to Favorites
1 of 14
2 of 14
3 of 14
4 of 14
5 of 14
6 of 14
7 of 14
8 of 14
9 of 14
10 of 14
11 of 14
12 of 14
13 of 14
14 of 14
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Excellent Antique Smith & Wesson Double Action "Frontier Model" 44-40 Caliber. Excellent Like New Mechanics With Original Holster...
Excellent Antique Smith & Wesson Double Action "Frontier Model" 44-40 Caliber. Excellent Like New Mechanics With Original Holster...
Click Photo to Enlarge
Guns International #: 101754797
Seller's Inventory #: 439
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Tom Boyer
Member Since: 1/2/10
First Name: Tom
Last Name: Boyer
State:
Indiana
Zip: 47359
Country: United States
Phone:
(765) 728-8049
Premium Seller
Active Listings: 8
Total Listings: 530
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: Cashiers check, Money orders, Personal checks.
Excellent Antique Smith & Wesson Double Action "Frontier Model" 44-40 Caliber. Excellent Like New Mechanics With Original Holster...
Description:
SOLD...REDUCED PRICE.. !!! Very fine antique Smith & Wesson double action “Frontier” revolver with standard 6 1/2” barrel and it's original full flap holster as you can see... Here is a real nice example of the Smith & Wesson Frontier model . These were made in the more desirable and rather harder to find. 44-40 caliber. They were made in their own S/N range from 1 to 54668. Made from 1886 to 1913.. This one is S/N 11708 and all matching of course on the butt, barrel, barrel latch and cylinder... The right grip is also scratch numbered as is correct... All of these large frame S&W revolvers frames were manufactured before 1898 so all are considered antique and require no FFL.. Regardless, this one falls into the pre 1898 as it still has the early pre 1900 two line address and does not have the .44 Winchester Ctr. as the later ones did.. The mechanics are excellent.. Crisp and tight as a new gun in double and single action. The cylinder has no front to rear or side to side wobble. It locks up with no cylinder movement at all.. Rock solid barrel to frame fit at the latch and the hinge with no movement.. all tight as the day it left the factory.. The gun is in very fine condition with 70% original nickel finish.. I will break it down for you part by part.. The barrel has 40% to 50%.. The cylinder has 70% to 75%. The frame has 80% including the front and rear grip straps.. The balance were the nickel is missing is a very pleasing medium brown patina and shows no cleaning or being messed with.. Just the way you love to find these nickel plated guns.. Markings are excellent.. The hammer has 95% bright vivid case colors.. The trigger has about the same amount on the sides but is very slightly fading but still semi bright and vivid.. The barrel latch blue has faded to brown patina with just trace of blue on the bottom were protected.. The blue on the trigger guard has faded to a dull blue brown color with some bright blue in the protected areas.. The bore is near excellent with some shine and with strong and deep rifling.. The cylinder chambers are very fine with some very minor surface crud that I am quite sure will clean to excellent.. NO pitting in the bore or chambers. The grips are excellent.. Still show all their fine checkering showing very little wear.. A perfect snap on factory fit and numbered to the gun as mentioned. NO chips or cracks.. The screw heads are excellent and show very little turning if any at all.. Take down pins show no peck marks.. The HOLSTER is in excellent condition.. Medium weight leather and absolutely dates to the period use of the revolver.. Late 1880's to 1900 or so.. No rips or tears and all the original stitching is tight and intact.. Still retains about 80% of the original polish finish with no crazing. Belt loop is solid and secure on the back..Some simple rolled tooling around the border as you can see.. It is made for this exact revolver and it fits like a glove.. It is marked on the belt loop 174, probably the catalog number, and S&W DA 44 61/2.. so no guessing here on what gun it was made to fit.. This is a really nice, honest and affordable set here. Don't miss it.. $30 insured shipping.. Call 765-728-8049 with any questions or more photos. Thank you for looking and check back often..
SOLD
Antique: Yes
Description:
SOLD...REDUCED PRICE.. !!! Very fine antique Smith & Wesson double action “Frontier” revolver with standard 6 1/2” barrel and it's original full flap holster as you can see... Here is a real nice example of the Smith & Wesson Frontier model . These were made in the more desirable and rather harder to find. 44-40 caliber. They were made in their own S/N range from 1 to 54668. Made from 1886 to 1913.. This one is S/N 11708 and all matching of course on the butt, barrel, barrel latch and cylinder... The right grip is also scratch numbered as is correct... All of these large frame S&W revolvers frames were manufactured before 1898 so all are considered antique and require no FFL.. Regardless, this one falls into the pre 1898 as it still has the early pre 1900 two line address and does not have the .44 Winchester Ctr. as the later ones did.. The mechanics are excellent.. Crisp and tight as a new gun in double and single action. The cylinder has no front to rear or side to side wobble. It locks up with no cylinder movement at all.. Rock solid barrel to frame fit at the latch and the hinge with no movement.. all tight as the day it left the factory.. The gun is in very fine condition with 70% original nickel finish.. I will break it down for you part by part.. The barrel has 40% to 50%.. The cylinder has 70% to 75%. The frame has 80% including the front and rear grip straps.. The balance were the nickel is missing is a very pleasing medium brown patina and shows no cleaning or being messed with.. Just the way you love to find these nickel plated guns.. Markings are excellent.. The hammer has 95% bright vivid case colors.. The trigger has about the same amount on the sides but is very slightly fading but still semi bright and vivid.. The barrel latch blue has faded to brown patina with just trace of blue on the bottom were protected.. The blue on the trigger guard has faded to a dull blue brown color with some bright blue in the protected areas.. The bore is near excellent with some shine and with strong and deep rifling.. The cylinder chambers are very fine with some very minor surface crud that I am quite sure will clean to excellent.. NO pitting in the bore or chambers. The grips are excellent.. Still show all their fine checkering showing very little wear.. A perfect snap on factory fit and numbered to the gun as mentioned. NO chips or cracks.. The screw heads are excellent and show very little turning if any at all.. Take down pins show no peck marks.. The HOLSTER is in excellent condition.. Medium weight leather and absolutely dates to the period use of the revolver.. Late 1880's to 1900 or so.. No rips or tears and all the original stitching is tight and intact.. Still retains about 80% of the original polish finish with no crazing. Belt loop is solid and secure on the back..Some simple rolled tooling around the border as you can see.. It is made for this exact revolver and it fits like a glove.. It is marked on the belt loop 174, probably the catalog number, and S&W DA 44 61/2.. so no guessing here on what gun it was made to fit.. This is a really nice, honest and affordable set here. Don't miss it.. $30 insured shipping.. Call 765-728-8049 with any questions or more photos. Thank you for looking and check back often..
SOLD
Antique: Yes
|
Click Photo to Enlarge
|
Guns International #: 101754797
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Tom Boyer
Member Since: 1/2/10
First Name: Tom
Last Name: Boyer
State:
Indiana
Zip: 47359
Country: United States
Phone:
(765) 728-8049
Premium Seller
Active Listings: 8
Total Listings: 530
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days Payment Methods: Cashiers check, Money orders, Personal checks.
Excellent Antique Smith & Wesson Double Action "Frontier Model" 44-40 Caliber. Excellent Like New Mechanics With Original Holster...
Description: SOLD...REDUCED PRICE.. !!! Very fine antique Smith & Wesson double action “Frontier” revolver with standard 6 1/2” barrel and it's original full flap holster as you can see... Here is a real nice example of the Smith & Wesson Frontier model . These were made in the more desirable and rather harder to find. 44-40 caliber. They were made in their own S/N range from 1 to 54668. Made from 1886 to 1913.. This one is S/N 11708 and all matching of course on the butt, barrel, barrel latch and cylinder... The right grip is also scratch numbered as is correct... All of these large frame S&W revolvers frames were manufactured before 1898 so all are considered antique and require no FFL.. Regardless, this one falls into the pre 1898 as it still has the early pre 1900 two line address and does not have the .44 Winchester Ctr. as the later ones did.. The mechanics are excellent.. Crisp and tight as a new gun in double and single action. The cylinder has no front to rear or side to side wobble. It locks up with no cylinder movement at all.. Rock solid barrel to frame fit at the latch and the hinge with no movement.. all tight as the day it left the factory.. The gun is in very fine condition with 70% original nickel finish.. I will break it down for you part by part.. The barrel has 40% to 50%.. The cylinder has 70% to 75%. The frame has 80% including the front and rear grip straps.. The balance were the nickel is missing is a very pleasing medium brown patina and shows no cleaning or being messed with.. Just the way you love to find these nickel plated guns.. Markings are excellent.. The hammer has 95% bright vivid case colors.. The trigger has about the same amount on the sides but is very slightly fading but still semi bright and vivid.. The barrel latch blue has faded to brown patina with just trace of blue on the bottom were protected.. The blue on the trigger guard has faded to a dull blue brown color with some bright blue in the protected areas.. The bore is near excellent with some shine and with strong and deep rifling.. The cylinder chambers are very fine with some very minor surface crud that I am quite sure will clean to excellent.. NO pitting in the bore or chambers. The grips are excellent.. Still show all their fine checkering showing very little wear.. A perfect snap on factory fit and numbered to the gun as mentioned. NO chips or cracks.. The screw heads are excellent and show very little turning if any at all.. Take down pins show no peck marks.. The HOLSTER is in excellent condition.. Medium weight leather and absolutely dates to the period use of the revolver.. Late 1880's to 1900 or so.. No rips or tears and all the original stitching is tight and intact.. Still retains about 80% of the original polish finish with no crazing. Belt loop is solid and secure on the back..Some simple rolled tooling around the border as you can see.. It is made for this exact revolver and it fits like a glove.. It is marked on the belt loop 174, probably the catalog number, and S&W DA 44 61/2.. so no guessing here on what gun it was made to fit.. This is a really nice, honest and affordable set here. Don't miss it.. $30 insured shipping.. Call 765-728-8049 with any questions or more photos. Thank you for looking and check back often.. SOLD Antique: Yes |
Click Photo to Enlarge
Guns International #: 101754797
Seller's Inventory #: 439
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Tom Boyer
Member Since: 1/2/10
First Name: Tom
Last Name: Boyer
State:
Indiana
Zip: 47359
Country: United States
Phone:
(765) 728-8049
Premium Seller
Active Listings: 8
Total Listings: 530
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: Cashiers check, Money orders, Personal checks.
Excellent Antique Smith & Wesson Double Action "Frontier Model" 44-40 Caliber. Excellent Like New Mechanics With Original Holster...
Description:
SOLD...REDUCED PRICE.. !!! Very fine antique Smith & Wesson double action “Frontier” revolver with standard 6 1/2” barrel and it's original full flap holster as you can see... Here is a real nice example of the Smith & Wesson Frontier model . These were made in the more desirable and rather harder to find. 44-40 caliber. They were made in their own S/N range from 1 to 54668. Made from 1886 to 1913.. This one is S/N 11708 and all matching of course on the butt, barrel, barrel latch and cylinder... The right grip is also scratch numbered as is correct... All of these large frame S&W revolvers frames were manufactured before 1898 so all are considered antique and require no FFL.. Regardless, this one falls into the pre 1898 as it still has the early pre 1900 two line address and does not have the .44 Winchester Ctr. as the later ones did.. The mechanics are excellent.. Crisp and tight as a new gun in double and single action. The cylinder has no front to rear or side to side wobble. It locks up with no cylinder movement at all.. Rock solid barrel to frame fit at the latch and the hinge with no movement.. all tight as the day it left the factory.. The gun is in very fine condition with 70% original nickel finish.. I will break it down for you part by part.. The barrel has 40% to 50%.. The cylinder has 70% to 75%. The frame has 80% including the front and rear grip straps.. The balance were the nickel is missing is a very pleasing medium brown patina and shows no cleaning or being messed with.. Just the way you love to find these nickel plated guns.. Markings are excellent.. The hammer has 95% bright vivid case colors.. The trigger has about the same amount on the sides but is very slightly fading but still semi bright and vivid.. The barrel latch blue has faded to brown patina with just trace of blue on the bottom were protected.. The blue on the trigger guard has faded to a dull blue brown color with some bright blue in the protected areas.. The bore is near excellent with some shine and with strong and deep rifling.. The cylinder chambers are very fine with some very minor surface crud that I am quite sure will clean to excellent.. NO pitting in the bore or chambers. The grips are excellent.. Still show all their fine checkering showing very little wear.. A perfect snap on factory fit and numbered to the gun as mentioned. NO chips or cracks.. The screw heads are excellent and show very little turning if any at all.. Take down pins show no peck marks.. The HOLSTER is in excellent condition.. Medium weight leather and absolutely dates to the period use of the revolver.. Late 1880's to 1900 or so.. No rips or tears and all the original stitching is tight and intact.. Still retains about 80% of the original polish finish with no crazing. Belt loop is solid and secure on the back..Some simple rolled tooling around the border as you can see.. It is made for this exact revolver and it fits like a glove.. It is marked on the belt loop 174, probably the catalog number, and S&W DA 44 61/2.. so no guessing here on what gun it was made to fit.. This is a really nice, honest and affordable set here. Don't miss it.. $30 insured shipping.. Call 765-728-8049 with any questions or more photos. Thank you for looking and check back often..
SOLD
Antique: Yes
Description:
SOLD...REDUCED PRICE.. !!! Very fine antique Smith & Wesson double action “Frontier” revolver with standard 6 1/2” barrel and it's original full flap holster as you can see... Here is a real nice example of the Smith & Wesson Frontier model . These were made in the more desirable and rather harder to find. 44-40 caliber. They were made in their own S/N range from 1 to 54668. Made from 1886 to 1913.. This one is S/N 11708 and all matching of course on the butt, barrel, barrel latch and cylinder... The right grip is also scratch numbered as is correct... All of these large frame S&W revolvers frames were manufactured before 1898 so all are considered antique and require no FFL.. Regardless, this one falls into the pre 1898 as it still has the early pre 1900 two line address and does not have the .44 Winchester Ctr. as the later ones did.. The mechanics are excellent.. Crisp and tight as a new gun in double and single action. The cylinder has no front to rear or side to side wobble. It locks up with no cylinder movement at all.. Rock solid barrel to frame fit at the latch and the hinge with no movement.. all tight as the day it left the factory.. The gun is in very fine condition with 70% original nickel finish.. I will break it down for you part by part.. The barrel has 40% to 50%.. The cylinder has 70% to 75%. The frame has 80% including the front and rear grip straps.. The balance were the nickel is missing is a very pleasing medium brown patina and shows no cleaning or being messed with.. Just the way you love to find these nickel plated guns.. Markings are excellent.. The hammer has 95% bright vivid case colors.. The trigger has about the same amount on the sides but is very slightly fading but still semi bright and vivid.. The barrel latch blue has faded to brown patina with just trace of blue on the bottom were protected.. The blue on the trigger guard has faded to a dull blue brown color with some bright blue in the protected areas.. The bore is near excellent with some shine and with strong and deep rifling.. The cylinder chambers are very fine with some very minor surface crud that I am quite sure will clean to excellent.. NO pitting in the bore or chambers. The grips are excellent.. Still show all their fine checkering showing very little wear.. A perfect snap on factory fit and numbered to the gun as mentioned. NO chips or cracks.. The screw heads are excellent and show very little turning if any at all.. Take down pins show no peck marks.. The HOLSTER is in excellent condition.. Medium weight leather and absolutely dates to the period use of the revolver.. Late 1880's to 1900 or so.. No rips or tears and all the original stitching is tight and intact.. Still retains about 80% of the original polish finish with no crazing. Belt loop is solid and secure on the back..Some simple rolled tooling around the border as you can see.. It is made for this exact revolver and it fits like a glove.. It is marked on the belt loop 174, probably the catalog number, and S&W DA 44 61/2.. so no guessing here on what gun it was made to fit.. This is a really nice, honest and affordable set here. Don't miss it.. $30 insured shipping.. Call 765-728-8049 with any questions or more photos. Thank you for looking and check back often..
SOLD
Antique: Yes
Guns International #: 101754797
Seller's Inventory #: 439
Guns International #: 101754797
Seller's Inventory #: 439
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Tom Boyer
Member Since: 1/2/10
First Name: Tom
Last Name: Boyer
State:
Indiana
Zip: 47359
Country: United States
Phone:
(765) 728-8049
Premium Seller
Active Listings: 8
Total Listings: 530
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: Cashiers check, Money orders, Personal checks.
Excellent Antique Smith & Wesson Double Action "Frontier Model" 44-40 Caliber. Excellent Like New Mechanics With Original Holster...
Description:
SOLD...REDUCED PRICE.. !!! Very fine antique Smith & Wesson double action “Frontier” revolver with standard 6 1/2” barrel and it's original full flap holster as you can see... Here is a real nice example of the Smith & Wesson Frontier model . These were made in the more desirable and rather harder to find. 44-40 caliber. They were made in their own S/N range from 1 to 54668. Made from 1886 to 1913.. This one is S/N 11708 and all matching of course on the butt, barrel, barrel latch and cylinder... The right grip is also scratch numbered as is correct... All of these large frame S&W revolvers frames were manufactured before 1898 so all are considered antique and require no FFL.. Regardless, this one falls into the pre 1898 as it still has the early pre 1900 two line address and does not have the .44 Winchester Ctr. as the later ones did.. The mechanics are excellent.. Crisp and tight as a new gun in double and single action. The cylinder has no front to rear or side to side wobble. It locks up with no cylinder movement at all.. Rock solid barrel to frame fit at the latch and the hinge with no movement.. all tight as the day it left the factory.. The gun is in very fine condition with 70% original nickel finish.. I will break it down for you part by part.. The barrel has 40% to 50%.. The cylinder has 70% to 75%. The frame has 80% including the front and rear grip straps.. The balance were the nickel is missing is a very pleasing medium brown patina and shows no cleaning or being messed with.. Just the way you love to find these nickel plated guns.. Markings are excellent.. The hammer has 95% bright vivid case colors.. The trigger has about the same amount on the sides but is very slightly fading but still semi bright and vivid.. The barrel latch blue has faded to brown patina with just trace of blue on the bottom were protected.. The blue on the trigger guard has faded to a dull blue brown color with some bright blue in the protected areas.. The bore is near excellent with some shine and with strong and deep rifling.. The cylinder chambers are very fine with some very minor surface crud that I am quite sure will clean to excellent.. NO pitting in the bore or chambers. The grips are excellent.. Still show all their fine checkering showing very little wear.. A perfect snap on factory fit and numbered to the gun as mentioned. NO chips or cracks.. The screw heads are excellent and show very little turning if any at all.. Take down pins show no peck marks.. The HOLSTER is in excellent condition.. Medium weight leather and absolutely dates to the period use of the revolver.. Late 1880's to 1900 or so.. No rips or tears and all the original stitching is tight and intact.. Still retains about 80% of the original polish finish with no crazing. Belt loop is solid and secure on the back..Some simple rolled tooling around the border as you can see.. It is made for this exact revolver and it fits like a glove.. It is marked on the belt loop 174, probably the catalog number, and S&W DA 44 61/2.. so no guessing here on what gun it was made to fit.. This is a really nice, honest and affordable set here. Don't miss it.. $30 insured shipping.. Call 765-728-8049 with any questions or more photos. Thank you for looking and check back often..
SOLD
Antique: Yes
Description:
SOLD...REDUCED PRICE.. !!! Very fine antique Smith & Wesson double action “Frontier” revolver with standard 6 1/2” barrel and it's original full flap holster as you can see... Here is a real nice example of the Smith & Wesson Frontier model . These were made in the more desirable and rather harder to find. 44-40 caliber. They were made in their own S/N range from 1 to 54668. Made from 1886 to 1913.. This one is S/N 11708 and all matching of course on the butt, barrel, barrel latch and cylinder... The right grip is also scratch numbered as is correct... All of these large frame S&W revolvers frames were manufactured before 1898 so all are considered antique and require no FFL.. Regardless, this one falls into the pre 1898 as it still has the early pre 1900 two line address and does not have the .44 Winchester Ctr. as the later ones did.. The mechanics are excellent.. Crisp and tight as a new gun in double and single action. The cylinder has no front to rear or side to side wobble. It locks up with no cylinder movement at all.. Rock solid barrel to frame fit at the latch and the hinge with no movement.. all tight as the day it left the factory.. The gun is in very fine condition with 70% original nickel finish.. I will break it down for you part by part.. The barrel has 40% to 50%.. The cylinder has 70% to 75%. The frame has 80% including the front and rear grip straps.. The balance were the nickel is missing is a very pleasing medium brown patina and shows no cleaning or being messed with.. Just the way you love to find these nickel plated guns.. Markings are excellent.. The hammer has 95% bright vivid case colors.. The trigger has about the same amount on the sides but is very slightly fading but still semi bright and vivid.. The barrel latch blue has faded to brown patina with just trace of blue on the bottom were protected.. The blue on the trigger guard has faded to a dull blue brown color with some bright blue in the protected areas.. The bore is near excellent with some shine and with strong and deep rifling.. The cylinder chambers are very fine with some very minor surface crud that I am quite sure will clean to excellent.. NO pitting in the bore or chambers. The grips are excellent.. Still show all their fine checkering showing very little wear.. A perfect snap on factory fit and numbered to the gun as mentioned. NO chips or cracks.. The screw heads are excellent and show very little turning if any at all.. Take down pins show no peck marks.. The HOLSTER is in excellent condition.. Medium weight leather and absolutely dates to the period use of the revolver.. Late 1880's to 1900 or so.. No rips or tears and all the original stitching is tight and intact.. Still retains about 80% of the original polish finish with no crazing. Belt loop is solid and secure on the back..Some simple rolled tooling around the border as you can see.. It is made for this exact revolver and it fits like a glove.. It is marked on the belt loop 174, probably the catalog number, and S&W DA 44 61/2.. so no guessing here on what gun it was made to fit.. This is a really nice, honest and affordable set here. Don't miss it.. $30 insured shipping.. Call 765-728-8049 with any questions or more photos. Thank you for looking and check back often..
SOLD
Antique: Yes
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3