to Favorites
1 of 14
2 of 14
3 of 14
4 of 14
5 of 14
6 of 14
7 of 14
8 of 14
9 of 14
10 of 14
11 of 14
12 of 14
13 of 14
14 of 14
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Furr Arms 1/3 Gatling Guns and Napoleon cannon replicas.
Furr Arms 1/3 Gatling Guns and Napoleon cannon replicas.
Click Photo to Enlarge
Guns International #: 102257419
Seller's Inventory #: 0111
Category - Cannons - Antique and Replica
- Gatling Guns
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: jbfurr
Member Since: 9/25/20
First Name: Bruce
Last Name: Furr
State:
Utah
Zip: 84780
Country: United States
Phone:
(435) 429-1720
Active Listings: 22
Total Listings: 72
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: USPS Money Orders, Other money orders, Certified Bank Checks.
About Us: I am a retired firearms dealer and over the years, have accumulated some very nice firearms and other gun related items. It is now time to start finding a good home for many of my guns and accessories. Feel free to email or call me if you have any questions about what you find on Gunsinternational.
Furr Arms 1/3 Gatling Guns and Napoleon cannon replicas.
Description:
Unique, once in a lifetime sale. I am selling my Furr Arms built 1/3 scale models of 1874 ,1883 Gatling guns and 1/3 scale Napolean 6 Pound cannon. I am the younger brother of Karl Furr, founder of Furr Arms, He built these replicas for me personally and they have the same serial number, 111. Also, in order to reduce aging of the brass used in the Gatling Guns, I had him gold plate the brass on these Gatlings. The cannon was not gold plated, and does require occasional polishihng. These guns were built for me between 1974 and 1976. Now, because I believe in full disclosure about the condition of these replicas. In 2008, our house in Virginia was burned down, and these guns did recieve some surface blemishes when the fire was extinguished. I have carefully polished and cleaned up the brass and walnut but if you carefully examine the pieces, you can see some of the blemishes caused by the fire. From a few feet away, the blemishes are hardly noticeable.
Additional Info:
Project Description of the 1874 Gatling.
This is a 1/3 scale Models of the 1874 carriage Gatling gun made by Karl and Keith Furr In Orem, Utah. Serial # 111 is stamped the major parts. The 1874 gun is a ten barrel Gatling with the barrels exposed. The gun is chambered in, and will fire, the .22 short rimfire cartridge. The gun on the carriage is about 35″ long from the muzzle to end of trail, 24″ wide from axle tip to axle tip, and 20 3/4″ tall to the top of the magazine. The barrels are 12 5/8″ long, and are part round, with the muzzle end hex shaped. The wheels are 18″ in diameter and 11/16″ wide with brass hubs & tyres. The action, magazine, & hardware are all made of brass. The wheels, spokes, axle, & trail are American walnut. The barrels, and some internal parts are steel, & the barrels are nickel plated. The top rear of the barrel shroud is has a round data plate riveted on with the patent dates and manufactures information. There is a very blade front sight on the right side of the barrel frame at the muzzle. There is a fixture to hold the rear sight on the right side of the rear of the gun. The rear receiver ring has a removable plug to access the bolts for removal to clean both the bolts and the barrels. The trail has a hinged brass seat with a storage compartment underneath. At the rear of the gun bottom is an oscillator with two groves. The straight grove is for shooting straight ahead. The other grove sweeps the barrels back & forth 6 degrees and the handle is cranked giving the gunner a much wider field of fire. The magazine holds 220 rounds of .22 short rimfire ammunition. The gun is complete in every aspect, including the hanging chains for the trunion keepers, which are usually broken or missing. As noted above, there are some blemishes, but Mechanically excellent. The bores of the barrels and like new with no pitting or erosion.The Furr Gatlings are the Rolls Royce of miniature Gatling guns, and work flawlessly. Since this is a firing gun and is not antique, all FFL rules apply.
Shipping: Call me.
SOLD
Rifle Caliber: .22 Short
Manufacturer: Furr Arms
Model: Gatling Gun/Cannon
Serial Number: 111
Description:
Unique, once in a lifetime sale. I am selling my Furr Arms built 1/3 scale models of 1874 ,1883 Gatling guns and 1/3 scale Napolean 6 Pound cannon. I am the younger brother of Karl Furr, founder of Furr Arms, He built these replicas for me personally and they have the same serial number, 111. Also, in order to reduce aging of the brass used in the Gatling Guns, I had him gold plate the brass on these Gatlings. The cannon was not gold plated, and does require occasional polishihng. These guns were built for me between 1974 and 1976. Now, because I believe in full disclosure about the condition of these replicas. In 2008, our house in Virginia was burned down, and these guns did recieve some surface blemishes when the fire was extinguished. I have carefully polished and cleaned up the brass and walnut but if you carefully examine the pieces, you can see some of the blemishes caused by the fire. From a few feet away, the blemishes are hardly noticeable.
Additional Info:
Project Description of the 1874 Gatling.
This is a 1/3 scale Models of the 1874 carriage Gatling gun made by Karl and Keith Furr In Orem, Utah. Serial # 111 is stamped the major parts. The 1874 gun is a ten barrel Gatling with the barrels exposed. The gun is chambered in, and will fire, the .22 short rimfire cartridge. The gun on the carriage is about 35″ long from the muzzle to end of trail, 24″ wide from axle tip to axle tip, and 20 3/4″ tall to the top of the magazine. The barrels are 12 5/8″ long, and are part round, with the muzzle end hex shaped. The wheels are 18″ in diameter and 11/16″ wide with brass hubs & tyres. The action, magazine, & hardware are all made of brass. The wheels, spokes, axle, & trail are American walnut. The barrels, and some internal parts are steel, & the barrels are nickel plated. The top rear of the barrel shroud is has a round data plate riveted on with the patent dates and manufactures information. There is a very blade front sight on the right side of the barrel frame at the muzzle. There is a fixture to hold the rear sight on the right side of the rear of the gun. The rear receiver ring has a removable plug to access the bolts for removal to clean both the bolts and the barrels. The trail has a hinged brass seat with a storage compartment underneath. At the rear of the gun bottom is an oscillator with two groves. The straight grove is for shooting straight ahead. The other grove sweeps the barrels back & forth 6 degrees and the handle is cranked giving the gunner a much wider field of fire. The magazine holds 220 rounds of .22 short rimfire ammunition. The gun is complete in every aspect, including the hanging chains for the trunion keepers, which are usually broken or missing. As noted above, there are some blemishes, but Mechanically excellent. The bores of the barrels and like new with no pitting or erosion.The Furr Gatlings are the Rolls Royce of miniature Gatling guns, and work flawlessly. Since this is a firing gun and is not antique, all FFL rules apply.
Shipping: Call me.
SOLD
Rifle Caliber: .22 Short
Manufacturer: Furr Arms
Model: Gatling Gun/Cannon
Serial Number: 111
|
Click Photo to Enlarge
|
Guns International #: 102257419
Category - Cannons - Antique and Replica
- Gatling Guns
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: jbfurr
Member Since: 9/25/20
First Name: Bruce
Last Name: Furr
State:
Utah
Zip: 84780
Country: United States
Phone:
(435) 429-1720
Active Listings: 22
Total Listings: 72
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: USPS Money Orders, Other money orders, Certified Bank Checks.
About Us: I am a retired firearms dealer and over the years, have accumulated some very nice firearms and other gun related items. It is now time to start finding a good home for many of my guns and accessories. Feel free to email or call me if you have any questions about what you find on Gunsinternational.
Furr Arms 1/3 Gatling Guns and Napoleon cannon replicas.
Description: Unique, once in a lifetime sale. I am selling my Furr Arms built 1/3 scale models of 1874 ,1883 Gatling guns and 1/3 scale Napolean 6 Pound cannon. I am the younger brother of Karl Furr, founder of Furr Arms, He built these replicas for me personally and they have the same serial number, 111. Also, in order to reduce aging of the brass used in the Gatling Guns, I had him gold plate the brass on these Gatlings. The cannon was not gold plated, and does require occasional polishihng. These guns were built for me between 1974 and 1976. Now, because I believe in full disclosure about the condition of these replicas. In 2008, our house in Virginia was burned down, and these guns did recieve some surface blemishes when the fire was extinguished. I have carefully polished and cleaned up the brass and walnut but if you carefully examine the pieces, you can see some of the blemishes caused by the fire. From a few feet away, the blemishes are hardly noticeable. Additional Info: Project Description of the 1874 Gatling. This is a 1/3 scale Models of the 1874 carriage Gatling gun made by Karl and Keith Furr In Orem, Utah. Serial # 111 is stamped the major parts. The 1874 gun is a ten barrel Gatling with the barrels exposed. The gun is chambered in, and will fire, the .22 short rimfire cartridge. The gun on the carriage is about 35″ long from the muzzle to end of trail, 24″ wide from axle tip to axle tip, and 20 3/4″ tall to the top of the magazine. The barrels are 12 5/8″ long, and are part round, with the muzzle end hex shaped. The wheels are 18″ in diameter and 11/16″ wide with brass hubs & tyres. The action, magazine, & hardware are all made of brass. The wheels, spokes, axle, & trail are American walnut. The barrels, and some internal parts are steel, & the barrels are nickel plated. The top rear of the barrel shroud is has a round data plate riveted on with the patent dates and manufactures information. There is a very blade front sight on the right side of the barrel frame at the muzzle. There is a fixture to hold the rear sight on the right side of the rear of the gun. The rear receiver ring has a removable plug to access the bolts for removal to clean both the bolts and the barrels. The trail has a hinged brass seat with a storage compartment underneath. At the rear of the gun bottom is an oscillator with two groves. The straight grove is for shooting straight ahead. The other grove sweeps the barrels back & forth 6 degrees and the handle is cranked giving the gunner a much wider field of fire. The magazine holds 220 rounds of .22 short rimfire ammunition. The gun is complete in every aspect, including the hanging chains for the trunion keepers, which are usually broken or missing. As noted above, there are some blemishes, but Mechanically excellent. The bores of the barrels and like new with no pitting or erosion.The Furr Gatlings are the Rolls Royce of miniature Gatling guns, and work flawlessly. Since this is a firing gun and is not antique, all FFL rules apply. Shipping: Call me. SOLD Rifle Caliber: .22 Short Manufacturer: Furr Arms Model: Gatling Gun/Cannon Serial Number: 111 |
Click Photo to Enlarge
Guns International #: 102257419
Seller's Inventory #: 0111
Category - Cannons - Antique and Replica
- Gatling Guns
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: jbfurr
Member Since: 9/25/20
First Name: Bruce
Last Name: Furr
State:
Utah
Zip: 84780
Country: United States
Phone:
(435) 429-1720
Active Listings: 22
Total Listings: 72
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: USPS Money Orders, Other money orders, Certified Bank Checks.
About Us: I am a retired firearms dealer and over the years, have accumulated some very nice firearms and other gun related items. It is now time to start finding a good home for many of my guns and accessories. Feel free to email or call me if you have any questions about what you find on Gunsinternational.
Furr Arms 1/3 Gatling Guns and Napoleon cannon replicas.
Description:
Unique, once in a lifetime sale. I am selling my Furr Arms built 1/3 scale models of 1874 ,1883 Gatling guns and 1/3 scale Napolean 6 Pound cannon. I am the younger brother of Karl Furr, founder of Furr Arms, He built these replicas for me personally and they have the same serial number, 111. Also, in order to reduce aging of the brass used in the Gatling Guns, I had him gold plate the brass on these Gatlings. The cannon was not gold plated, and does require occasional polishihng. These guns were built for me between 1974 and 1976. Now, because I believe in full disclosure about the condition of these replicas. In 2008, our house in Virginia was burned down, and these guns did recieve some surface blemishes when the fire was extinguished. I have carefully polished and cleaned up the brass and walnut but if you carefully examine the pieces, you can see some of the blemishes caused by the fire. From a few feet away, the blemishes are hardly noticeable.
Additional Info:
Project Description of the 1874 Gatling.
This is a 1/3 scale Models of the 1874 carriage Gatling gun made by Karl and Keith Furr In Orem, Utah. Serial # 111 is stamped the major parts. The 1874 gun is a ten barrel Gatling with the barrels exposed. The gun is chambered in, and will fire, the .22 short rimfire cartridge. The gun on the carriage is about 35″ long from the muzzle to end of trail, 24″ wide from axle tip to axle tip, and 20 3/4″ tall to the top of the magazine. The barrels are 12 5/8″ long, and are part round, with the muzzle end hex shaped. The wheels are 18″ in diameter and 11/16″ wide with brass hubs & tyres. The action, magazine, & hardware are all made of brass. The wheels, spokes, axle, & trail are American walnut. The barrels, and some internal parts are steel, & the barrels are nickel plated. The top rear of the barrel shroud is has a round data plate riveted on with the patent dates and manufactures information. There is a very blade front sight on the right side of the barrel frame at the muzzle. There is a fixture to hold the rear sight on the right side of the rear of the gun. The rear receiver ring has a removable plug to access the bolts for removal to clean both the bolts and the barrels. The trail has a hinged brass seat with a storage compartment underneath. At the rear of the gun bottom is an oscillator with two groves. The straight grove is for shooting straight ahead. The other grove sweeps the barrels back & forth 6 degrees and the handle is cranked giving the gunner a much wider field of fire. The magazine holds 220 rounds of .22 short rimfire ammunition. The gun is complete in every aspect, including the hanging chains for the trunion keepers, which are usually broken or missing. As noted above, there are some blemishes, but Mechanically excellent. The bores of the barrels and like new with no pitting or erosion.The Furr Gatlings are the Rolls Royce of miniature Gatling guns, and work flawlessly. Since this is a firing gun and is not antique, all FFL rules apply.
Shipping: Call me.
SOLD
Rifle Caliber: .22 Short
Manufacturer: Furr Arms
Model: Gatling Gun/Cannon
Serial Number: 111
Description:
Unique, once in a lifetime sale. I am selling my Furr Arms built 1/3 scale models of 1874 ,1883 Gatling guns and 1/3 scale Napolean 6 Pound cannon. I am the younger brother of Karl Furr, founder of Furr Arms, He built these replicas for me personally and they have the same serial number, 111. Also, in order to reduce aging of the brass used in the Gatling Guns, I had him gold plate the brass on these Gatlings. The cannon was not gold plated, and does require occasional polishihng. These guns were built for me between 1974 and 1976. Now, because I believe in full disclosure about the condition of these replicas. In 2008, our house in Virginia was burned down, and these guns did recieve some surface blemishes when the fire was extinguished. I have carefully polished and cleaned up the brass and walnut but if you carefully examine the pieces, you can see some of the blemishes caused by the fire. From a few feet away, the blemishes are hardly noticeable.
Additional Info:
Project Description of the 1874 Gatling.
This is a 1/3 scale Models of the 1874 carriage Gatling gun made by Karl and Keith Furr In Orem, Utah. Serial # 111 is stamped the major parts. The 1874 gun is a ten barrel Gatling with the barrels exposed. The gun is chambered in, and will fire, the .22 short rimfire cartridge. The gun on the carriage is about 35″ long from the muzzle to end of trail, 24″ wide from axle tip to axle tip, and 20 3/4″ tall to the top of the magazine. The barrels are 12 5/8″ long, and are part round, with the muzzle end hex shaped. The wheels are 18″ in diameter and 11/16″ wide with brass hubs & tyres. The action, magazine, & hardware are all made of brass. The wheels, spokes, axle, & trail are American walnut. The barrels, and some internal parts are steel, & the barrels are nickel plated. The top rear of the barrel shroud is has a round data plate riveted on with the patent dates and manufactures information. There is a very blade front sight on the right side of the barrel frame at the muzzle. There is a fixture to hold the rear sight on the right side of the rear of the gun. The rear receiver ring has a removable plug to access the bolts for removal to clean both the bolts and the barrels. The trail has a hinged brass seat with a storage compartment underneath. At the rear of the gun bottom is an oscillator with two groves. The straight grove is for shooting straight ahead. The other grove sweeps the barrels back & forth 6 degrees and the handle is cranked giving the gunner a much wider field of fire. The magazine holds 220 rounds of .22 short rimfire ammunition. The gun is complete in every aspect, including the hanging chains for the trunion keepers, which are usually broken or missing. As noted above, there are some blemishes, but Mechanically excellent. The bores of the barrels and like new with no pitting or erosion.The Furr Gatlings are the Rolls Royce of miniature Gatling guns, and work flawlessly. Since this is a firing gun and is not antique, all FFL rules apply.
Shipping: Call me.
SOLD
Rifle Caliber: .22 Short
Manufacturer: Furr Arms
Model: Gatling Gun/Cannon
Serial Number: 111
Guns International #: 102257419
Seller's Inventory #: 0111
Guns International #: 102257419
Seller's Inventory #: 0111
Category - Cannons - Antique and Replica
- Gatling Guns
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: jbfurr
Member Since: 9/25/20
First Name: Bruce
Last Name: Furr
State:
Utah
Zip: 84780
Country: United States
Phone:
(435) 429-1720
Active Listings: 22
Total Listings: 72
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: USPS Money Orders, Other money orders, Certified Bank Checks.
About Us: I am a retired firearms dealer and over the years, have accumulated some very nice firearms and other gun related items. It is now time to start finding a good home for many of my guns and accessories. Feel free to email or call me if you have any questions about what you find on Gunsinternational.
Furr Arms 1/3 Gatling Guns and Napoleon cannon replicas.
Description:
Unique, once in a lifetime sale. I am selling my Furr Arms built 1/3 scale models of 1874 ,1883 Gatling guns and 1/3 scale Napolean 6 Pound cannon. I am the younger brother of Karl Furr, founder of Furr Arms, He built these replicas for me personally and they have the same serial number, 111. Also, in order to reduce aging of the brass used in the Gatling Guns, I had him gold plate the brass on these Gatlings. The cannon was not gold plated, and does require occasional polishihng. These guns were built for me between 1974 and 1976. Now, because I believe in full disclosure about the condition of these replicas. In 2008, our house in Virginia was burned down, and these guns did recieve some surface blemishes when the fire was extinguished. I have carefully polished and cleaned up the brass and walnut but if you carefully examine the pieces, you can see some of the blemishes caused by the fire. From a few feet away, the blemishes are hardly noticeable.
Additional Info:
Project Description of the 1874 Gatling.
This is a 1/3 scale Models of the 1874 carriage Gatling gun made by Karl and Keith Furr In Orem, Utah. Serial # 111 is stamped the major parts. The 1874 gun is a ten barrel Gatling with the barrels exposed. The gun is chambered in, and will fire, the .22 short rimfire cartridge. The gun on the carriage is about 35″ long from the muzzle to end of trail, 24″ wide from axle tip to axle tip, and 20 3/4″ tall to the top of the magazine. The barrels are 12 5/8″ long, and are part round, with the muzzle end hex shaped. The wheels are 18″ in diameter and 11/16″ wide with brass hubs & tyres. The action, magazine, & hardware are all made of brass. The wheels, spokes, axle, & trail are American walnut. The barrels, and some internal parts are steel, & the barrels are nickel plated. The top rear of the barrel shroud is has a round data plate riveted on with the patent dates and manufactures information. There is a very blade front sight on the right side of the barrel frame at the muzzle. There is a fixture to hold the rear sight on the right side of the rear of the gun. The rear receiver ring has a removable plug to access the bolts for removal to clean both the bolts and the barrels. The trail has a hinged brass seat with a storage compartment underneath. At the rear of the gun bottom is an oscillator with two groves. The straight grove is for shooting straight ahead. The other grove sweeps the barrels back & forth 6 degrees and the handle is cranked giving the gunner a much wider field of fire. The magazine holds 220 rounds of .22 short rimfire ammunition. The gun is complete in every aspect, including the hanging chains for the trunion keepers, which are usually broken or missing. As noted above, there are some blemishes, but Mechanically excellent. The bores of the barrels and like new with no pitting or erosion.The Furr Gatlings are the Rolls Royce of miniature Gatling guns, and work flawlessly. Since this is a firing gun and is not antique, all FFL rules apply.
Shipping: Call me.
SOLD
Rifle Caliber: .22 Short
Manufacturer: Furr Arms
Model: Gatling Gun/Cannon
Serial Number: 111
Description:
Unique, once in a lifetime sale. I am selling my Furr Arms built 1/3 scale models of 1874 ,1883 Gatling guns and 1/3 scale Napolean 6 Pound cannon. I am the younger brother of Karl Furr, founder of Furr Arms, He built these replicas for me personally and they have the same serial number, 111. Also, in order to reduce aging of the brass used in the Gatling Guns, I had him gold plate the brass on these Gatlings. The cannon was not gold plated, and does require occasional polishihng. These guns were built for me between 1974 and 1976. Now, because I believe in full disclosure about the condition of these replicas. In 2008, our house in Virginia was burned down, and these guns did recieve some surface blemishes when the fire was extinguished. I have carefully polished and cleaned up the brass and walnut but if you carefully examine the pieces, you can see some of the blemishes caused by the fire. From a few feet away, the blemishes are hardly noticeable.
Additional Info:
Project Description of the 1874 Gatling.
This is a 1/3 scale Models of the 1874 carriage Gatling gun made by Karl and Keith Furr In Orem, Utah. Serial # 111 is stamped the major parts. The 1874 gun is a ten barrel Gatling with the barrels exposed. The gun is chambered in, and will fire, the .22 short rimfire cartridge. The gun on the carriage is about 35″ long from the muzzle to end of trail, 24″ wide from axle tip to axle tip, and 20 3/4″ tall to the top of the magazine. The barrels are 12 5/8″ long, and are part round, with the muzzle end hex shaped. The wheels are 18″ in diameter and 11/16″ wide with brass hubs & tyres. The action, magazine, & hardware are all made of brass. The wheels, spokes, axle, & trail are American walnut. The barrels, and some internal parts are steel, & the barrels are nickel plated. The top rear of the barrel shroud is has a round data plate riveted on with the patent dates and manufactures information. There is a very blade front sight on the right side of the barrel frame at the muzzle. There is a fixture to hold the rear sight on the right side of the rear of the gun. The rear receiver ring has a removable plug to access the bolts for removal to clean both the bolts and the barrels. The trail has a hinged brass seat with a storage compartment underneath. At the rear of the gun bottom is an oscillator with two groves. The straight grove is for shooting straight ahead. The other grove sweeps the barrels back & forth 6 degrees and the handle is cranked giving the gunner a much wider field of fire. The magazine holds 220 rounds of .22 short rimfire ammunition. The gun is complete in every aspect, including the hanging chains for the trunion keepers, which are usually broken or missing. As noted above, there are some blemishes, but Mechanically excellent. The bores of the barrels and like new with no pitting or erosion.The Furr Gatlings are the Rolls Royce of miniature Gatling guns, and work flawlessly. Since this is a firing gun and is not antique, all FFL rules apply.
Shipping: Call me.
SOLD
Rifle Caliber: .22 Short
Manufacturer: Furr Arms
Model: Gatling Gun/Cannon
Serial Number: 111
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww1
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww1
Guns International.com | V4.1 ww1