to Favorites
1 of 16
2 of 16
3 of 16
4 of 16
5 of 16
6 of 16
7 of 16
8 of 16
9 of 16
10 of 16
11 of 16
12 of 16
13 of 16
14 of 16
15 of 16
16 of 16
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Original antique 1860 Henry rifle in .44
Original antique 1860 Henry rifle in .44
Click Photo to Enlarge
Guns International #: 101470797
Seller's Inventory #: 107639
Category - Henry Rifles - Antique
Category
Henry Rifles - Antique
Henry Rifles - Antique
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: The Firing Line
Company: Firing Line
Company: Firing Line
Member Since: 4/11/07
First Name: Shyanne
Last Name: Pancake
State:
Colorado
Zip: 80012
Country: United States
Phone:
(303) 363-0041
Fax:
(303) 363-9155
Platinum Seller
Active Listings: 90
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: credit cards, cashiers checks
Original antique 1860 Henry rifle in .44
Description:
Here we have available an original antique 1860 Henry rifle. Serial number 10665. We will admit upfront that it has quite a few little issues. Some easily fixed, some maybe not, just being honest. I'll tell you everything I can about this old girl. Again- this is an original 1860 Henry, not an aged repop. First off, the lever hangs a bit, as shown in one of the pics, that is a inside mechanical issues that is likely easily fixed. The top tang is cracked thru, as you can see in the picture. It looks like there might be a period repair, but I don't want to take a chance and take the stock off, you just never know what's going to happen with these old guns when you start tearing them down. It seems solid. Usually best to leave well enough alone. The buttstock isn't the greatest fit, and if original, has been sanded quite a bit. The magazine spring is several inches short, and likely very fragile. The brass magazine follower does not want to run all of the way up to the barrel sleeve, and I don't want to force it, nor risk breaking the fragile magazine spring. The lever hook is very worn and loose in the lower tang, so does not lock the lever in place. The rear sight has been cut, purposefully I think. The worst is that there are two cuts in the top flat of the barrel, one on each side of the rear sight dovetail. I have no idea why. The one in the back partially obscures the serial number, so I had to remove the buttplate to get that, as original Henry serial numbers are scribed on the inside of the buttplate as well. Barrel interior is dark with strong rifling. Exterior has no original finish, with varying levels of pitting and numbers of "dents" in the metal, especially on the underside of the barrel sleeve. Henry markings on top flat of the barrel are strong and easily legible. The action seems to work just fine, hammer locks back, fires, etc. Brass is smooth with an even mustard patina. There is a W, or an M, stamped into the bottom tang between the lever hook and the rearmost screw head. I have described this accurately and the pics tell some of the rest of the story. Shipping will vary depending on destination, but figure on $250, which will include a good hardcase.
SOLD
Description:
Here we have available an original antique 1860 Henry rifle. Serial number 10665. We will admit upfront that it has quite a few little issues. Some easily fixed, some maybe not, just being honest. I'll tell you everything I can about this old girl. Again- this is an original 1860 Henry, not an aged repop. First off, the lever hangs a bit, as shown in one of the pics, that is a inside mechanical issues that is likely easily fixed. The top tang is cracked thru, as you can see in the picture. It looks like there might be a period repair, but I don't want to take a chance and take the stock off, you just never know what's going to happen with these old guns when you start tearing them down. It seems solid. Usually best to leave well enough alone. The buttstock isn't the greatest fit, and if original, has been sanded quite a bit. The magazine spring is several inches short, and likely very fragile. The brass magazine follower does not want to run all of the way up to the barrel sleeve, and I don't want to force it, nor risk breaking the fragile magazine spring. The lever hook is very worn and loose in the lower tang, so does not lock the lever in place. The rear sight has been cut, purposefully I think. The worst is that there are two cuts in the top flat of the barrel, one on each side of the rear sight dovetail. I have no idea why. The one in the back partially obscures the serial number, so I had to remove the buttplate to get that, as original Henry serial numbers are scribed on the inside of the buttplate as well. Barrel interior is dark with strong rifling. Exterior has no original finish, with varying levels of pitting and numbers of "dents" in the metal, especially on the underside of the barrel sleeve. Henry markings on top flat of the barrel are strong and easily legible. The action seems to work just fine, hammer locks back, fires, etc. Brass is smooth with an even mustard patina. There is a W, or an M, stamped into the bottom tang between the lever hook and the rearmost screw head. I have described this accurately and the pics tell some of the rest of the story. Shipping will vary depending on destination, but figure on $250, which will include a good hardcase.
SOLD
|
Click Photo to Enlarge
|
Guns International #: 101470797
Category - Henry Rifles - Antique
Category
Henry Rifles - Antique
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: The Firing Line
Company: Firing Line Member Since: 4/11/07
First Name: Shyanne
Last Name: Pancake
State:
Colorado
Zip: 80012
Country: United States
Phone:
(303) 363-0041
Fax:
(303) 363-9155
Platinum Seller
Active Listings: 90
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days Payment Methods: credit cards, cashiers checks
Original antique 1860 Henry rifle in .44
Description: Here we have available an original antique 1860 Henry rifle. Serial number 10665. We will admit upfront that it has quite a few little issues. Some easily fixed, some maybe not, just being honest. I'll tell you everything I can about this old girl. Again- this is an original 1860 Henry, not an aged repop. First off, the lever hangs a bit, as shown in one of the pics, that is a inside mechanical issues that is likely easily fixed. The top tang is cracked thru, as you can see in the picture. It looks like there might be a period repair, but I don't want to take a chance and take the stock off, you just never know what's going to happen with these old guns when you start tearing them down. It seems solid. Usually best to leave well enough alone. The buttstock isn't the greatest fit, and if original, has been sanded quite a bit. The magazine spring is several inches short, and likely very fragile. The brass magazine follower does not want to run all of the way up to the barrel sleeve, and I don't want to force it, nor risk breaking the fragile magazine spring. The lever hook is very worn and loose in the lower tang, so does not lock the lever in place. The rear sight has been cut, purposefully I think. The worst is that there are two cuts in the top flat of the barrel, one on each side of the rear sight dovetail. I have no idea why. The one in the back partially obscures the serial number, so I had to remove the buttplate to get that, as original Henry serial numbers are scribed on the inside of the buttplate as well. Barrel interior is dark with strong rifling. Exterior has no original finish, with varying levels of pitting and numbers of "dents" in the metal, especially on the underside of the barrel sleeve. Henry markings on top flat of the barrel are strong and easily legible. The action seems to work just fine, hammer locks back, fires, etc. Brass is smooth with an even mustard patina. There is a W, or an M, stamped into the bottom tang between the lever hook and the rearmost screw head. I have described this accurately and the pics tell some of the rest of the story. Shipping will vary depending on destination, but figure on $250, which will include a good hardcase. SOLD |
Click Photo to Enlarge
Guns International #: 101470797
Seller's Inventory #: 107639
Category - Henry Rifles - Antique
Category
Henry Rifles - Antique
Henry Rifles - Antique
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: The Firing Line
Company: Firing Line
Company: Firing Line
Member Since: 4/11/07
First Name: Shyanne
Last Name: Pancake
State:
Colorado
Zip: 80012
Country: United States
Phone:
(303) 363-0041
Fax:
(303) 363-9155
Platinum Seller
Active Listings: 90
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: credit cards, cashiers checks
Original antique 1860 Henry rifle in .44
Description:
Here we have available an original antique 1860 Henry rifle. Serial number 10665. We will admit upfront that it has quite a few little issues. Some easily fixed, some maybe not, just being honest. I'll tell you everything I can about this old girl. Again- this is an original 1860 Henry, not an aged repop. First off, the lever hangs a bit, as shown in one of the pics, that is a inside mechanical issues that is likely easily fixed. The top tang is cracked thru, as you can see in the picture. It looks like there might be a period repair, but I don't want to take a chance and take the stock off, you just never know what's going to happen with these old guns when you start tearing them down. It seems solid. Usually best to leave well enough alone. The buttstock isn't the greatest fit, and if original, has been sanded quite a bit. The magazine spring is several inches short, and likely very fragile. The brass magazine follower does not want to run all of the way up to the barrel sleeve, and I don't want to force it, nor risk breaking the fragile magazine spring. The lever hook is very worn and loose in the lower tang, so does not lock the lever in place. The rear sight has been cut, purposefully I think. The worst is that there are two cuts in the top flat of the barrel, one on each side of the rear sight dovetail. I have no idea why. The one in the back partially obscures the serial number, so I had to remove the buttplate to get that, as original Henry serial numbers are scribed on the inside of the buttplate as well. Barrel interior is dark with strong rifling. Exterior has no original finish, with varying levels of pitting and numbers of "dents" in the metal, especially on the underside of the barrel sleeve. Henry markings on top flat of the barrel are strong and easily legible. The action seems to work just fine, hammer locks back, fires, etc. Brass is smooth with an even mustard patina. There is a W, or an M, stamped into the bottom tang between the lever hook and the rearmost screw head. I have described this accurately and the pics tell some of the rest of the story. Shipping will vary depending on destination, but figure on $250, which will include a good hardcase.
SOLD
Description:
Here we have available an original antique 1860 Henry rifle. Serial number 10665. We will admit upfront that it has quite a few little issues. Some easily fixed, some maybe not, just being honest. I'll tell you everything I can about this old girl. Again- this is an original 1860 Henry, not an aged repop. First off, the lever hangs a bit, as shown in one of the pics, that is a inside mechanical issues that is likely easily fixed. The top tang is cracked thru, as you can see in the picture. It looks like there might be a period repair, but I don't want to take a chance and take the stock off, you just never know what's going to happen with these old guns when you start tearing them down. It seems solid. Usually best to leave well enough alone. The buttstock isn't the greatest fit, and if original, has been sanded quite a bit. The magazine spring is several inches short, and likely very fragile. The brass magazine follower does not want to run all of the way up to the barrel sleeve, and I don't want to force it, nor risk breaking the fragile magazine spring. The lever hook is very worn and loose in the lower tang, so does not lock the lever in place. The rear sight has been cut, purposefully I think. The worst is that there are two cuts in the top flat of the barrel, one on each side of the rear sight dovetail. I have no idea why. The one in the back partially obscures the serial number, so I had to remove the buttplate to get that, as original Henry serial numbers are scribed on the inside of the buttplate as well. Barrel interior is dark with strong rifling. Exterior has no original finish, with varying levels of pitting and numbers of "dents" in the metal, especially on the underside of the barrel sleeve. Henry markings on top flat of the barrel are strong and easily legible. The action seems to work just fine, hammer locks back, fires, etc. Brass is smooth with an even mustard patina. There is a W, or an M, stamped into the bottom tang between the lever hook and the rearmost screw head. I have described this accurately and the pics tell some of the rest of the story. Shipping will vary depending on destination, but figure on $250, which will include a good hardcase.
SOLD
Guns International #: 101470797
Seller's Inventory #: 107639
Guns International #: 101470797
Seller's Inventory #: 107639
Category - Henry Rifles - Antique
Category
Henry Rifles - Antique
Henry Rifles - Antique
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: The Firing Line
Company: Firing Line
Company: Firing Line
Member Since: 4/11/07
First Name: Shyanne
Last Name: Pancake
State:
Colorado
Zip: 80012
Country: United States
Phone:
(303) 363-0041
Fax:
(303) 363-9155
Platinum Seller
Active Listings: 90
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: credit cards, cashiers checks
Original antique 1860 Henry rifle in .44
Description:
Here we have available an original antique 1860 Henry rifle. Serial number 10665. We will admit upfront that it has quite a few little issues. Some easily fixed, some maybe not, just being honest. I'll tell you everything I can about this old girl. Again- this is an original 1860 Henry, not an aged repop. First off, the lever hangs a bit, as shown in one of the pics, that is a inside mechanical issues that is likely easily fixed. The top tang is cracked thru, as you can see in the picture. It looks like there might be a period repair, but I don't want to take a chance and take the stock off, you just never know what's going to happen with these old guns when you start tearing them down. It seems solid. Usually best to leave well enough alone. The buttstock isn't the greatest fit, and if original, has been sanded quite a bit. The magazine spring is several inches short, and likely very fragile. The brass magazine follower does not want to run all of the way up to the barrel sleeve, and I don't want to force it, nor risk breaking the fragile magazine spring. The lever hook is very worn and loose in the lower tang, so does not lock the lever in place. The rear sight has been cut, purposefully I think. The worst is that there are two cuts in the top flat of the barrel, one on each side of the rear sight dovetail. I have no idea why. The one in the back partially obscures the serial number, so I had to remove the buttplate to get that, as original Henry serial numbers are scribed on the inside of the buttplate as well. Barrel interior is dark with strong rifling. Exterior has no original finish, with varying levels of pitting and numbers of "dents" in the metal, especially on the underside of the barrel sleeve. Henry markings on top flat of the barrel are strong and easily legible. The action seems to work just fine, hammer locks back, fires, etc. Brass is smooth with an even mustard patina. There is a W, or an M, stamped into the bottom tang between the lever hook and the rearmost screw head. I have described this accurately and the pics tell some of the rest of the story. Shipping will vary depending on destination, but figure on $250, which will include a good hardcase.
SOLD
Description:
Here we have available an original antique 1860 Henry rifle. Serial number 10665. We will admit upfront that it has quite a few little issues. Some easily fixed, some maybe not, just being honest. I'll tell you everything I can about this old girl. Again- this is an original 1860 Henry, not an aged repop. First off, the lever hangs a bit, as shown in one of the pics, that is a inside mechanical issues that is likely easily fixed. The top tang is cracked thru, as you can see in the picture. It looks like there might be a period repair, but I don't want to take a chance and take the stock off, you just never know what's going to happen with these old guns when you start tearing them down. It seems solid. Usually best to leave well enough alone. The buttstock isn't the greatest fit, and if original, has been sanded quite a bit. The magazine spring is several inches short, and likely very fragile. The brass magazine follower does not want to run all of the way up to the barrel sleeve, and I don't want to force it, nor risk breaking the fragile magazine spring. The lever hook is very worn and loose in the lower tang, so does not lock the lever in place. The rear sight has been cut, purposefully I think. The worst is that there are two cuts in the top flat of the barrel, one on each side of the rear sight dovetail. I have no idea why. The one in the back partially obscures the serial number, so I had to remove the buttplate to get that, as original Henry serial numbers are scribed on the inside of the buttplate as well. Barrel interior is dark with strong rifling. Exterior has no original finish, with varying levels of pitting and numbers of "dents" in the metal, especially on the underside of the barrel sleeve. Henry markings on top flat of the barrel are strong and easily legible. The action seems to work just fine, hammer locks back, fires, etc. Brass is smooth with an even mustard patina. There is a W, or an M, stamped into the bottom tang between the lever hook and the rearmost screw head. I have described this accurately and the pics tell some of the rest of the story. Shipping will vary depending on destination, but figure on $250, which will include a good hardcase.
SOLD
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww2
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww2
Guns International.com | V4.1 ww2