 |
 |
 |
LANTAC USA Lantac LA-N1 Raven Billet Receiver Set 01-RV-SET-N15-RAVEN
Guns International #: 102088414 Seller's Inventory #: 627853
Category: AR15 Lowers - AR15 Complete Uppers
Seller's Information
When emailing or calling sellers direct, please mention that you saw their listing on GunsInternational.com
Seller: Guns Dot Com
Member Since: 9/8/21
State: Minnesota
Zip: 55337
Country: United States
Phone: (866) 582-4867
Platinum Seller
Number of Active Listings: 40558
Total Number of Listings: 405347
Seller: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns.
CERTIFIED USED GUNS Guns Certified Used Guns may be returned within 3 days after the transfer is complete for any reason for a full refund, minus any fees, shipping costs and a 15% restocking fee. A Guns Certified Used Gun may also be returned within 7 days if it is malfunctioning with proper use. NON-CERTIFIED USED GUNS Non-certified used guns can be returned if there is a mechanical defect that occurs within 3 calendar days of the physical transfer of the firearm to your possession. All other reasons for returns on non-certified used guns are ineligible.
Payment Types Accepted: Discover, Visa, MasterCard, American Express. Financing options also available.
About Us: Guns, thousands of products at great prices, you’re sure to find exactly what you’re looking for. You can be confident when you buy from us that you’ll receive an effortless experience and excellent service. Fill out the Contact Seller form below and you’ll receive a direct link via email to view and purchase this firearm at Guns. Due to to current regulations, we do not sell firearms in CT, HI and AK.
Description:
Guns Listing ID: 627853
This is a NEW Lantac LA-N1 Raven Billet Receiver Set (SKU): 01-RV-SET-N15-RAVEN. We are an authorized dealer so buy with confidence!
Machined from certified 7075-T6 Aluminum and Type 3 Hardcoat Anodized Class2, Deep Black.
Our matched billet receiver sets are manufactured to the highest quality standards with excelent fit between parts.
UAR™ Billet Upper:
The patent pending SMOOTHCAM™ system features a domed head, low friction cam pin and special upper
receiver that offer ultra smooth operation.
With its blended cam recess the UAR upper is machined from Billet 7075-T6 certified aluminum and milspec, Type3, Class2, Deep Black, Hardcoat Anodized.
The UAR™ is a precision machined upper with a special proprietary bore that is ultra smooth with a roughness average in micro inches of 16, as opposed to standard bored or milled uppers that are 32-63, or higher.
This reduces bolt carrier friction and creates a much smoother operation.
Barrel nut threads, bore and barrel extension surfaces are all machined in one operation so that they are
perfectly concentric and perpendicular to the barrel and fixing assembly.
The cam pin recess has been carefully designed with a smooth surface that flows into the main reciprocation channel.
This allows our specially designed radial, domed head cam pin to move with the minimum of wear against these internal surfaces.
The CP-R360™ Cam Pin has no moving parts to break or lock up.
Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.
Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.
The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
Finished in its natural hardened state, copper/brass color.
LA-N15™ Billet Lower Receiver
Internally flared Magazine well, to assist in loading.
45 Degree BAD Safety Selector cut.
Spotface recess to rear Takedown Pin making acess easier.
Single point cut receiver extension threads.
Enlarged Mag Button area for easier gloved operation.
Broach Cut Magwell.
Made in the USA
Stripped weight for complete set: 1lb.5oz (450g).
SOLD
Manufacturer: LANTAC USA
Model: Lantac LA-N1 Raven Billet Receiver Set 01-RV-SET-N15-RAVEN
Caliber Info: 5.56 NATO
Condition: Used - Non-Certified
Barrels: 16 BARREL
Finish: BLACK ANODIZED