to Favorites
1 of 16
2 of 16
3 of 16
4 of 16
5 of 16
6 of 16
7 of 16
8 of 16
9 of 16
10 of 16
11 of 16
12 of 16
13 of 16
14 of 16
15 of 16
16 of 16
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Click Photo to Enlarge
Guns International #: 101420412
Seller's Inventory #: 20213
Category - Merwin & Hulbert Revolvers
- Antique Revolvers - Cartridge
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: AncestryGunsLLC
Company: Ancestry Guns LLC
Company: Ancestry Guns LLC
Member Since: 11/3/16
State:
Missouri
Zip: 65203
Country: United States
Phone:
(314) 707-7373
Int'l Phone:
314-707-7373
Platinum Seller
Active Listings: 1052
Total Listings: 42339
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Credit Card, Certified Check, Money Order
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Description:
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver
Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Here we present an antique Merwin, Hulbert & Co. Large Frame “Open Top” Army Caliber Single Action Revolver, made circa 1876-1878 in Norwich, Connecticut. These were made by Hopkins & Allen for Merwin, Hulbert & Co. Only several thousand are thought to have been produced. These revolvers are considered today to be some of the best made of the late 19th Century and the Wild West, even better to some than similar Colts and Smith & Wessons, though we all know who stood the test of time. These revolvers certainly tended to have different, very well-thought features than their competition, and they were extremely well-made.
One such feature was the method of ejection. Loading was achieved by placing the hammer at half-cock and sliding down the loading gate to single feed cartridges. If one wanted to unload the gun, they could simply push the latch back on the bottom of the gun, twist the barrel and cylinder assembly and pull forward. Only the empty brass would come out as the space created was shorter than a loaded cartridge, enabling the shooter to top of his gun and keep rounds available. An ingenious method was designed to achieve this that included a machined cut on the cylinder axis pin and a ledge on the breech face that kept the cartridge rims underneath. This system was also advantageous for forcefully removing stuck cartridges, providing lots of mechanical advantage.
The overall condition is good. The action functions, and the cylinder indexes to the next chamber though lockup is weak (probably needs a new cylinder bolt spring). Good bore with strong rifling. The walnut grips are solid and remain in good shape.
Own the original! This is a legitimate antique and not a reproduction.
Barrel is 4-3/4 inches.
Caliber: .44 M&H (Merwin & Hulbert)
Overall condition as seen in photos.
Very Fast. Very Safe. FREE SHIPPING WORLDWIDE. Delivered directly to your door by express mail!
Guaranteed AUTHENTIC & Includes CERTIFICATE OF AUTHENTICITY.
ancestryguns
$2250
#20213
SOLD
Antique: Yes
Description:
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver
Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Here we present an antique Merwin, Hulbert & Co. Large Frame “Open Top” Army Caliber Single Action Revolver, made circa 1876-1878 in Norwich, Connecticut. These were made by Hopkins & Allen for Merwin, Hulbert & Co. Only several thousand are thought to have been produced. These revolvers are considered today to be some of the best made of the late 19th Century and the Wild West, even better to some than similar Colts and Smith & Wessons, though we all know who stood the test of time. These revolvers certainly tended to have different, very well-thought features than their competition, and they were extremely well-made.
One such feature was the method of ejection. Loading was achieved by placing the hammer at half-cock and sliding down the loading gate to single feed cartridges. If one wanted to unload the gun, they could simply push the latch back on the bottom of the gun, twist the barrel and cylinder assembly and pull forward. Only the empty brass would come out as the space created was shorter than a loaded cartridge, enabling the shooter to top of his gun and keep rounds available. An ingenious method was designed to achieve this that included a machined cut on the cylinder axis pin and a ledge on the breech face that kept the cartridge rims underneath. This system was also advantageous for forcefully removing stuck cartridges, providing lots of mechanical advantage.
The overall condition is good. The action functions, and the cylinder indexes to the next chamber though lockup is weak (probably needs a new cylinder bolt spring). Good bore with strong rifling. The walnut grips are solid and remain in good shape.
Own the original! This is a legitimate antique and not a reproduction.
Barrel is 4-3/4 inches.
Caliber: .44 M&H (Merwin & Hulbert)
Overall condition as seen in photos.
Very Fast. Very Safe. FREE SHIPPING WORLDWIDE. Delivered directly to your door by express mail!
Guaranteed AUTHENTIC & Includes CERTIFICATE OF AUTHENTICITY.
ancestryguns
$2250
#20213
SOLD
Antique: Yes
|
Click Photo to Enlarge
|
Guns International #: 101420412
Category - Merwin & Hulbert Revolvers
- Antique Revolvers - Cartridge
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: AncestryGunsLLC
Company: Ancestry Guns LLC Member Since: 11/3/16
State:
Missouri
Zip: 65203
Country: United States
Phone:
(314) 707-7373
Int'l Phone:
314-707-7373
Platinum Seller
Active Listings: 1052
Total Listings: 42339
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Credit Card, Certified Check, Money Order
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Description: .44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44! Here we present an antique Merwin, Hulbert & Co. Large Frame “Open Top” Army Caliber Single Action Revolver, made circa 1876-1878 in Norwich, Connecticut. These were made by Hopkins & Allen for Merwin, Hulbert & Co. Only several thousand are thought to have been produced. These revolvers are considered today to be some of the best made of the late 19th Century and the Wild West, even better to some than similar Colts and Smith & Wessons, though we all know who stood the test of time. These revolvers certainly tended to have different, very well-thought features than their competition, and they were extremely well-made. One such feature was the method of ejection. Loading was achieved by placing the hammer at half-cock and sliding down the loading gate to single feed cartridges. If one wanted to unload the gun, they could simply push the latch back on the bottom of the gun, twist the barrel and cylinder assembly and pull forward. Only the empty brass would come out as the space created was shorter than a loaded cartridge, enabling the shooter to top of his gun and keep rounds available. An ingenious method was designed to achieve this that included a machined cut on the cylinder axis pin and a ledge on the breech face that kept the cartridge rims underneath. This system was also advantageous for forcefully removing stuck cartridges, providing lots of mechanical advantage. The overall condition is good. The action functions, and the cylinder indexes to the next chamber though lockup is weak (probably needs a new cylinder bolt spring). Good bore with strong rifling. The walnut grips are solid and remain in good shape. Own the original! This is a legitimate antique and not a reproduction. Barrel is 4-3/4 inches. Caliber: .44 M&H (Merwin & Hulbert) Overall condition as seen in photos. Very Fast. Very Safe. FREE SHIPPING WORLDWIDE. Delivered directly to your door by express mail! Guaranteed AUTHENTIC & Includes CERTIFICATE OF AUTHENTICITY. ancestryguns $2250 #20213 SOLD Antique: Yes |
Click Photo to Enlarge
Guns International #: 101420412
Seller's Inventory #: 20213
Category - Merwin & Hulbert Revolvers
- Antique Revolvers - Cartridge
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: AncestryGunsLLC
Company: Ancestry Guns LLC
Company: Ancestry Guns LLC
Member Since: 11/3/16
State:
Missouri
Zip: 65203
Country: United States
Phone:
(314) 707-7373
Int'l Phone:
314-707-7373
Platinum Seller
Active Listings: 1052
Total Listings: 42339
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Credit Card, Certified Check, Money Order
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Description:
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver
Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Here we present an antique Merwin, Hulbert & Co. Large Frame “Open Top” Army Caliber Single Action Revolver, made circa 1876-1878 in Norwich, Connecticut. These were made by Hopkins & Allen for Merwin, Hulbert & Co. Only several thousand are thought to have been produced. These revolvers are considered today to be some of the best made of the late 19th Century and the Wild West, even better to some than similar Colts and Smith & Wessons, though we all know who stood the test of time. These revolvers certainly tended to have different, very well-thought features than their competition, and they were extremely well-made.
One such feature was the method of ejection. Loading was achieved by placing the hammer at half-cock and sliding down the loading gate to single feed cartridges. If one wanted to unload the gun, they could simply push the latch back on the bottom of the gun, twist the barrel and cylinder assembly and pull forward. Only the empty brass would come out as the space created was shorter than a loaded cartridge, enabling the shooter to top of his gun and keep rounds available. An ingenious method was designed to achieve this that included a machined cut on the cylinder axis pin and a ledge on the breech face that kept the cartridge rims underneath. This system was also advantageous for forcefully removing stuck cartridges, providing lots of mechanical advantage.
The overall condition is good. The action functions, and the cylinder indexes to the next chamber though lockup is weak (probably needs a new cylinder bolt spring). Good bore with strong rifling. The walnut grips are solid and remain in good shape.
Own the original! This is a legitimate antique and not a reproduction.
Barrel is 4-3/4 inches.
Caliber: .44 M&H (Merwin & Hulbert)
Overall condition as seen in photos.
Very Fast. Very Safe. FREE SHIPPING WORLDWIDE. Delivered directly to your door by express mail!
Guaranteed AUTHENTIC & Includes CERTIFICATE OF AUTHENTICITY.
ancestryguns
$2250
#20213
SOLD
Antique: Yes
Description:
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver
Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Here we present an antique Merwin, Hulbert & Co. Large Frame “Open Top” Army Caliber Single Action Revolver, made circa 1876-1878 in Norwich, Connecticut. These were made by Hopkins & Allen for Merwin, Hulbert & Co. Only several thousand are thought to have been produced. These revolvers are considered today to be some of the best made of the late 19th Century and the Wild West, even better to some than similar Colts and Smith & Wessons, though we all know who stood the test of time. These revolvers certainly tended to have different, very well-thought features than their competition, and they were extremely well-made.
One such feature was the method of ejection. Loading was achieved by placing the hammer at half-cock and sliding down the loading gate to single feed cartridges. If one wanted to unload the gun, they could simply push the latch back on the bottom of the gun, twist the barrel and cylinder assembly and pull forward. Only the empty brass would come out as the space created was shorter than a loaded cartridge, enabling the shooter to top of his gun and keep rounds available. An ingenious method was designed to achieve this that included a machined cut on the cylinder axis pin and a ledge on the breech face that kept the cartridge rims underneath. This system was also advantageous for forcefully removing stuck cartridges, providing lots of mechanical advantage.
The overall condition is good. The action functions, and the cylinder indexes to the next chamber though lockup is weak (probably needs a new cylinder bolt spring). Good bore with strong rifling. The walnut grips are solid and remain in good shape.
Own the original! This is a legitimate antique and not a reproduction.
Barrel is 4-3/4 inches.
Caliber: .44 M&H (Merwin & Hulbert)
Overall condition as seen in photos.
Very Fast. Very Safe. FREE SHIPPING WORLDWIDE. Delivered directly to your door by express mail!
Guaranteed AUTHENTIC & Includes CERTIFICATE OF AUTHENTICITY.
ancestryguns
$2250
#20213
SOLD
Antique: Yes
Guns International #: 101420412
Seller's Inventory #: 20213
Guns International #: 101420412
Seller's Inventory #: 20213
Category - Merwin & Hulbert Revolvers
- Antique Revolvers - Cartridge
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: AncestryGunsLLC
Company: Ancestry Guns LLC
Company: Ancestry Guns LLC
Member Since: 11/3/16
State:
Missouri
Zip: 65203
Country: United States
Phone:
(314) 707-7373
Int'l Phone:
314-707-7373
Platinum Seller
Active Listings: 1052
Total Listings: 42339
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Credit Card, Certified Check, Money Order
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Description:
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver
Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Here we present an antique Merwin, Hulbert & Co. Large Frame “Open Top” Army Caliber Single Action Revolver, made circa 1876-1878 in Norwich, Connecticut. These were made by Hopkins & Allen for Merwin, Hulbert & Co. Only several thousand are thought to have been produced. These revolvers are considered today to be some of the best made of the late 19th Century and the Wild West, even better to some than similar Colts and Smith & Wessons, though we all know who stood the test of time. These revolvers certainly tended to have different, very well-thought features than their competition, and they were extremely well-made.
One such feature was the method of ejection. Loading was achieved by placing the hammer at half-cock and sliding down the loading gate to single feed cartridges. If one wanted to unload the gun, they could simply push the latch back on the bottom of the gun, twist the barrel and cylinder assembly and pull forward. Only the empty brass would come out as the space created was shorter than a loaded cartridge, enabling the shooter to top of his gun and keep rounds available. An ingenious method was designed to achieve this that included a machined cut on the cylinder axis pin and a ledge on the breech face that kept the cartridge rims underneath. This system was also advantageous for forcefully removing stuck cartridges, providing lots of mechanical advantage.
The overall condition is good. The action functions, and the cylinder indexes to the next chamber though lockup is weak (probably needs a new cylinder bolt spring). Good bore with strong rifling. The walnut grips are solid and remain in good shape.
Own the original! This is a legitimate antique and not a reproduction.
Barrel is 4-3/4 inches.
Caliber: .44 M&H (Merwin & Hulbert)
Overall condition as seen in photos.
Very Fast. Very Safe. FREE SHIPPING WORLDWIDE. Delivered directly to your door by express mail!
Guaranteed AUTHENTIC & Includes CERTIFICATE OF AUTHENTICITY.
ancestryguns
$2250
#20213
SOLD
Antique: Yes
Description:
.44 M&H MERWIN & HULBERT Antique Open Top “ARMY” Single Action Revolver
Full-Sized Late 1870s Revolver in Merwin & Hulbert’s Proprietary .44!
Here we present an antique Merwin, Hulbert & Co. Large Frame “Open Top” Army Caliber Single Action Revolver, made circa 1876-1878 in Norwich, Connecticut. These were made by Hopkins & Allen for Merwin, Hulbert & Co. Only several thousand are thought to have been produced. These revolvers are considered today to be some of the best made of the late 19th Century and the Wild West, even better to some than similar Colts and Smith & Wessons, though we all know who stood the test of time. These revolvers certainly tended to have different, very well-thought features than their competition, and they were extremely well-made.
One such feature was the method of ejection. Loading was achieved by placing the hammer at half-cock and sliding down the loading gate to single feed cartridges. If one wanted to unload the gun, they could simply push the latch back on the bottom of the gun, twist the barrel and cylinder assembly and pull forward. Only the empty brass would come out as the space created was shorter than a loaded cartridge, enabling the shooter to top of his gun and keep rounds available. An ingenious method was designed to achieve this that included a machined cut on the cylinder axis pin and a ledge on the breech face that kept the cartridge rims underneath. This system was also advantageous for forcefully removing stuck cartridges, providing lots of mechanical advantage.
The overall condition is good. The action functions, and the cylinder indexes to the next chamber though lockup is weak (probably needs a new cylinder bolt spring). Good bore with strong rifling. The walnut grips are solid and remain in good shape.
Own the original! This is a legitimate antique and not a reproduction.
Barrel is 4-3/4 inches.
Caliber: .44 M&H (Merwin & Hulbert)
Overall condition as seen in photos.
Very Fast. Very Safe. FREE SHIPPING WORLDWIDE. Delivered directly to your door by express mail!
Guaranteed AUTHENTIC & Includes CERTIFICATE OF AUTHENTICITY.
ancestryguns
$2250
#20213
SOLD
Antique: Yes
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww2
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww2
Guns International.com | V4.1 ww2