 |
 |
 |
 |
 |
 |
 |
Remington 11-48 28Ga
Guns International #: 101134778 Seller's Inventory #:
Category: Remington Shotguns - Semi-Auto - Shotguns - 28 Gauge
Seller's Information
When emailing or calling sellers direct, please mention that you saw their listing on GunsInternational.com
Seller: Caliber Sports
Member Since: 12/29/16
First Name: DREW
Last Name: BURKE
State: Alabama
Zip: 35209
Country: United States
Phone: (205) 917-5800
Fax: (205) 917-5750
Number of Active Listings: 0
Total Number of Listings: 2857
Seller: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns.
Insurance can be provided for an additional fee and is the customers responsibility. Shipping of long guns start at $25 and all pistols start at $50 (2 day air). West of the Mississippi will be additional cost on all shipping charges.
Payment Types Accepted: All Major Credit Cards, Certified Check or Money Order,
Description:
The 11-48 is a long-recoil operated semi-automatic shotgun based on the Remington Model 11. Shells are stored in a tubular magazine under the barrel. When a chambered shell is fired, the barrel and bolt recoiling together (for a distance greater than the shell length) re-cock the hammer, eject the spent shell, and feed another shell from the magazine into the action. The 11-48 was revolutionary in that it ushered in stamped steel components for a lower cost of assembly, and featured truly interchangeable parts not requiring fitting by a gunsmith, and it was reliable in the extreme. The impact of these changes can be seen on every Remington shotgun since, and is also prevalent on competitor's models. The 11-48 differs from the Model 11 in the shape of its machined steel receiver and the use of less expensive stamped steel internal parts. The new easily removable aluminum trigger housing was to be featured on its successors, the 1100 and the 11-87. Like the Model 11, the gun operated by way of two return springs. The first, located in the buttstock, serves as the resistance to the bolt. The second spring, located over the magazine tube, serves as the barrel recoil spring, allowing the barrel to recoil several inches into the receiver. The 11-48 differs from the Model 11 in the friction ring placed at the forward end of the barrel recoil spring. The Model 11 had a brass friction ring with one blunt end and one beveled end. The ring fit into a corresponding cut in the barrel underlug. For heavy loads, the ring was turned with the beveled end facing the lug. For lighter loads, the blunt end was turned to face the lug. The 11-48 features a similar friction ring system but is modified to be self-adjusting so as to work with all loads.
SOLD
Manufacturer: Remington
Model: 11-48
Condition: Used
Wood Condition: Good
Gauge Info: 28Ga