Ruger New Model Super Blackhawk .44 magnum caliber single action revolver
Description:
SOLD ****** Pending receipt of funds ******* Ruger New Model Super Blackhawk .44 magnum caliber single action revolver. 7.5 inch barrel, blue finish, 6 shot, square back trigger guard, unfluted cylinder, adjustable rear sight, ramp front sight, square butt. Includes very desireable Poly Choke brand raised, ventilated rib installed on top of the barrel. The rib can be used to mount a scope to the gun. None of the other similar guns currently advertised on this site have the ventilated rib. Grips are after-market plastic faux ivory made by the Jay Scott custom gun grip company. The plastic grip is laminated to a thin mahogany backer. This was done to prevent the plastic from cracking. Includes original box and guarantee paper for these Jay Scott grips. A second set of after-market custom made checkered walnut grips is available for an additional $65. The walnut grips are not included in the price of the gun. Includes original red gun box with correct box end label and papers. Production started in 1973. SN = 81-73840. This gun was made during 1976.
1974 production start 81-12401 - 81-32450
1975 production start 81-32451 - 81-61050
1976 production start 81-61051 - 81-93200
Overall excellent condition. Minor holster wear on left side of barrel near the muzzle and edge of cylinder next to forcing cone. Light drag line on the cylinder. Left side plastic grip has light scratches. No cracks in plastic grips. Wood grips are like new.
The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.
In the early 1950s, Westerns were popular in movies and television. Colt had discontinued the iconic Single Action Army prior to World War II, and few single-action revolvers were available to meet market demand for cowboy-style revolvers. In 1953, the new firm of Sturm, Ruger & Company introduced the Single-Six, a .22 long rifle rimfire single-action revolver. The Single-Six proved to be a popular seller, leading Ruger to develop and market a centerfire revolver similar to the Single Action Army: the Ruger Blackhawk. The Ruger Blackhawk was named after the Stutz Blackhawk automobile. Ruger introduced the Blackhawk in 1955. Chambered for the .357 Magnum, the Blackhawk was a simple and strong design, and it sold well. In 1956, as Smith & Wesson was introducing the new .44 Magnum, Ruger quickly developed a variant of the Blackhawk in the new cartridge. Ruger achieved wide popularity with this firearm in a hotly anticipated new cartridge, which was both cheaper and more readily available than the Smith & Wesson Model 29 revolver. According to popular legend, Ruger was able to field a .44 Magnum revolver at nearly the same time as Smith & Wesson due to a Ruger employee finding expended .44 Magnum cartridge cases at a scrapyard and deducing that Smith & Wesson was about to launch a new cartridge.
The 1955 –1962 Blackhawks are known today as the "Flattop" models, because their adjustable rear sights were not protected by "ears" extending up from the frame as later became standard. From 1962 through 1972, Ruger made the "Three Screw" Blackhawk in various calibers, so called by the number of screws visible on the side of the revolver.
The Flattop and Three Screw Rugers were modernized compared to the Colt Single Action Army, in that they had adjustable sights instead of the Colt's fixed sights, and they used wire coil springs instead of the Colt's flat leaf springs. Bill Ruger chose coil springs due to their greater durability, saying that it solved one of the primary weaknesses of the Colt design.
The early models of the Blackhawk still operated the same way as the Colt, in that the hammer was half-cocked to load and unload and that the firearm was not safe to carry with all six chambers loaded due to the hammer resting upon the sixth chamber. In 1973, in order to eliminate accidents occurring from the hammer jarring against a round loaded in the sixth chamber, Ruger introduced the New Model Blackhawk. The New Model Blackhawk did not require the hammer to be half-cocked for loading and unloading, and it employed a transfer bar mechanism which prevented the cartridge under the hammer from being fired without the trigger being pulled. The New Model Blackhawk was seen as limiting firearms accidents and legal liability. It is worth noting that the Super Blackhawk is capable of operating with much higher pressure handloads than factory produced ammunition in .44 Magnum. Factory produced loads, such as Federal Champion 240 gr JSP loads are right around 800 ft-lbs muzzle energy. Loads in excess of 1200 ft-lbs muzzle energy are commonly produced by handloaders for this caliber and the Super Blackhawk can, in fact, handle more powerful loads than any .44 Magnum lever action rifle and substantially more powerful rounds than any double action .44 Magnum revolver.
These facts make the Ruger Super Blackhawk one of the top choices for handgun hunting. It is capable of reliably taking down deer, elk, caribou, moose, lion, grizzly or brown bear and even cape buffalo. It is commonly used to deliver a coup de grace shot to mortally wounded large game, having the ability to dispatch even an elephant with a conscientiously placed close range shot to the head. The wide availability of .44 Magnum cases and bullets make the .44 Magnum chambering far more practical than .454 Casull or .480 Ruger, while allowing for similar ballistics in custom loadings.
The Ruger Super Blackhawk in .44 Magnum is one of the most accurate big bore pistols for target shooting, typically returning 5 shot groups that are one ragged hole from a rest at 25 yards.
New Model Super Blackhawk: Produced in blued and stainless, with or without a rib for mounting a scope. The Super Blackhawk is built on the same frame, but with a larger grip (in the 7.5" and 10.5" barrels) and unfluted cylinder (except for 5.5" barrel), in order to more effectively deal with the .44 Magnum's recoil. Also, the grip frames are made of steel, versus aluminium for those same components in the Blackhawk.
Shipping to your FFL only. Inspection must be done on the premises of the receiving FFL only. Do not remove firearm from receiving FFL before inspection is completed and firearm is accepted. We provide a 3 day window to complete reasonable inspection. Inspection starts on date of delivery to receiving FFL. Do not disassemble. If you are unsatisfied, do not complete transfer. Promptly return item using original packaging. We do not refund shipping cost from the seller to the buyer. We also do not reimburse return shipping cost. Add shipping cost of $35.
SOLD
Handgun Caliber: .44 Remington Magnum