 |
 |
 |
 |
 |
Forster .375 RUM Ultra Micrometer Seater FL 2 die set
Guns International #: 101630316 Seller's Inventory #:
Category: Reloading Equipment and Tools - Reloading Dies - Reloading Equipment and Tools - American
Seller's Information
When emailing or calling sellers direct, please mention that you saw their listing on GunsInternational.com
Seller: Kambako
Member Since: 6/29/17
State: Washington
Country: United States
Phone: (425) 644-8130
Seller: Private Seller
Return Policy: 3 day inspection and return policy on used guns.
If returned buyer pays return shipping.
Payment Types Accepted: Money Order, Cashier's Check,
About Us: I am a Endowment Life member of the NRA and have been selling for 45 years.
Description:
The Forster Ultra Micrometer Seater Die includes all the popular features of the Bench Rest Seater Die, plus an ultra-accurate micrometer adjustment feature for adjusting bullet seating depth. Seating depth may be adjusted in .001" or even .0005" increments. The hash marks on the dial are great for dialing in the desired seating depth and non-crimping allows the bullet and case to be held in perfect alignment during seating. Also, a spring loaded sliding sleeve ,shown at the bottom of the die, holds the case concentric with the seating sleeve for greater concentricity. Notes: After the bullet has been seated close to the desired depth take a measurement. Adjust the micrometer stem down to the desired depth and the cartridge will be exactly the desired length needed. If using Forster Dies in a Forster Co-Ax press shellholders are not required since Forster presses do not require a shellholder. If using Forster Dies in any non-Forster press use shellholders that are recommended by the press manufacturer of the press being used. Non-crimping seating die allows the bullet and case to be held in perfect alignment during seating. The FL sizing die has the expander button near the top of the die instead of near the bottom as in conventional dies. This allows the expander button to contact the inside of the neck while most of the case is still in the die, resulting in greater concentricity of the neck.
SOLD