 |
 |
 |
AR15 AR-15 Improved Ejector for .300 BLK .350 Legend/.450 BUSHMASTER! Prevents Stovepipes/JAMS when feeding from the magazine
Guns International #: 101856132 Seller's Inventory #:
Category: Gun Parts - AR-15 Upper - Gun Parts - Rifle
Seller's Information
When emailing or calling sellers direct, please mention that you saw their listing on GunsInternational.com
Seller: DAVIS FIREARMS REPAIR & RESTORATION
Member Since: 2/13/22
State: Georgia
Zip: 30540
Country: United States
Phone: (706) 889-2965
Number of Active Listings: 0
Total Number of Listings: 1
Seller: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns.
Payment Types Accepted: Check/Money Order
About Us: Problem Solvers of .350 Legend & .450 BUSHMASTER Feed Issues For All AR Platforms
Description:
Improved Ejector for AR-15 Recommended for reliable feed & function with straight wall cartridges & ALL center fire Calibers bigger than .223/5.56 PATENT PENDING MADE IN U.S.A. The Patented technologies of both DF-107 & DF-207 Ejectors include Two Contact/Engagement Surfaces on slightly diffrent angles, As a cartridge is "fed" from the magazine, The combination of placement and Degree of Angle on the "Inner" and "Outer" Contact/Engagement Surfaces allows for MAXIMUM Clearance at the base of the cartridge, Allowing the cartridge to find the "Center-Line" of the "Bolt Face" during the chambering process which is a "must have" for Chamberings offered in the AR-15 platform, Such as, .300 .350 .450 just to name a few which have less "Feed Tolerance/Clearance". Resulting in more Reliabilty with fewer "stovepipes" ,"JAMS" & malfunctions, Saving ammo, Time, Frustration, And so much more that could be costly. Guarenteed positive feed improvement resulting in less "Bolt-Lag" (time to fully seat into battery while feeding a cartridge into the chamber", As the cartridge is Extracted from the chamber, The case mouth clears the Ejection Port, The Ejection process is started, As the DF-107/DF-207 Ejector moves forward pushing on the spent casing, The location and "Degree of Angle" of the Two Contact/Engagement Surfaces pays off once again providing constant Contact/Engagement where needed until the spent casing has been completley submitted to ejection. CNC Machined from Tool Steel heat treated & tempered to 54-58RC. Recomended for reliable feed & function with straight wall cartridges & ALL center fire Calibers PATENT PENDING MADE IN U.S.A. Improvedguns
SOLD
Rifle Caliber: 6.5 Grendel, .300 AAC Blackout, 7.62x39mm, .450 Bushmaster, .458 SOCOM, .350 Legend