to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Belgian S&W Copy Top Break Revolver .44 WCF
Belgian S&W Copy Top Break Revolver .44 WCF
Click Photo to Enlarge
Guns International #: 102042860
Seller's Inventory #: 22-10473
Category - Antique Revolvers - Cartridge
- .44 Revolvers
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Shooter's Supply, LLC.
Member Since: 3/16/16
First Name: Patrick
Last Name: Brown
State:
Tennessee
Zip: 37343
Country: United States
Phone:
(423) 875-4868
Active Listings: 26
Total Listings: 1372
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories. No returns on new firearms.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
Payment Methods: Visa, Master Card, American Express, USPS Money Order. NO CREDIT CARD FEES!!!
About Us: We are a small family owned business located in Hixson, Tennessee. Do you have firearms at home collecting dust? We have a lively consignment business. Our fee is 20% with a $50 minimum. Firearms are consigned for a an average period of 180 days but the length of period is negotiable. We also do handgun carry permit classes for the state of Tennessee. We have a nice indoor shooting range with reasonable rates. Please check us out at shooterssupply.
Belgian S&W Copy Top Break Revolver .44 WCF
Description:
Most of these revolvers were manufactured between the 1890s and 1920. The issue was that Belgium did not have many well trained metallurgists at this time. The top break revolvers they built in the .44 WCF did not have a sufficient gap between the actual firing pressure and the maximum tolerable pressure the revolver could handle. Continued firing of these revolvers with factory .44-40 ammo would wear them out eventually. The U.S. Krag rifle had similar issues with its .30-40 Krag ammunition. Any ammunition hand loaded to even a 10 percent higher pressure than factory loads would frequently result in cracks in the Krag’s bolt lug (continued shooting would eventually result in the lug failing and the bolt would then fly into the shooter’s face – not a pretty picture). These revolvers are usually stamped with just “Belgium”, “For .44 Winchester Cartridge”, a serial number, and some acceptance stamps, but no manufacturer’s mark. As such, it is difficult if not generally impossible to determine the identity of the original manufacturer. The base pin spring appears to be missing. This normally sits in a recess on top of the base pin (the cylindrical part the cylinder rotates around) and helps the cylinder catch keep the cylinder in place when the action is opened. As a general rule, the cylinder catch will keep the cylinder in place while the extractor does its job. Despite the missing spring, the cylinder spring still rotates correctly although it is a tad loose. The bore exhibits some pitting, but still exhibits a good amount of rifling. There is really no finish remaining which is not unusual for a firearm of such age. There is some minor pitting in places but nothing serious. The wooden grips are in fairly good chape for their age. All of the screws seem to be in great shape with the exception of the trigger guard screws which have some wear on the edges of the slot. It is a shame that better materials were not used in the manufacture of these revolvers as they are quite beautiful. Its interesting to note that, while the gun is a copy of the Smith & Wesson Double-Action Top Break revolvers, the hammer and trigger are styled more after the Webley series of revolvers.
SOLD
Handgun Caliber: .44-40 Winchester (.44 WCF)
Manufacturer: Belgium Manufacturer - Name Unknown
Model: Top Break
Serial Number: 1830
Bore: Rifled, 4 grooves
Chambers: 6
Ejectors: Auto-ejection
Condition: Antique
Barrels: Carbon Steel
Barrel Type: Round
Action: Double/Single Action
Triggers: Webley style trigger
Stock: Wood grips
Finish: Patina
Sights: Small U-notch rear, half-moon front sight, sight radius 6.875 inches (174.625 mm)
Description:
Most of these revolvers were manufactured between the 1890s and 1920. The issue was that Belgium did not have many well trained metallurgists at this time. The top break revolvers they built in the .44 WCF did not have a sufficient gap between the actual firing pressure and the maximum tolerable pressure the revolver could handle. Continued firing of these revolvers with factory .44-40 ammo would wear them out eventually. The U.S. Krag rifle had similar issues with its .30-40 Krag ammunition. Any ammunition hand loaded to even a 10 percent higher pressure than factory loads would frequently result in cracks in the Krag’s bolt lug (continued shooting would eventually result in the lug failing and the bolt would then fly into the shooter’s face – not a pretty picture). These revolvers are usually stamped with just “Belgium”, “For .44 Winchester Cartridge”, a serial number, and some acceptance stamps, but no manufacturer’s mark. As such, it is difficult if not generally impossible to determine the identity of the original manufacturer. The base pin spring appears to be missing. This normally sits in a recess on top of the base pin (the cylindrical part the cylinder rotates around) and helps the cylinder catch keep the cylinder in place when the action is opened. As a general rule, the cylinder catch will keep the cylinder in place while the extractor does its job. Despite the missing spring, the cylinder spring still rotates correctly although it is a tad loose. The bore exhibits some pitting, but still exhibits a good amount of rifling. There is really no finish remaining which is not unusual for a firearm of such age. There is some minor pitting in places but nothing serious. The wooden grips are in fairly good chape for their age. All of the screws seem to be in great shape with the exception of the trigger guard screws which have some wear on the edges of the slot. It is a shame that better materials were not used in the manufacture of these revolvers as they are quite beautiful. Its interesting to note that, while the gun is a copy of the Smith & Wesson Double-Action Top Break revolvers, the hammer and trigger are styled more after the Webley series of revolvers.
SOLD
Handgun Caliber: .44-40 Winchester (.44 WCF)
Manufacturer: Belgium Manufacturer - Name Unknown
Model: Top Break
Serial Number: 1830
Bore: Rifled, 4 grooves
Chambers: 6
Ejectors: Auto-ejection
Condition: Antique
Barrels: Carbon Steel
Barrel Type: Round
Action: Double/Single Action
Triggers: Webley style trigger
Stock: Wood grips
Finish: Patina
Sights: Small U-notch rear, half-moon front sight, sight radius 6.875 inches (174.625 mm)
|
Click Photo to Enlarge
|
Guns International #: 102042860
Category - Antique Revolvers - Cartridge
- .44 Revolvers
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Shooter's Supply, LLC.
Member Since: 3/16/16
First Name: Patrick
Last Name: Brown
State:
Tennessee
Zip: 37343
Country: United States
Phone:
(423) 875-4868
Active Listings: 26
Total Listings: 1372
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories. No returns on new firearms.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii. Payment Methods: Visa, Master Card, American Express, USPS Money Order. NO CREDIT CARD FEES!!!
About Us: We are a small family owned business located in Hixson, Tennessee. Do you have firearms at home collecting dust? We have a lively consignment business. Our fee is 20% with a $50 minimum. Firearms are consigned for a an average period of 180 days but the length of period is negotiable. We also do handgun carry permit classes for the state of Tennessee. We have a nice indoor shooting range with reasonable rates. Please check us out at shooterssupply.
Belgian S&W Copy Top Break Revolver .44 WCF
Description: Most of these revolvers were manufactured between the 1890s and 1920. The issue was that Belgium did not have many well trained metallurgists at this time. The top break revolvers they built in the .44 WCF did not have a sufficient gap between the actual firing pressure and the maximum tolerable pressure the revolver could handle. Continued firing of these revolvers with factory .44-40 ammo would wear them out eventually. The U.S. Krag rifle had similar issues with its .30-40 Krag ammunition. Any ammunition hand loaded to even a 10 percent higher pressure than factory loads would frequently result in cracks in the Krag’s bolt lug (continued shooting would eventually result in the lug failing and the bolt would then fly into the shooter’s face – not a pretty picture). These revolvers are usually stamped with just “Belgium”, “For .44 Winchester Cartridge”, a serial number, and some acceptance stamps, but no manufacturer’s mark. As such, it is difficult if not generally impossible to determine the identity of the original manufacturer. The base pin spring appears to be missing. This normally sits in a recess on top of the base pin (the cylindrical part the cylinder rotates around) and helps the cylinder catch keep the cylinder in place when the action is opened. As a general rule, the cylinder catch will keep the cylinder in place while the extractor does its job. Despite the missing spring, the cylinder spring still rotates correctly although it is a tad loose. The bore exhibits some pitting, but still exhibits a good amount of rifling. There is really no finish remaining which is not unusual for a firearm of such age. There is some minor pitting in places but nothing serious. The wooden grips are in fairly good chape for their age. All of the screws seem to be in great shape with the exception of the trigger guard screws which have some wear on the edges of the slot. It is a shame that better materials were not used in the manufacture of these revolvers as they are quite beautiful. Its interesting to note that, while the gun is a copy of the Smith & Wesson Double-Action Top Break revolvers, the hammer and trigger are styled more after the Webley series of revolvers. SOLD Handgun Caliber: .44-40 Winchester (.44 WCF) Manufacturer: Belgium Manufacturer - Name Unknown Model: Top Break Serial Number: 1830 Bore: Rifled, 4 grooves Chambers: 6 Ejectors: Auto-ejection Condition: Antique Barrels: Carbon Steel Barrel Type: Round Action: Double/Single Action Triggers: Webley style trigger Stock: Wood grips Finish: Patina Sights: Small U-notch rear, half-moon front sight, sight radius 6.875 inches (174.625 mm) |
Click Photo to Enlarge
Guns International #: 102042860
Seller's Inventory #: 22-10473
Category - Antique Revolvers - Cartridge
- .44 Revolvers
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Shooter's Supply, LLC.
Member Since: 3/16/16
First Name: Patrick
Last Name: Brown
State:
Tennessee
Zip: 37343
Country: United States
Phone:
(423) 875-4868
Active Listings: 26
Total Listings: 1372
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories. No returns on new firearms.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
Payment Methods: Visa, Master Card, American Express, USPS Money Order. NO CREDIT CARD FEES!!!
About Us: We are a small family owned business located in Hixson, Tennessee. Do you have firearms at home collecting dust? We have a lively consignment business. Our fee is 20% with a $50 minimum. Firearms are consigned for a an average period of 180 days but the length of period is negotiable. We also do handgun carry permit classes for the state of Tennessee. We have a nice indoor shooting range with reasonable rates. Please check us out at shooterssupply.
Belgian S&W Copy Top Break Revolver .44 WCF
Description:
Most of these revolvers were manufactured between the 1890s and 1920. The issue was that Belgium did not have many well trained metallurgists at this time. The top break revolvers they built in the .44 WCF did not have a sufficient gap between the actual firing pressure and the maximum tolerable pressure the revolver could handle. Continued firing of these revolvers with factory .44-40 ammo would wear them out eventually. The U.S. Krag rifle had similar issues with its .30-40 Krag ammunition. Any ammunition hand loaded to even a 10 percent higher pressure than factory loads would frequently result in cracks in the Krag’s bolt lug (continued shooting would eventually result in the lug failing and the bolt would then fly into the shooter’s face – not a pretty picture). These revolvers are usually stamped with just “Belgium”, “For .44 Winchester Cartridge”, a serial number, and some acceptance stamps, but no manufacturer’s mark. As such, it is difficult if not generally impossible to determine the identity of the original manufacturer. The base pin spring appears to be missing. This normally sits in a recess on top of the base pin (the cylindrical part the cylinder rotates around) and helps the cylinder catch keep the cylinder in place when the action is opened. As a general rule, the cylinder catch will keep the cylinder in place while the extractor does its job. Despite the missing spring, the cylinder spring still rotates correctly although it is a tad loose. The bore exhibits some pitting, but still exhibits a good amount of rifling. There is really no finish remaining which is not unusual for a firearm of such age. There is some minor pitting in places but nothing serious. The wooden grips are in fairly good chape for their age. All of the screws seem to be in great shape with the exception of the trigger guard screws which have some wear on the edges of the slot. It is a shame that better materials were not used in the manufacture of these revolvers as they are quite beautiful. Its interesting to note that, while the gun is a copy of the Smith & Wesson Double-Action Top Break revolvers, the hammer and trigger are styled more after the Webley series of revolvers.
SOLD
Handgun Caliber: .44-40 Winchester (.44 WCF)
Manufacturer: Belgium Manufacturer - Name Unknown
Model: Top Break
Serial Number: 1830
Bore: Rifled, 4 grooves
Chambers: 6
Ejectors: Auto-ejection
Condition: Antique
Barrels: Carbon Steel
Barrel Type: Round
Action: Double/Single Action
Triggers: Webley style trigger
Stock: Wood grips
Finish: Patina
Sights: Small U-notch rear, half-moon front sight, sight radius 6.875 inches (174.625 mm)
Description:
Most of these revolvers were manufactured between the 1890s and 1920. The issue was that Belgium did not have many well trained metallurgists at this time. The top break revolvers they built in the .44 WCF did not have a sufficient gap between the actual firing pressure and the maximum tolerable pressure the revolver could handle. Continued firing of these revolvers with factory .44-40 ammo would wear them out eventually. The U.S. Krag rifle had similar issues with its .30-40 Krag ammunition. Any ammunition hand loaded to even a 10 percent higher pressure than factory loads would frequently result in cracks in the Krag’s bolt lug (continued shooting would eventually result in the lug failing and the bolt would then fly into the shooter’s face – not a pretty picture). These revolvers are usually stamped with just “Belgium”, “For .44 Winchester Cartridge”, a serial number, and some acceptance stamps, but no manufacturer’s mark. As such, it is difficult if not generally impossible to determine the identity of the original manufacturer. The base pin spring appears to be missing. This normally sits in a recess on top of the base pin (the cylindrical part the cylinder rotates around) and helps the cylinder catch keep the cylinder in place when the action is opened. As a general rule, the cylinder catch will keep the cylinder in place while the extractor does its job. Despite the missing spring, the cylinder spring still rotates correctly although it is a tad loose. The bore exhibits some pitting, but still exhibits a good amount of rifling. There is really no finish remaining which is not unusual for a firearm of such age. There is some minor pitting in places but nothing serious. The wooden grips are in fairly good chape for their age. All of the screws seem to be in great shape with the exception of the trigger guard screws which have some wear on the edges of the slot. It is a shame that better materials were not used in the manufacture of these revolvers as they are quite beautiful. Its interesting to note that, while the gun is a copy of the Smith & Wesson Double-Action Top Break revolvers, the hammer and trigger are styled more after the Webley series of revolvers.
SOLD
Handgun Caliber: .44-40 Winchester (.44 WCF)
Manufacturer: Belgium Manufacturer - Name Unknown
Model: Top Break
Serial Number: 1830
Bore: Rifled, 4 grooves
Chambers: 6
Ejectors: Auto-ejection
Condition: Antique
Barrels: Carbon Steel
Barrel Type: Round
Action: Double/Single Action
Triggers: Webley style trigger
Stock: Wood grips
Finish: Patina
Sights: Small U-notch rear, half-moon front sight, sight radius 6.875 inches (174.625 mm)
Guns International #: 102042860
Seller's Inventory #: 22-10473
Guns International #: 102042860
Seller's Inventory #: 22-10473
Category - Antique Revolvers - Cartridge
- .44 Revolvers
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Shooter's Supply, LLC.
Member Since: 3/16/16
First Name: Patrick
Last Name: Brown
State:
Tennessee
Zip: 37343
Country: United States
Phone:
(423) 875-4868
Active Listings: 26
Total Listings: 1372
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories. No returns on new firearms.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
Payment Methods: Visa, Master Card, American Express, USPS Money Order. NO CREDIT CARD FEES!!!
About Us: We are a small family owned business located in Hixson, Tennessee. Do you have firearms at home collecting dust? We have a lively consignment business. Our fee is 20% with a $50 minimum. Firearms are consigned for a an average period of 180 days but the length of period is negotiable. We also do handgun carry permit classes for the state of Tennessee. We have a nice indoor shooting range with reasonable rates. Please check us out at shooterssupply.
Belgian S&W Copy Top Break Revolver .44 WCF
Description:
Most of these revolvers were manufactured between the 1890s and 1920. The issue was that Belgium did not have many well trained metallurgists at this time. The top break revolvers they built in the .44 WCF did not have a sufficient gap between the actual firing pressure and the maximum tolerable pressure the revolver could handle. Continued firing of these revolvers with factory .44-40 ammo would wear them out eventually. The U.S. Krag rifle had similar issues with its .30-40 Krag ammunition. Any ammunition hand loaded to even a 10 percent higher pressure than factory loads would frequently result in cracks in the Krag’s bolt lug (continued shooting would eventually result in the lug failing and the bolt would then fly into the shooter’s face – not a pretty picture). These revolvers are usually stamped with just “Belgium”, “For .44 Winchester Cartridge”, a serial number, and some acceptance stamps, but no manufacturer’s mark. As such, it is difficult if not generally impossible to determine the identity of the original manufacturer. The base pin spring appears to be missing. This normally sits in a recess on top of the base pin (the cylindrical part the cylinder rotates around) and helps the cylinder catch keep the cylinder in place when the action is opened. As a general rule, the cylinder catch will keep the cylinder in place while the extractor does its job. Despite the missing spring, the cylinder spring still rotates correctly although it is a tad loose. The bore exhibits some pitting, but still exhibits a good amount of rifling. There is really no finish remaining which is not unusual for a firearm of such age. There is some minor pitting in places but nothing serious. The wooden grips are in fairly good chape for their age. All of the screws seem to be in great shape with the exception of the trigger guard screws which have some wear on the edges of the slot. It is a shame that better materials were not used in the manufacture of these revolvers as they are quite beautiful. Its interesting to note that, while the gun is a copy of the Smith & Wesson Double-Action Top Break revolvers, the hammer and trigger are styled more after the Webley series of revolvers.
SOLD
Handgun Caliber: .44-40 Winchester (.44 WCF)
Manufacturer: Belgium Manufacturer - Name Unknown
Model: Top Break
Serial Number: 1830
Bore: Rifled, 4 grooves
Chambers: 6
Ejectors: Auto-ejection
Condition: Antique
Barrels: Carbon Steel
Barrel Type: Round
Action: Double/Single Action
Triggers: Webley style trigger
Stock: Wood grips
Finish: Patina
Sights: Small U-notch rear, half-moon front sight, sight radius 6.875 inches (174.625 mm)
Description:
Most of these revolvers were manufactured between the 1890s and 1920. The issue was that Belgium did not have many well trained metallurgists at this time. The top break revolvers they built in the .44 WCF did not have a sufficient gap between the actual firing pressure and the maximum tolerable pressure the revolver could handle. Continued firing of these revolvers with factory .44-40 ammo would wear them out eventually. The U.S. Krag rifle had similar issues with its .30-40 Krag ammunition. Any ammunition hand loaded to even a 10 percent higher pressure than factory loads would frequently result in cracks in the Krag’s bolt lug (continued shooting would eventually result in the lug failing and the bolt would then fly into the shooter’s face – not a pretty picture). These revolvers are usually stamped with just “Belgium”, “For .44 Winchester Cartridge”, a serial number, and some acceptance stamps, but no manufacturer’s mark. As such, it is difficult if not generally impossible to determine the identity of the original manufacturer. The base pin spring appears to be missing. This normally sits in a recess on top of the base pin (the cylindrical part the cylinder rotates around) and helps the cylinder catch keep the cylinder in place when the action is opened. As a general rule, the cylinder catch will keep the cylinder in place while the extractor does its job. Despite the missing spring, the cylinder spring still rotates correctly although it is a tad loose. The bore exhibits some pitting, but still exhibits a good amount of rifling. There is really no finish remaining which is not unusual for a firearm of such age. There is some minor pitting in places but nothing serious. The wooden grips are in fairly good chape for their age. All of the screws seem to be in great shape with the exception of the trigger guard screws which have some wear on the edges of the slot. It is a shame that better materials were not used in the manufacture of these revolvers as they are quite beautiful. Its interesting to note that, while the gun is a copy of the Smith & Wesson Double-Action Top Break revolvers, the hammer and trigger are styled more after the Webley series of revolvers.
SOLD
Handgun Caliber: .44-40 Winchester (.44 WCF)
Manufacturer: Belgium Manufacturer - Name Unknown
Model: Top Break
Serial Number: 1830
Bore: Rifled, 4 grooves
Chambers: 6
Ejectors: Auto-ejection
Condition: Antique
Barrels: Carbon Steel
Barrel Type: Round
Action: Double/Single Action
Triggers: Webley style trigger
Stock: Wood grips
Finish: Patina
Sights: Small U-notch rear, half-moon front sight, sight radius 6.875 inches (174.625 mm)
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww2
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww2
Guns International.com | V4.1 ww2