to Favorites
1 of 11
2 of 11
3 of 11
4 of 11
5 of 11
6 of 11
7 of 11
8 of 11
9 of 11
10 of 11
11 of 11
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Colt Official Police Custom Single-Action-Only .38 Special Target Revolver for sale
Colt Official Police Custom Single-Action-Only .38 Special Target Revolver for sale
Click Photo to Enlarge
Guns International #: 102851921
Colt Official Police Custom Single-Action-Only .38 Special Target Revolver
Description:
This Listing from an avid shooter's collection is a Used; Circa 1931 ; SN 569,5XX; Colt Official Police (continuation of the Army Special) .38 Special; Target Revolver with Custom Features. Lack of barrel markings, patent dates and other limitations make it difficult to tell if this is a 1931 O.P. (most likely) or a 1950 Officer’s Model (less likely because of the older style ejector rod tip, on the old style fine serrations on the grooved [not flat-top] topstrap). On this revolver, the Hammer has no Double-Action Fly Mechanism (Strut, Spring, and Pin) – making it Single Action Only. What appears to be the original 6-inch barrel has been professionally sleeved to eliminate the taper, add weight and increase the sight radius. The sleeved barrel O.D. is just over ¾ inch; the length is approximately 6-¼ inches – with a sight radius of approximately 7-½ inches from the front edge of the Micro-brand Windage and Elevation Click-Adjustable Rear Sight to the rear edge of the Tall Undercut Target Front Sight. Photos show the barrel recessed within the outer sleeve. The Hammer is deeply and sharply custom-checkered, and may be a Colt Officer’s Model Target or Officer’s Model Match Hammer – or a Custom job like the Trigger. The approximately ½ inch Wide Custom Trigger is also sharply checkered and slightly angled towards the right side for optimal operation when the trigger finger is positioned naturally. The Hammer and Trigger treatments are reminiscent of King’s (San Francisco) revolvers in this collection – but are unmarked. The barrel (sleeve) has superficial scratches, as does the front/outer edge of the cylinder. The Cylinder has a prominent line in the bluing that does not catch our fingernail. Blue is worn away under the Cylinder Latch and along the face of the latch where the star-wheel crosses on opening and closing. Chambers show light striations ahead of the case mouth. Otherwise, the chambers are bright and shiny and the bore is mirror bright with sharp rifling. This revolver appears polished and reblued during the custom work; the rampant Colt trademark is no longer visible on the left side of the frame. Not being dealers or experts, we estimate the condition at better than 80 Percent of the Refinished (emphasis on Refinished) bluing. Please ask any questions or request additional information before purchase as this item will be troublesome and costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees (greater than $150) after buyer pays return shipping. The listed price Includes Insured Air Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Curio/Relic: Yes
Handgun Caliber: .38 Special
Manufacturer: Colt
Model: Official Police or Officer's
Serial Number: 569,5xx
Barrel Length: 6-1/4 Inch (approx)
Price: $995.00
Description:
This Listing from an avid shooter's collection is a Used; Circa 1931 ; SN 569,5XX; Colt Official Police (continuation of the Army Special) .38 Special; Target Revolver with Custom Features. Lack of barrel markings, patent dates and other limitations make it difficult to tell if this is a 1931 O.P. (most likely) or a 1950 Officer’s Model (less likely because of the older style ejector rod tip, on the old style fine serrations on the grooved [not flat-top] topstrap). On this revolver, the Hammer has no Double-Action Fly Mechanism (Strut, Spring, and Pin) – making it Single Action Only. What appears to be the original 6-inch barrel has been professionally sleeved to eliminate the taper, add weight and increase the sight radius. The sleeved barrel O.D. is just over ¾ inch; the length is approximately 6-¼ inches – with a sight radius of approximately 7-½ inches from the front edge of the Micro-brand Windage and Elevation Click-Adjustable Rear Sight to the rear edge of the Tall Undercut Target Front Sight. Photos show the barrel recessed within the outer sleeve. The Hammer is deeply and sharply custom-checkered, and may be a Colt Officer’s Model Target or Officer’s Model Match Hammer – or a Custom job like the Trigger. The approximately ½ inch Wide Custom Trigger is also sharply checkered and slightly angled towards the right side for optimal operation when the trigger finger is positioned naturally. The Hammer and Trigger treatments are reminiscent of King’s (San Francisco) revolvers in this collection – but are unmarked. The barrel (sleeve) has superficial scratches, as does the front/outer edge of the cylinder. The Cylinder has a prominent line in the bluing that does not catch our fingernail. Blue is worn away under the Cylinder Latch and along the face of the latch where the star-wheel crosses on opening and closing. Chambers show light striations ahead of the case mouth. Otherwise, the chambers are bright and shiny and the bore is mirror bright with sharp rifling. This revolver appears polished and reblued during the custom work; the rampant Colt trademark is no longer visible on the left side of the frame. Not being dealers or experts, we estimate the condition at better than 80 Percent of the Refinished (emphasis on Refinished) bluing. Please ask any questions or request additional information before purchase as this item will be troublesome and costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees (greater than $150) after buyer pays return shipping. The listed price Includes Insured Air Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Curio/Relic: Yes
Handgun Caliber: .38 Special
Manufacturer: Colt
Model: Official Police or Officer's
Serial Number: 569,5xx
Barrel Length: 6-1/4 Inch (approx)
Price: $995.00
Contact Seller
|
Click Photo to Enlarge
|
Guns International #: 102851921
Colt Official Police Custom Single-Action-Only .38 Special Target Revolver
Description: This Listing from an avid shooter's collection is a Used; Circa 1931 ; SN 569,5XX; Colt Official Police (continuation of the Army Special) .38 Special; Target Revolver with Custom Features. Lack of barrel markings, patent dates and other limitations make it difficult to tell if this is a 1931 O.P. (most likely) or a 1950 Officer’s Model (less likely because of the older style ejector rod tip, on the old style fine serrations on the grooved [not flat-top] topstrap). On this revolver, the Hammer has no Double-Action Fly Mechanism (Strut, Spring, and Pin) – making it Single Action Only. What appears to be the original 6-inch barrel has been professionally sleeved to eliminate the taper, add weight and increase the sight radius. The sleeved barrel O.D. is just over ¾ inch; the length is approximately 6-¼ inches – with a sight radius of approximately 7-½ inches from the front edge of the Micro-brand Windage and Elevation Click-Adjustable Rear Sight to the rear edge of the Tall Undercut Target Front Sight. Photos show the barrel recessed within the outer sleeve. The Hammer is deeply and sharply custom-checkered, and may be a Colt Officer’s Model Target or Officer’s Model Match Hammer – or a Custom job like the Trigger. The approximately ½ inch Wide Custom Trigger is also sharply checkered and slightly angled towards the right side for optimal operation when the trigger finger is positioned naturally. The Hammer and Trigger treatments are reminiscent of King’s (San Francisco) revolvers in this collection – but are unmarked. The barrel (sleeve) has superficial scratches, as does the front/outer edge of the cylinder. The Cylinder has a prominent line in the bluing that does not catch our fingernail. Blue is worn away under the Cylinder Latch and along the face of the latch where the star-wheel crosses on opening and closing. Chambers show light striations ahead of the case mouth. Otherwise, the chambers are bright and shiny and the bore is mirror bright with sharp rifling. This revolver appears polished and reblued during the custom work; the rampant Colt trademark is no longer visible on the left side of the frame. Not being dealers or experts, we estimate the condition at better than 80 Percent of the Refinished (emphasis on Refinished) bluing. Please ask any questions or request additional information before purchase as this item will be troublesome and costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees (greater than $150) after buyer pays return shipping. The listed price Includes Insured Air Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale. Curio/Relic: Yes Handgun Caliber: .38 Special Manufacturer: Colt Model: Official Police or Officer's Serial Number: 569,5xx Barrel Length: 6-1/4 Inch (approx) Price: $995.00 Contact Seller |
Click Photo to Enlarge
Guns International #: 102851921
Colt Official Police Custom Single-Action-Only .38 Special Target Revolver
Description:
This Listing from an avid shooter's collection is a Used; Circa 1931 ; SN 569,5XX; Colt Official Police (continuation of the Army Special) .38 Special; Target Revolver with Custom Features. Lack of barrel markings, patent dates and other limitations make it difficult to tell if this is a 1931 O.P. (most likely) or a 1950 Officer’s Model (less likely because of the older style ejector rod tip, on the old style fine serrations on the grooved [not flat-top] topstrap). On this revolver, the Hammer has no Double-Action Fly Mechanism (Strut, Spring, and Pin) – making it Single Action Only. What appears to be the original 6-inch barrel has been professionally sleeved to eliminate the taper, add weight and increase the sight radius. The sleeved barrel O.D. is just over ¾ inch; the length is approximately 6-¼ inches – with a sight radius of approximately 7-½ inches from the front edge of the Micro-brand Windage and Elevation Click-Adjustable Rear Sight to the rear edge of the Tall Undercut Target Front Sight. Photos show the barrel recessed within the outer sleeve. The Hammer is deeply and sharply custom-checkered, and may be a Colt Officer’s Model Target or Officer’s Model Match Hammer – or a Custom job like the Trigger. The approximately ½ inch Wide Custom Trigger is also sharply checkered and slightly angled towards the right side for optimal operation when the trigger finger is positioned naturally. The Hammer and Trigger treatments are reminiscent of King’s (San Francisco) revolvers in this collection – but are unmarked. The barrel (sleeve) has superficial scratches, as does the front/outer edge of the cylinder. The Cylinder has a prominent line in the bluing that does not catch our fingernail. Blue is worn away under the Cylinder Latch and along the face of the latch where the star-wheel crosses on opening and closing. Chambers show light striations ahead of the case mouth. Otherwise, the chambers are bright and shiny and the bore is mirror bright with sharp rifling. This revolver appears polished and reblued during the custom work; the rampant Colt trademark is no longer visible on the left side of the frame. Not being dealers or experts, we estimate the condition at better than 80 Percent of the Refinished (emphasis on Refinished) bluing. Please ask any questions or request additional information before purchase as this item will be troublesome and costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees (greater than $150) after buyer pays return shipping. The listed price Includes Insured Air Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Curio/Relic: Yes
Handgun Caliber: .38 Special
Manufacturer: Colt
Model: Official Police or Officer's
Serial Number: 569,5xx
Barrel Length: 6-1/4 Inch (approx)
Price: $995.00
Description:
This Listing from an avid shooter's collection is a Used; Circa 1931 ; SN 569,5XX; Colt Official Police (continuation of the Army Special) .38 Special; Target Revolver with Custom Features. Lack of barrel markings, patent dates and other limitations make it difficult to tell if this is a 1931 O.P. (most likely) or a 1950 Officer’s Model (less likely because of the older style ejector rod tip, on the old style fine serrations on the grooved [not flat-top] topstrap). On this revolver, the Hammer has no Double-Action Fly Mechanism (Strut, Spring, and Pin) – making it Single Action Only. What appears to be the original 6-inch barrel has been professionally sleeved to eliminate the taper, add weight and increase the sight radius. The sleeved barrel O.D. is just over ¾ inch; the length is approximately 6-¼ inches – with a sight radius of approximately 7-½ inches from the front edge of the Micro-brand Windage and Elevation Click-Adjustable Rear Sight to the rear edge of the Tall Undercut Target Front Sight. Photos show the barrel recessed within the outer sleeve. The Hammer is deeply and sharply custom-checkered, and may be a Colt Officer’s Model Target or Officer’s Model Match Hammer – or a Custom job like the Trigger. The approximately ½ inch Wide Custom Trigger is also sharply checkered and slightly angled towards the right side for optimal operation when the trigger finger is positioned naturally. The Hammer and Trigger treatments are reminiscent of King’s (San Francisco) revolvers in this collection – but are unmarked. The barrel (sleeve) has superficial scratches, as does the front/outer edge of the cylinder. The Cylinder has a prominent line in the bluing that does not catch our fingernail. Blue is worn away under the Cylinder Latch and along the face of the latch where the star-wheel crosses on opening and closing. Chambers show light striations ahead of the case mouth. Otherwise, the chambers are bright and shiny and the bore is mirror bright with sharp rifling. This revolver appears polished and reblued during the custom work; the rampant Colt trademark is no longer visible on the left side of the frame. Not being dealers or experts, we estimate the condition at better than 80 Percent of the Refinished (emphasis on Refinished) bluing. Please ask any questions or request additional information before purchase as this item will be troublesome and costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees (greater than $150) after buyer pays return shipping. The listed price Includes Insured Air Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Curio/Relic: Yes
Handgun Caliber: .38 Special
Manufacturer: Colt
Model: Official Police or Officer's
Serial Number: 569,5xx
Barrel Length: 6-1/4 Inch (approx)
Price: $995.00
Guns International #: 102851921
Guns International #: 102851921
Colt Official Police Custom Single-Action-Only .38 Special Target Revolver
Description:
This Listing from an avid shooter's collection is a Used; Circa 1931 ; SN 569,5XX; Colt Official Police (continuation of the Army Special) .38 Special; Target Revolver with Custom Features. Lack of barrel markings, patent dates and other limitations make it difficult to tell if this is a 1931 O.P. (most likely) or a 1950 Officer’s Model (less likely because of the older style ejector rod tip, on the old style fine serrations on the grooved [not flat-top] topstrap). On this revolver, the Hammer has no Double-Action Fly Mechanism (Strut, Spring, and Pin) – making it Single Action Only. What appears to be the original 6-inch barrel has been professionally sleeved to eliminate the taper, add weight and increase the sight radius. The sleeved barrel O.D. is just over ¾ inch; the length is approximately 6-¼ inches – with a sight radius of approximately 7-½ inches from the front edge of the Micro-brand Windage and Elevation Click-Adjustable Rear Sight to the rear edge of the Tall Undercut Target Front Sight. Photos show the barrel recessed within the outer sleeve. The Hammer is deeply and sharply custom-checkered, and may be a Colt Officer’s Model Target or Officer’s Model Match Hammer – or a Custom job like the Trigger. The approximately ½ inch Wide Custom Trigger is also sharply checkered and slightly angled towards the right side for optimal operation when the trigger finger is positioned naturally. The Hammer and Trigger treatments are reminiscent of King’s (San Francisco) revolvers in this collection – but are unmarked. The barrel (sleeve) has superficial scratches, as does the front/outer edge of the cylinder. The Cylinder has a prominent line in the bluing that does not catch our fingernail. Blue is worn away under the Cylinder Latch and along the face of the latch where the star-wheel crosses on opening and closing. Chambers show light striations ahead of the case mouth. Otherwise, the chambers are bright and shiny and the bore is mirror bright with sharp rifling. This revolver appears polished and reblued during the custom work; the rampant Colt trademark is no longer visible on the left side of the frame. Not being dealers or experts, we estimate the condition at better than 80 Percent of the Refinished (emphasis on Refinished) bluing. Please ask any questions or request additional information before purchase as this item will be troublesome and costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees (greater than $150) after buyer pays return shipping. The listed price Includes Insured Air Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Curio/Relic: Yes
Handgun Caliber: .38 Special
Manufacturer: Colt
Model: Official Police or Officer's
Serial Number: 569,5xx
Barrel Length: 6-1/4 Inch (approx)
Price: $995.00
Description:
This Listing from an avid shooter's collection is a Used; Circa 1931 ; SN 569,5XX; Colt Official Police (continuation of the Army Special) .38 Special; Target Revolver with Custom Features. Lack of barrel markings, patent dates and other limitations make it difficult to tell if this is a 1931 O.P. (most likely) or a 1950 Officer’s Model (less likely because of the older style ejector rod tip, on the old style fine serrations on the grooved [not flat-top] topstrap). On this revolver, the Hammer has no Double-Action Fly Mechanism (Strut, Spring, and Pin) – making it Single Action Only. What appears to be the original 6-inch barrel has been professionally sleeved to eliminate the taper, add weight and increase the sight radius. The sleeved barrel O.D. is just over ¾ inch; the length is approximately 6-¼ inches – with a sight radius of approximately 7-½ inches from the front edge of the Micro-brand Windage and Elevation Click-Adjustable Rear Sight to the rear edge of the Tall Undercut Target Front Sight. Photos show the barrel recessed within the outer sleeve. The Hammer is deeply and sharply custom-checkered, and may be a Colt Officer’s Model Target or Officer’s Model Match Hammer – or a Custom job like the Trigger. The approximately ½ inch Wide Custom Trigger is also sharply checkered and slightly angled towards the right side for optimal operation when the trigger finger is positioned naturally. The Hammer and Trigger treatments are reminiscent of King’s (San Francisco) revolvers in this collection – but are unmarked. The barrel (sleeve) has superficial scratches, as does the front/outer edge of the cylinder. The Cylinder has a prominent line in the bluing that does not catch our fingernail. Blue is worn away under the Cylinder Latch and along the face of the latch where the star-wheel crosses on opening and closing. Chambers show light striations ahead of the case mouth. Otherwise, the chambers are bright and shiny and the bore is mirror bright with sharp rifling. This revolver appears polished and reblued during the custom work; the rampant Colt trademark is no longer visible on the left side of the frame. Not being dealers or experts, we estimate the condition at better than 80 Percent of the Refinished (emphasis on Refinished) bluing. Please ask any questions or request additional information before purchase as this item will be troublesome and costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees (greater than $150) after buyer pays return shipping. The listed price Includes Insured Air Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Curio/Relic: Yes
Handgun Caliber: .38 Special
Manufacturer: Colt
Model: Official Police or Officer's
Serial Number: 569,5xx
Barrel Length: 6-1/4 Inch (approx)
Price: $995.00
Contact Seller
Buy Now
Pay with GunTab
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww2
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww2
Guns International.com | V4.1 ww2