to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
S&W "Double Action Frontier" Model, 44/40...1883 for sale
S&W "Double Action Frontier" Model, 44/40...1883 for sale
Click Photo to Enlarge
Guns International #: 103381214
Seller's Inventory #: 7338
S&W "Double Action Frontier" Model, 44/40...1883
Description:
S&W "DOUBLE ACTION FRONTIER" MODEL, 44/40...1883 This Model showed the intent of S&W to be part of the American scheme of things on the Frontier. This Double Action Model was originally introduced a few years earlier, but in .44 Russian caliber, which had been the bread and butter caliber of S&W.
D. B. Wesson began to conceive the idea of what Colt had already discovered, a companion piece to the Winchester in 44/40, one cartridge, two weapons ! The frame was lengthened, and the cylinder lengthened to 1-9/16 inch, versus the old length of 1-7/16 of an inch. Thus, the Double Action Frontier Model was born, and marketed. It was relatively popular, and a much more "hefty" sturdy revolver as compared to competition. A six shot, firing the 44/40 cartridge. Even so, it was a relatively limited production of only about 15,000 in their own serial range. This DA Frontier, Serial No. 3396 would have been manufactured approximately in 1883. It has 98% of all the original factory nickel plating, and 95% of all the fire blue is present on the trigger guard and top strap latch. The case coloring on the hammer and trigger is present, and distinctly bright and visible. The mechanical action is perfect, both on single action and double action firing modes. The break open and eject and load mode is also perfect in every aspect. ALL factory applied markings, barrel address etc.. are clear and distinctly present. This specimen has the very rare factory 6 1/2 inch barrel, and checkered hard rubber grips with S&W monogram. The Grips show the wear of 100+ years of use, the checkering is warn smooth and the S&W monogram is faded, but they are in great shape with no cracks or brakes. An excellent addition to any large frame collection, and S&W's finest DA revolver of the Frontier Period.
This is an ANTIQUE and can be shipped directly to you in the USA or INTERNATIONALLY. (adult signature required) Sold as an Antique ~ no guarantees, warranties, or liabilities for any actual usage. If any firearms are to be used for shooting purposes, a qualified gunsmith should inspect them first.
We qualify some of our items as eligible for our LAYAWAY PROGRAM. We accept Bank Check, Money order, Personal checks or wire transfer.
Items over $1000.00 can layaway at 1/3 down and 1/3 in 30 days and balance in the following 30 days. No discount is offered on layaway items. We are open to offers at any other time.
Price: $4,695.00
Buy Now
Description:
S&W "DOUBLE ACTION FRONTIER" MODEL, 44/40...1883 This Model showed the intent of S&W to be part of the American scheme of things on the Frontier. This Double Action Model was originally introduced a few years earlier, but in .44 Russian caliber, which had been the bread and butter caliber of S&W.
D. B. Wesson began to conceive the idea of what Colt had already discovered, a companion piece to the Winchester in 44/40, one cartridge, two weapons ! The frame was lengthened, and the cylinder lengthened to 1-9/16 inch, versus the old length of 1-7/16 of an inch. Thus, the Double Action Frontier Model was born, and marketed. It was relatively popular, and a much more "hefty" sturdy revolver as compared to competition. A six shot, firing the 44/40 cartridge. Even so, it was a relatively limited production of only about 15,000 in their own serial range. This DA Frontier, Serial No. 3396 would have been manufactured approximately in 1883. It has 98% of all the original factory nickel plating, and 95% of all the fire blue is present on the trigger guard and top strap latch. The case coloring on the hammer and trigger is present, and distinctly bright and visible. The mechanical action is perfect, both on single action and double action firing modes. The break open and eject and load mode is also perfect in every aspect. ALL factory applied markings, barrel address etc.. are clear and distinctly present. This specimen has the very rare factory 6 1/2 inch barrel, and checkered hard rubber grips with S&W monogram. The Grips show the wear of 100+ years of use, the checkering is warn smooth and the S&W monogram is faded, but they are in great shape with no cracks or brakes. An excellent addition to any large frame collection, and S&W's finest DA revolver of the Frontier Period.
This is an ANTIQUE and can be shipped directly to you in the USA or INTERNATIONALLY. (adult signature required) Sold as an Antique ~ no guarantees, warranties, or liabilities for any actual usage. If any firearms are to be used for shooting purposes, a qualified gunsmith should inspect them first.
We qualify some of our items as eligible for our LAYAWAY PROGRAM. We accept Bank Check, Money order, Personal checks or wire transfer.
Items over $1000.00 can layaway at 1/3 down and 1/3 in 30 days and balance in the following 30 days. No discount is offered on layaway items. We are open to offers at any other time.
Price: $4,695.00
Buy Now
Contact Seller
|
Click Photo to Enlarge
|
Guns International #: 103381214
S&W "Double Action Frontier" Model, 44/40...1883
Description: S&W "DOUBLE ACTION FRONTIER" MODEL, 44/40...1883 This Model showed the intent of S&W to be part of the American scheme of things on the Frontier. This Double Action Model was originally introduced a few years earlier, but in .44 Russian caliber, which had been the bread and butter caliber of S&W. D. B. Wesson began to conceive the idea of what Colt had already discovered, a companion piece to the Winchester in 44/40, one cartridge, two weapons ! The frame was lengthened, and the cylinder lengthened to 1-9/16 inch, versus the old length of 1-7/16 of an inch. Thus, the Double Action Frontier Model was born, and marketed. It was relatively popular, and a much more "hefty" sturdy revolver as compared to competition. A six shot, firing the 44/40 cartridge. Even so, it was a relatively limited production of only about 15,000 in their own serial range. This DA Frontier, Serial No. 3396 would have been manufactured approximately in 1883. It has 98% of all the original factory nickel plating, and 95% of all the fire blue is present on the trigger guard and top strap latch. The case coloring on the hammer and trigger is present, and distinctly bright and visible. The mechanical action is perfect, both on single action and double action firing modes. The break open and eject and load mode is also perfect in every aspect. ALL factory applied markings, barrel address etc.. are clear and distinctly present. This specimen has the very rare factory 6 1/2 inch barrel, and checkered hard rubber grips with S&W monogram. The Grips show the wear of 100+ years of use, the checkering is warn smooth and the S&W monogram is faded, but they are in great shape with no cracks or brakes. An excellent addition to any large frame collection, and S&W's finest DA revolver of the Frontier Period. This is an ANTIQUE and can be shipped directly to you in the USA or INTERNATIONALLY. (adult signature required) Sold as an Antique ~ no guarantees, warranties, or liabilities for any actual usage. If any firearms are to be used for shooting purposes, a qualified gunsmith should inspect them first. We qualify some of our items as eligible for our LAYAWAY PROGRAM. We accept Bank Check, Money order, Personal checks or wire transfer. Items over $1000.00 can layaway at 1/3 down and 1/3 in 30 days and balance in the following 30 days. No discount is offered on layaway items. We are open to offers at any other time. Price: $4,695.00 Buy Now Contact Seller |
Click Photo to Enlarge
Guns International #: 103381214
Seller's Inventory #: 7338
S&W "Double Action Frontier" Model, 44/40...1883
Description:
S&W "DOUBLE ACTION FRONTIER" MODEL, 44/40...1883 This Model showed the intent of S&W to be part of the American scheme of things on the Frontier. This Double Action Model was originally introduced a few years earlier, but in .44 Russian caliber, which had been the bread and butter caliber of S&W.
D. B. Wesson began to conceive the idea of what Colt had already discovered, a companion piece to the Winchester in 44/40, one cartridge, two weapons ! The frame was lengthened, and the cylinder lengthened to 1-9/16 inch, versus the old length of 1-7/16 of an inch. Thus, the Double Action Frontier Model was born, and marketed. It was relatively popular, and a much more "hefty" sturdy revolver as compared to competition. A six shot, firing the 44/40 cartridge. Even so, it was a relatively limited production of only about 15,000 in their own serial range. This DA Frontier, Serial No. 3396 would have been manufactured approximately in 1883. It has 98% of all the original factory nickel plating, and 95% of all the fire blue is present on the trigger guard and top strap latch. The case coloring on the hammer and trigger is present, and distinctly bright and visible. The mechanical action is perfect, both on single action and double action firing modes. The break open and eject and load mode is also perfect in every aspect. ALL factory applied markings, barrel address etc.. are clear and distinctly present. This specimen has the very rare factory 6 1/2 inch barrel, and checkered hard rubber grips with S&W monogram. The Grips show the wear of 100+ years of use, the checkering is warn smooth and the S&W monogram is faded, but they are in great shape with no cracks or brakes. An excellent addition to any large frame collection, and S&W's finest DA revolver of the Frontier Period.
This is an ANTIQUE and can be shipped directly to you in the USA or INTERNATIONALLY. (adult signature required) Sold as an Antique ~ no guarantees, warranties, or liabilities for any actual usage. If any firearms are to be used for shooting purposes, a qualified gunsmith should inspect them first.
We qualify some of our items as eligible for our LAYAWAY PROGRAM. We accept Bank Check, Money order, Personal checks or wire transfer.
Items over $1000.00 can layaway at 1/3 down and 1/3 in 30 days and balance in the following 30 days. No discount is offered on layaway items. We are open to offers at any other time.
Price: $4,695.00
Buy Now
Description:
S&W "DOUBLE ACTION FRONTIER" MODEL, 44/40...1883 This Model showed the intent of S&W to be part of the American scheme of things on the Frontier. This Double Action Model was originally introduced a few years earlier, but in .44 Russian caliber, which had been the bread and butter caliber of S&W.
D. B. Wesson began to conceive the idea of what Colt had already discovered, a companion piece to the Winchester in 44/40, one cartridge, two weapons ! The frame was lengthened, and the cylinder lengthened to 1-9/16 inch, versus the old length of 1-7/16 of an inch. Thus, the Double Action Frontier Model was born, and marketed. It was relatively popular, and a much more "hefty" sturdy revolver as compared to competition. A six shot, firing the 44/40 cartridge. Even so, it was a relatively limited production of only about 15,000 in their own serial range. This DA Frontier, Serial No. 3396 would have been manufactured approximately in 1883. It has 98% of all the original factory nickel plating, and 95% of all the fire blue is present on the trigger guard and top strap latch. The case coloring on the hammer and trigger is present, and distinctly bright and visible. The mechanical action is perfect, both on single action and double action firing modes. The break open and eject and load mode is also perfect in every aspect. ALL factory applied markings, barrel address etc.. are clear and distinctly present. This specimen has the very rare factory 6 1/2 inch barrel, and checkered hard rubber grips with S&W monogram. The Grips show the wear of 100+ years of use, the checkering is warn smooth and the S&W monogram is faded, but they are in great shape with no cracks or brakes. An excellent addition to any large frame collection, and S&W's finest DA revolver of the Frontier Period.
This is an ANTIQUE and can be shipped directly to you in the USA or INTERNATIONALLY. (adult signature required) Sold as an Antique ~ no guarantees, warranties, or liabilities for any actual usage. If any firearms are to be used for shooting purposes, a qualified gunsmith should inspect them first.
We qualify some of our items as eligible for our LAYAWAY PROGRAM. We accept Bank Check, Money order, Personal checks or wire transfer.
Items over $1000.00 can layaway at 1/3 down and 1/3 in 30 days and balance in the following 30 days. No discount is offered on layaway items. We are open to offers at any other time.
Price: $4,695.00
Buy Now
Guns International #: 103381214
Seller's Inventory #: 7338
Guns International #: 103381214
Seller's Inventory #: 7338
S&W "Double Action Frontier" Model, 44/40...1883
Description:
S&W "DOUBLE ACTION FRONTIER" MODEL, 44/40...1883 This Model showed the intent of S&W to be part of the American scheme of things on the Frontier. This Double Action Model was originally introduced a few years earlier, but in .44 Russian caliber, which had been the bread and butter caliber of S&W.
D. B. Wesson began to conceive the idea of what Colt had already discovered, a companion piece to the Winchester in 44/40, one cartridge, two weapons ! The frame was lengthened, and the cylinder lengthened to 1-9/16 inch, versus the old length of 1-7/16 of an inch. Thus, the Double Action Frontier Model was born, and marketed. It was relatively popular, and a much more "hefty" sturdy revolver as compared to competition. A six shot, firing the 44/40 cartridge. Even so, it was a relatively limited production of only about 15,000 in their own serial range. This DA Frontier, Serial No. 3396 would have been manufactured approximately in 1883. It has 98% of all the original factory nickel plating, and 95% of all the fire blue is present on the trigger guard and top strap latch. The case coloring on the hammer and trigger is present, and distinctly bright and visible. The mechanical action is perfect, both on single action and double action firing modes. The break open and eject and load mode is also perfect in every aspect. ALL factory applied markings, barrel address etc.. are clear and distinctly present. This specimen has the very rare factory 6 1/2 inch barrel, and checkered hard rubber grips with S&W monogram. The Grips show the wear of 100+ years of use, the checkering is warn smooth and the S&W monogram is faded, but they are in great shape with no cracks or brakes. An excellent addition to any large frame collection, and S&W's finest DA revolver of the Frontier Period.
This is an ANTIQUE and can be shipped directly to you in the USA or INTERNATIONALLY. (adult signature required) Sold as an Antique ~ no guarantees, warranties, or liabilities for any actual usage. If any firearms are to be used for shooting purposes, a qualified gunsmith should inspect them first.
We qualify some of our items as eligible for our LAYAWAY PROGRAM. We accept Bank Check, Money order, Personal checks or wire transfer.
Items over $1000.00 can layaway at 1/3 down and 1/3 in 30 days and balance in the following 30 days. No discount is offered on layaway items. We are open to offers at any other time.
Price: $4,695.00
Buy Now
Description:
S&W "DOUBLE ACTION FRONTIER" MODEL, 44/40...1883 This Model showed the intent of S&W to be part of the American scheme of things on the Frontier. This Double Action Model was originally introduced a few years earlier, but in .44 Russian caliber, which had been the bread and butter caliber of S&W.
D. B. Wesson began to conceive the idea of what Colt had already discovered, a companion piece to the Winchester in 44/40, one cartridge, two weapons ! The frame was lengthened, and the cylinder lengthened to 1-9/16 inch, versus the old length of 1-7/16 of an inch. Thus, the Double Action Frontier Model was born, and marketed. It was relatively popular, and a much more "hefty" sturdy revolver as compared to competition. A six shot, firing the 44/40 cartridge. Even so, it was a relatively limited production of only about 15,000 in their own serial range. This DA Frontier, Serial No. 3396 would have been manufactured approximately in 1883. It has 98% of all the original factory nickel plating, and 95% of all the fire blue is present on the trigger guard and top strap latch. The case coloring on the hammer and trigger is present, and distinctly bright and visible. The mechanical action is perfect, both on single action and double action firing modes. The break open and eject and load mode is also perfect in every aspect. ALL factory applied markings, barrel address etc.. are clear and distinctly present. This specimen has the very rare factory 6 1/2 inch barrel, and checkered hard rubber grips with S&W monogram. The Grips show the wear of 100+ years of use, the checkering is warn smooth and the S&W monogram is faded, but they are in great shape with no cracks or brakes. An excellent addition to any large frame collection, and S&W's finest DA revolver of the Frontier Period.
This is an ANTIQUE and can be shipped directly to you in the USA or INTERNATIONALLY. (adult signature required) Sold as an Antique ~ no guarantees, warranties, or liabilities for any actual usage. If any firearms are to be used for shooting purposes, a qualified gunsmith should inspect them first.
We qualify some of our items as eligible for our LAYAWAY PROGRAM. We accept Bank Check, Money order, Personal checks or wire transfer.
Items over $1000.00 can layaway at 1/3 down and 1/3 in 30 days and balance in the following 30 days. No discount is offered on layaway items. We are open to offers at any other time.
Price: $4,695.00
Buy Now
Contact Seller
Buy Now
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3