. Slide / barrel clearance — ensure the slide and barrel length/profile of the G2C fit inside the chassis without binding. Magazine fit & feeding — confirm magazines (stock mags or extended) seat and release properly in the chassis. Some kits require different floorplate geometry. Sights/optic clearance — will factory iron sights line up through the chassis window, or does the kit require using optics? Intended use & materials — higher-recoil calibers (like .40) produce a stronger impulse — verify the kit is rated for .40 and built to handle the recoil/locking force. Adding a shoulder stock to a pistol can create an NFA short-barreled rifle (SBR) in the United States if the result is a firearm designed to be fired from the shoulder; that can require an NFA tax stamp. Stabilizing braces have complicated guidance; rules changed over the years — do not assume braces remove legal issues. Different countries and states have different restrictions on pistol-to-carbine conversion devices. Check local, state, and federal law or consult a qualified attorney or licensed dealer before buying/using. I can’t give legal advice but I strongly recommend confirming legality before modifying/using. Use only the manufacturer’s recommended installation method — most MCK-type kits allow the pistol to seat into the chassis and lock without gunsmithing. Verify function after installation: clear the weapon, cycle the slide, check magazine release, trigger reset, and perform a live-fire function test at a range (start with a few rounds). If the kit requires modifications (drilling, cutting) to the pistol itself, stop and seek a gunsmith — that could affect safety, warranty, and legality. Keep original parts (frame/serial) intact; the chassis should be an accessory that doesn’t obscure the firearm’s serial number. (1)MCK FDE Conversion Kit W (Green) Laser Light Combo (1)Taurus 12 Rnd Mag (1)Taurus 40 Cal G2C Manufacturer: TAURUS Model: G2C 40 W MCK Conversion Kit Caliber Info: .40 CALIBER Condition: Used - Non-Certified Barrels: 3.2" BARREL Action: SEMI AUTOMATIC Finish: black Price: $499.99 Contact Seller |
Click Photo to Enlarge
Guns International #: 103347001
Seller's Inventory #: 588859
Category - Taurus Pistols
- Tactical Pistols
TAURUS G2C 40 W MCK Conversion Kit
.40 CALIBER
Description:
Guns Listing ID: 588859
Taurus G2C .40 — compact Taurus polymer-frame semi-auto (often sold as PT111 G2C variants; confirm model/caliber marking on your gun).
MCK conversion kit — likely the CAA MCK-style chassis that converts a pistol into a carbine-style platform by enclosing the pistol in a polymer chassis/stock with a fore-end, longer sighting plane, and accessory rails. Kits are model-specific — the pistol must fit the chassis without permanent modification.
Exact model fit — the kit must list compatibility with Taurus G2C and specifically the .40 S&W variant if there’s any dimensional difference between calibers.
Slide / barrel clearance — ensure the slide and barrel length/profile of the G2C fit inside the chassis without binding.
Magazine fit & feeding — confirm magazines (stock mags or extended) seat and release properly in the chassis. Some kits require different floorplate geometry.
Sights/optic clearance — will factory iron sights line up through the chassis window, or does the kit require using optics?
Intended use & materials — higher-recoil calibers (like .40) produce a stronger impulse — verify the kit is rated for .40 and built to handle the recoil/locking force.
Adding a shoulder stock to a pistol can create an NFA short-barreled rifle (SBR) in the United States if the result is a firearm designed to be fired from the shoulder; that can require an NFA tax stamp.
Stabilizing braces have complicated guidance; rules changed over the years — do not assume braces remove legal issues.
Different countries and states have different restrictions on pistol-to-carbine conversion devices. Check local, state, and federal law or consult a qualified attorney or licensed dealer before buying/using. I can’t give legal advice but I strongly recommend confirming legality before modifying/using.
Use only the manufacturer’s recommended installation method — most MCK-type kits allow the pistol to seat into the chassis and lock without gunsmithing.
Verify function after installation: clear the weapon, cycle the slide, check magazine release, trigger reset, and perform a live-fire function test at a range (start with a few rounds).
If the kit requires modifications (drilling, cutting) to the pistol itself, stop and seek a gunsmith — that could affect safety, warranty, and legality.
Keep original parts (frame/serial) intact; the chassis should be an accessory that doesn’t obscure the firearm’s serial number.
(1)MCK FDE Conversion Kit W (Green) Laser Light Combo
(1)Taurus 12 Rnd Mag
(1)Taurus 40 Cal G2C
Manufacturer: TAURUS
Model: G2C 40 W MCK Conversion Kit
Caliber Info: .40 CALIBER
Condition: Used - Non-Certified
Barrels: 3.2" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $499.99
Description:
Guns Listing ID: 588859
Taurus G2C .40 — compact Taurus polymer-frame semi-auto (often sold as PT111 G2C variants; confirm model/caliber marking on your gun).
MCK conversion kit — likely the CAA MCK-style chassis that converts a pistol into a carbine-style platform by enclosing the pistol in a polymer chassis/stock with a fore-end, longer sighting plane, and accessory rails. Kits are model-specific — the pistol must fit the chassis without permanent modification.
Exact model fit — the kit must list compatibility with Taurus G2C and specifically the .40 S&W variant if there’s any dimensional difference between calibers.
Slide / barrel clearance — ensure the slide and barrel length/profile of the G2C fit inside the chassis without binding.
Magazine fit & feeding — confirm magazines (stock mags or extended) seat and release properly in the chassis. Some kits require different floorplate geometry.
Sights/optic clearance — will factory iron sights line up through the chassis window, or does the kit require using optics?
Intended use & materials — higher-recoil calibers (like .40) produce a stronger impulse — verify the kit is rated for .40 and built to handle the recoil/locking force.
Adding a shoulder stock to a pistol can create an NFA short-barreled rifle (SBR) in the United States if the result is a firearm designed to be fired from the shoulder; that can require an NFA tax stamp.
Stabilizing braces have complicated guidance; rules changed over the years — do not assume braces remove legal issues.
Different countries and states have different restrictions on pistol-to-carbine conversion devices. Check local, state, and federal law or consult a qualified attorney or licensed dealer before buying/using. I can’t give legal advice but I strongly recommend confirming legality before modifying/using.
Use only the manufacturer’s recommended installation method — most MCK-type kits allow the pistol to seat into the chassis and lock without gunsmithing.
Verify function after installation: clear the weapon, cycle the slide, check magazine release, trigger reset, and perform a live-fire function test at a range (start with a few rounds).
If the kit requires modifications (drilling, cutting) to the pistol itself, stop and seek a gunsmith — that could affect safety, warranty, and legality.
Keep original parts (frame/serial) intact; the chassis should be an accessory that doesn’t obscure the firearm’s serial number.
(1)MCK FDE Conversion Kit W (Green) Laser Light Combo
(1)Taurus 12 Rnd Mag
(1)Taurus 40 Cal G2C
Manufacturer: TAURUS
Model: G2C 40 W MCK Conversion Kit
Caliber Info: .40 CALIBER
Condition: Used - Non-Certified
Barrels: 3.2" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $499.99
Guns International #: 103347001
Seller's Inventory #: 588859
Guns International #: 103347001
Seller's Inventory #: 588859
Category - Taurus Pistols
- Tactical Pistols
TAURUS G2C 40 W MCK Conversion Kit
.40 CALIBER
Description:
Guns Listing ID: 588859
Taurus G2C .40 — compact Taurus polymer-frame semi-auto (often sold as PT111 G2C variants; confirm model/caliber marking on your gun).
MCK conversion kit — likely the CAA MCK-style chassis that converts a pistol into a carbine-style platform by enclosing the pistol in a polymer chassis/stock with a fore-end, longer sighting plane, and accessory rails. Kits are model-specific — the pistol must fit the chassis without permanent modification.
Exact model fit — the kit must list compatibility with Taurus G2C and specifically the .40 S&W variant if there’s any dimensional difference between calibers.
Slide / barrel clearance — ensure the slide and barrel length/profile of the G2C fit inside the chassis without binding.
Magazine fit & feeding — confirm magazines (stock mags or extended) seat and release properly in the chassis. Some kits require different floorplate geometry.
Sights/optic clearance — will factory iron sights line up through the chassis window, or does the kit require using optics?
Intended use & materials — higher-recoil calibers (like .40) produce a stronger impulse — verify the kit is rated for .40 and built to handle the recoil/locking force.
Adding a shoulder stock to a pistol can create an NFA short-barreled rifle (SBR) in the United States if the result is a firearm designed to be fired from the shoulder; that can require an NFA tax stamp.
Stabilizing braces have complicated guidance; rules changed over the years — do not assume braces remove legal issues.
Different countries and states have different restrictions on pistol-to-carbine conversion devices. Check local, state, and federal law or consult a qualified attorney or licensed dealer before buying/using. I can’t give legal advice but I strongly recommend confirming legality before modifying/using.
Use only the manufacturer’s recommended installation method — most MCK-type kits allow the pistol to seat into the chassis and lock without gunsmithing.
Verify function after installation: clear the weapon, cycle the slide, check magazine release, trigger reset, and perform a live-fire function test at a range (start with a few rounds).
If the kit requires modifications (drilling, cutting) to the pistol itself, stop and seek a gunsmith — that could affect safety, warranty, and legality.
Keep original parts (frame/serial) intact; the chassis should be an accessory that doesn’t obscure the firearm’s serial number.
(1)MCK FDE Conversion Kit W (Green) Laser Light Combo
(1)Taurus 12 Rnd Mag
(1)Taurus 40 Cal G2C
Manufacturer: TAURUS
Model: G2C 40 W MCK Conversion Kit
Caliber Info: .40 CALIBER
Condition: Used - Non-Certified
Barrels: 3.2" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $499.99
Description:
Guns Listing ID: 588859
Taurus G2C .40 — compact Taurus polymer-frame semi-auto (often sold as PT111 G2C variants; confirm model/caliber marking on your gun).
MCK conversion kit — likely the CAA MCK-style chassis that converts a pistol into a carbine-style platform by enclosing the pistol in a polymer chassis/stock with a fore-end, longer sighting plane, and accessory rails. Kits are model-specific — the pistol must fit the chassis without permanent modification.
Exact model fit — the kit must list compatibility with Taurus G2C and specifically the .40 S&W variant if there’s any dimensional difference between calibers.
Slide / barrel clearance — ensure the slide and barrel length/profile of the G2C fit inside the chassis without binding.
Magazine fit & feeding — confirm magazines (stock mags or extended) seat and release properly in the chassis. Some kits require different floorplate geometry.
Sights/optic clearance — will factory iron sights line up through the chassis window, or does the kit require using optics?
Intended use & materials — higher-recoil calibers (like .40) produce a stronger impulse — verify the kit is rated for .40 and built to handle the recoil/locking force.
Adding a shoulder stock to a pistol can create an NFA short-barreled rifle (SBR) in the United States if the result is a firearm designed to be fired from the shoulder; that can require an NFA tax stamp.
Stabilizing braces have complicated guidance; rules changed over the years — do not assume braces remove legal issues.
Different countries and states have different restrictions on pistol-to-carbine conversion devices. Check local, state, and federal law or consult a qualified attorney or licensed dealer before buying/using. I can’t give legal advice but I strongly recommend confirming legality before modifying/using.
Use only the manufacturer’s recommended installation method — most MCK-type kits allow the pistol to seat into the chassis and lock without gunsmithing.
Verify function after installation: clear the weapon, cycle the slide, check magazine release, trigger reset, and perform a live-fire function test at a range (start with a few rounds).
If the kit requires modifications (drilling, cutting) to the pistol itself, stop and seek a gunsmith — that could affect safety, warranty, and legality.
Keep original parts (frame/serial) intact; the chassis should be an accessory that doesn’t obscure the firearm’s serial number.
(1)MCK FDE Conversion Kit W (Green) Laser Light Combo
(1)Taurus 12 Rnd Mag
(1)Taurus 40 Cal G2C
Manufacturer: TAURUS
Model: G2C 40 W MCK Conversion Kit
Caliber Info: .40 CALIBER
Condition: Used - Non-Certified
Barrels: 3.2" BARREL
Action: SEMI AUTOMATIC
Finish: black
Price: $499.99
Contact Seller
Buy Now
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3