Perazzi MX8 12 gauge. 28 3/8" Long. Barrels only. sixteen choke tubes. Full set of skeet sub gauge .410, 28 and 20ga.
Guns International #: 100642686 Seller's Inventory #:
Category: Perazzi Shotguns -

Seller's Information
When emailing or calling sellers direct, please mention that you saw their listing on GunsInternational.com
Verified Seller
Seller: Jim Veta
Company:
Member Since: 12/6/10
State: Nevada
Country: United States
Phone: (310) 291-1784
Number of Active Listings: 0
Total Number of Listings: 222
Seller: Private Seller
Return Policy: 3 day inspection and return policy on used guns.
3 days
Payment Types Accepted: money order, cashiers check



Description:
The Kolar tubes have sold!!! Barrel only. 12ga. MX8 square mono block, type four, 28 3/8" length, serial number is shown in Pictures 82xxx range. This is not a carrier barrel! 16 choke tubes. 11 Generation 2, original, Perazzi chokes. 2-0's(cylinder),
1-#1 .004 (skeet). 2-#2's .008(I.C.), 2-#4's .016(lt. Mod.) 2-#6"s .024(I.M.) 1-#8 .032(full) 1-#10 .040(x-full). Also: 5 Wright choke tubes in the following: 2-#1's(.004) skeet, 1-#3 .012(I.C.), 2-#4's .016(lt.mod.)
This is a flat, 11x11mm paralell rib. It had a Hi-viz system that was removed and a typical bead was installed. It is an easy fix to re-install the hi-Viz and get rid of the gap you see. The bore is 18.4(.725). The forcing cones have been lengthened. Both barrels are ported. There is a white front bead and a smaller metal mid-bead. No galling. these barrels will fit any Perazzi MX8 style square mono-block accepting receiver. It will not fit on any MX3, MX5, MX6 or MX7. It will fit on MX3 special, MX8, MX8 special, MX2000, MX11 and a few more. Split barrels with no side ribs. The barrel weight is stamped 1.5kg, however it really weighs a bit less at 1.47Kg(3lb's 3.8OZ's). I would rate the bluing at 98%. Perfect for Skeet, Sporting clays and live box birds. They will snap on the receiver but may require some final fitting by a competent gunsmith. My return policy is three day non-shooting inspection. I will not accept a return unless I have mis-represented or not disclosed info. on the the barrels either through print or Picture. Returning the barrels because they may require fitting is not an acceptable reason.

SOLD