to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Gorgeous Custom Marlin Model 39A .22LR
Gorgeous Custom Marlin Model 39A .22LR
Click Photo to Enlarge
Guns International #: 102333964
Category - Marlin Rifles - Rimfire
- Rimfire American Rifles
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Itchingtodeal
Member Since: 9/12/21
State:
Texas
Zip: 78660
Country: United States
Phone:
(512) 251-5191
Active Listings: 0
Total Listings: 18
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: USPS Money Order or Certified Cashier Check
Gorgeous Custom Marlin Model 39A .22LR
Description:
For sale is a gorgeous custom Marlin Model 39A rifle in .22LR. It features a 1/2 octagon 1/2 round 23.5” barrel stamped MARLIN FIREARMS CO on the right side, CAL. 22 L. R. on the left side. There is a small ring of engraving around the transition from octagon to round. The rear tang peep sight is a Lyman 2A-H. The barrel rear sight is a “buckhorn-type” and will flip down to allow use of the tang peep sight. It’s attached to the barrel using a dovetail slot. The front sight is a Lyman with gold bead. It’s directly attached to the barrel using a dovetail slot. The ¾ tube magazine will hold a maximum of 7 cartridges, 8 with one in the chamber. The stock and forearm appear to be very dense highly grained walnut with 20 to 21 LPI checkering. The rifle is 39.6” long and weighs 6lb 2oz. which is significantly lighter than a standard current model 39A.
Engraved or roll stamped on top of the receiver is MARLIN SAFETY inside a border with one small diamond shaped figure on each end. The top of the receiver tang is drilled and tapped for the Lyman tang sight. MODEL 39A is roll stamped between the holes. The bottom receiver tang is deeply stamped with the K1204 serial number. The bottom tang is color case hardened but not engraved.
All the color case hardened metal is conservatively and tastefully engraved including the forearm cap, both sides of the receiver, bottom of the lever and the butt plate. There’s a double border engraved around the perimeter of each side of the receiver. The butt plate engraving is located around the two screws – one on top and one on the back near the toe. The take down screw is engraved with small diamond shaped figures aligned next to each other inside a double circle border around the circumference of the screw head. Each diamond figure has a very small indention or hole in the center. The trigger, hammer and breech bolt are dark black blued without engraving. The top rear of the hammer has parallel serrations, no diamond pattern.
NOTE - I SELL TO CALIFORNIA BUYERS FOR NO ADDITIONAL CHARGE. Layaway is available for an additional $50 fee. Layaway requires 1/3 down immediately, 1/3 in 30 days & the balance in 60 days. ABSOLUTELY NO REFUND ON CANCELED OR UNCOMPLETED LAYAWAYS. The rifle will be shipped after the final payment is received.
Shipping & handling is $50.00 (CONUS only), which also covers full insurance. Shipping to Alaska & Hawaii will require an additional charge. I only ship FedEx ground fully insured. For immediate shipping US Postal Service money orders are required. Certified cashier’s checks will delay shipping 5 business days. A phone number is required to contact the issuer of a cashier's check for verification. No other forms of payment are accepted.
SOLD
Rifle Caliber: .22 Long Rifle
Manufacturer: Marlin Custom
Model: Custom 39A
Serial Number: K1204
Barrel Length: 25.5
Condition: 98%
Metal Condition: 98%
Wood Condition: 98%
Bore Condition: Pristine
Barrel Type: 1/2 octagon 1/2 round
Action: Lever
Description:
For sale is a gorgeous custom Marlin Model 39A rifle in .22LR. It features a 1/2 octagon 1/2 round 23.5” barrel stamped MARLIN FIREARMS CO on the right side, CAL. 22 L. R. on the left side. There is a small ring of engraving around the transition from octagon to round. The rear tang peep sight is a Lyman 2A-H. The barrel rear sight is a “buckhorn-type” and will flip down to allow use of the tang peep sight. It’s attached to the barrel using a dovetail slot. The front sight is a Lyman with gold bead. It’s directly attached to the barrel using a dovetail slot. The ¾ tube magazine will hold a maximum of 7 cartridges, 8 with one in the chamber. The stock and forearm appear to be very dense highly grained walnut with 20 to 21 LPI checkering. The rifle is 39.6” long and weighs 6lb 2oz. which is significantly lighter than a standard current model 39A.
Engraved or roll stamped on top of the receiver is MARLIN SAFETY inside a border with one small diamond shaped figure on each end. The top of the receiver tang is drilled and tapped for the Lyman tang sight. MODEL 39A is roll stamped between the holes. The bottom receiver tang is deeply stamped with the K1204 serial number. The bottom tang is color case hardened but not engraved.
All the color case hardened metal is conservatively and tastefully engraved including the forearm cap, both sides of the receiver, bottom of the lever and the butt plate. There’s a double border engraved around the perimeter of each side of the receiver. The butt plate engraving is located around the two screws – one on top and one on the back near the toe. The take down screw is engraved with small diamond shaped figures aligned next to each other inside a double circle border around the circumference of the screw head. Each diamond figure has a very small indention or hole in the center. The trigger, hammer and breech bolt are dark black blued without engraving. The top rear of the hammer has parallel serrations, no diamond pattern.
NOTE - I SELL TO CALIFORNIA BUYERS FOR NO ADDITIONAL CHARGE. Layaway is available for an additional $50 fee. Layaway requires 1/3 down immediately, 1/3 in 30 days & the balance in 60 days. ABSOLUTELY NO REFUND ON CANCELED OR UNCOMPLETED LAYAWAYS. The rifle will be shipped after the final payment is received.
Shipping & handling is $50.00 (CONUS only), which also covers full insurance. Shipping to Alaska & Hawaii will require an additional charge. I only ship FedEx ground fully insured. For immediate shipping US Postal Service money orders are required. Certified cashier’s checks will delay shipping 5 business days. A phone number is required to contact the issuer of a cashier's check for verification. No other forms of payment are accepted.
SOLD
Rifle Caliber: .22 Long Rifle
Manufacturer: Marlin Custom
Model: Custom 39A
Serial Number: K1204
Barrel Length: 25.5
Condition: 98%
Metal Condition: 98%
Wood Condition: 98%
Bore Condition: Pristine
Barrel Type: 1/2 octagon 1/2 round
Action: Lever
|
Click Photo to Enlarge
|
Guns International #: 102333964
Category - Marlin Rifles - Rimfire
- Rimfire American Rifles
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Itchingtodeal
Member Since: 9/12/21
State:
Texas
Zip: 78660
Country: United States
Phone:
(512) 251-5191
Active Listings: 0
Total Listings: 18
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: USPS Money Order or Certified Cashier Check
Gorgeous Custom Marlin Model 39A .22LR
Description: For sale is a gorgeous custom Marlin Model 39A rifle in .22LR. It features a 1/2 octagon 1/2 round 23.5” barrel stamped MARLIN FIREARMS CO on the right side, CAL. 22 L. R. on the left side. There is a small ring of engraving around the transition from octagon to round. The rear tang peep sight is a Lyman 2A-H. The barrel rear sight is a “buckhorn-type” and will flip down to allow use of the tang peep sight. It’s attached to the barrel using a dovetail slot. The front sight is a Lyman with gold bead. It’s directly attached to the barrel using a dovetail slot. The ¾ tube magazine will hold a maximum of 7 cartridges, 8 with one in the chamber. The stock and forearm appear to be very dense highly grained walnut with 20 to 21 LPI checkering. The rifle is 39.6” long and weighs 6lb 2oz. which is significantly lighter than a standard current model 39A. Engraved or roll stamped on top of the receiver is MARLIN SAFETY inside a border with one small diamond shaped figure on each end. The top of the receiver tang is drilled and tapped for the Lyman tang sight. MODEL 39A is roll stamped between the holes. The bottom receiver tang is deeply stamped with the K1204 serial number. The bottom tang is color case hardened but not engraved. All the color case hardened metal is conservatively and tastefully engraved including the forearm cap, both sides of the receiver, bottom of the lever and the butt plate. There’s a double border engraved around the perimeter of each side of the receiver. The butt plate engraving is located around the two screws – one on top and one on the back near the toe. The take down screw is engraved with small diamond shaped figures aligned next to each other inside a double circle border around the circumference of the screw head. Each diamond figure has a very small indention or hole in the center. The trigger, hammer and breech bolt are dark black blued without engraving. The top rear of the hammer has parallel serrations, no diamond pattern. NOTE - I SELL TO CALIFORNIA BUYERS FOR NO ADDITIONAL CHARGE. Layaway is available for an additional $50 fee. Layaway requires 1/3 down immediately, 1/3 in 30 days & the balance in 60 days. ABSOLUTELY NO REFUND ON CANCELED OR UNCOMPLETED LAYAWAYS. The rifle will be shipped after the final payment is received. Shipping & handling is $50.00 (CONUS only), which also covers full insurance. Shipping to Alaska & Hawaii will require an additional charge. I only ship FedEx ground fully insured. For immediate shipping US Postal Service money orders are required. Certified cashier’s checks will delay shipping 5 business days. A phone number is required to contact the issuer of a cashier's check for verification. No other forms of payment are accepted. SOLD Rifle Caliber: .22 Long Rifle Manufacturer: Marlin Custom Model: Custom 39A Serial Number: K1204 Barrel Length: 25.5 Condition: 98% Metal Condition: 98% Wood Condition: 98% Bore Condition: Pristine Barrel Type: 1/2 octagon 1/2 round Action: Lever |
Click Photo to Enlarge
Guns International #: 102333964
Category - Marlin Rifles - Rimfire
- Rimfire American Rifles
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Itchingtodeal
Member Since: 9/12/21
State:
Texas
Zip: 78660
Country: United States
Phone:
(512) 251-5191
Active Listings: 0
Total Listings: 18
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: USPS Money Order or Certified Cashier Check
Gorgeous Custom Marlin Model 39A .22LR
Description:
For sale is a gorgeous custom Marlin Model 39A rifle in .22LR. It features a 1/2 octagon 1/2 round 23.5” barrel stamped MARLIN FIREARMS CO on the right side, CAL. 22 L. R. on the left side. There is a small ring of engraving around the transition from octagon to round. The rear tang peep sight is a Lyman 2A-H. The barrel rear sight is a “buckhorn-type” and will flip down to allow use of the tang peep sight. It’s attached to the barrel using a dovetail slot. The front sight is a Lyman with gold bead. It’s directly attached to the barrel using a dovetail slot. The ¾ tube magazine will hold a maximum of 7 cartridges, 8 with one in the chamber. The stock and forearm appear to be very dense highly grained walnut with 20 to 21 LPI checkering. The rifle is 39.6” long and weighs 6lb 2oz. which is significantly lighter than a standard current model 39A.
Engraved or roll stamped on top of the receiver is MARLIN SAFETY inside a border with one small diamond shaped figure on each end. The top of the receiver tang is drilled and tapped for the Lyman tang sight. MODEL 39A is roll stamped between the holes. The bottom receiver tang is deeply stamped with the K1204 serial number. The bottom tang is color case hardened but not engraved.
All the color case hardened metal is conservatively and tastefully engraved including the forearm cap, both sides of the receiver, bottom of the lever and the butt plate. There’s a double border engraved around the perimeter of each side of the receiver. The butt plate engraving is located around the two screws – one on top and one on the back near the toe. The take down screw is engraved with small diamond shaped figures aligned next to each other inside a double circle border around the circumference of the screw head. Each diamond figure has a very small indention or hole in the center. The trigger, hammer and breech bolt are dark black blued without engraving. The top rear of the hammer has parallel serrations, no diamond pattern.
NOTE - I SELL TO CALIFORNIA BUYERS FOR NO ADDITIONAL CHARGE. Layaway is available for an additional $50 fee. Layaway requires 1/3 down immediately, 1/3 in 30 days & the balance in 60 days. ABSOLUTELY NO REFUND ON CANCELED OR UNCOMPLETED LAYAWAYS. The rifle will be shipped after the final payment is received.
Shipping & handling is $50.00 (CONUS only), which also covers full insurance. Shipping to Alaska & Hawaii will require an additional charge. I only ship FedEx ground fully insured. For immediate shipping US Postal Service money orders are required. Certified cashier’s checks will delay shipping 5 business days. A phone number is required to contact the issuer of a cashier's check for verification. No other forms of payment are accepted.
SOLD
Rifle Caliber: .22 Long Rifle
Manufacturer: Marlin Custom
Model: Custom 39A
Serial Number: K1204
Barrel Length: 25.5
Condition: 98%
Metal Condition: 98%
Wood Condition: 98%
Bore Condition: Pristine
Barrel Type: 1/2 octagon 1/2 round
Action: Lever
Description:
For sale is a gorgeous custom Marlin Model 39A rifle in .22LR. It features a 1/2 octagon 1/2 round 23.5” barrel stamped MARLIN FIREARMS CO on the right side, CAL. 22 L. R. on the left side. There is a small ring of engraving around the transition from octagon to round. The rear tang peep sight is a Lyman 2A-H. The barrel rear sight is a “buckhorn-type” and will flip down to allow use of the tang peep sight. It’s attached to the barrel using a dovetail slot. The front sight is a Lyman with gold bead. It’s directly attached to the barrel using a dovetail slot. The ¾ tube magazine will hold a maximum of 7 cartridges, 8 with one in the chamber. The stock and forearm appear to be very dense highly grained walnut with 20 to 21 LPI checkering. The rifle is 39.6” long and weighs 6lb 2oz. which is significantly lighter than a standard current model 39A.
Engraved or roll stamped on top of the receiver is MARLIN SAFETY inside a border with one small diamond shaped figure on each end. The top of the receiver tang is drilled and tapped for the Lyman tang sight. MODEL 39A is roll stamped between the holes. The bottom receiver tang is deeply stamped with the K1204 serial number. The bottom tang is color case hardened but not engraved.
All the color case hardened metal is conservatively and tastefully engraved including the forearm cap, both sides of the receiver, bottom of the lever and the butt plate. There’s a double border engraved around the perimeter of each side of the receiver. The butt plate engraving is located around the two screws – one on top and one on the back near the toe. The take down screw is engraved with small diamond shaped figures aligned next to each other inside a double circle border around the circumference of the screw head. Each diamond figure has a very small indention or hole in the center. The trigger, hammer and breech bolt are dark black blued without engraving. The top rear of the hammer has parallel serrations, no diamond pattern.
NOTE - I SELL TO CALIFORNIA BUYERS FOR NO ADDITIONAL CHARGE. Layaway is available for an additional $50 fee. Layaway requires 1/3 down immediately, 1/3 in 30 days & the balance in 60 days. ABSOLUTELY NO REFUND ON CANCELED OR UNCOMPLETED LAYAWAYS. The rifle will be shipped after the final payment is received.
Shipping & handling is $50.00 (CONUS only), which also covers full insurance. Shipping to Alaska & Hawaii will require an additional charge. I only ship FedEx ground fully insured. For immediate shipping US Postal Service money orders are required. Certified cashier’s checks will delay shipping 5 business days. A phone number is required to contact the issuer of a cashier's check for verification. No other forms of payment are accepted.
SOLD
Rifle Caliber: .22 Long Rifle
Manufacturer: Marlin Custom
Model: Custom 39A
Serial Number: K1204
Barrel Length: 25.5
Condition: 98%
Metal Condition: 98%
Wood Condition: 98%
Bore Condition: Pristine
Barrel Type: 1/2 octagon 1/2 round
Action: Lever
Guns International #: 102333964
Guns International #: 102333964
Category - Marlin Rifles - Rimfire
- Rimfire American Rifles
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Itchingtodeal
Member Since: 9/12/21
State:
Texas
Zip: 78660
Country: United States
Phone:
(512) 251-5191
Active Listings: 0
Total Listings: 18
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: USPS Money Order or Certified Cashier Check
Gorgeous Custom Marlin Model 39A .22LR
Description:
For sale is a gorgeous custom Marlin Model 39A rifle in .22LR. It features a 1/2 octagon 1/2 round 23.5” barrel stamped MARLIN FIREARMS CO on the right side, CAL. 22 L. R. on the left side. There is a small ring of engraving around the transition from octagon to round. The rear tang peep sight is a Lyman 2A-H. The barrel rear sight is a “buckhorn-type” and will flip down to allow use of the tang peep sight. It’s attached to the barrel using a dovetail slot. The front sight is a Lyman with gold bead. It’s directly attached to the barrel using a dovetail slot. The ¾ tube magazine will hold a maximum of 7 cartridges, 8 with one in the chamber. The stock and forearm appear to be very dense highly grained walnut with 20 to 21 LPI checkering. The rifle is 39.6” long and weighs 6lb 2oz. which is significantly lighter than a standard current model 39A.
Engraved or roll stamped on top of the receiver is MARLIN SAFETY inside a border with one small diamond shaped figure on each end. The top of the receiver tang is drilled and tapped for the Lyman tang sight. MODEL 39A is roll stamped between the holes. The bottom receiver tang is deeply stamped with the K1204 serial number. The bottom tang is color case hardened but not engraved.
All the color case hardened metal is conservatively and tastefully engraved including the forearm cap, both sides of the receiver, bottom of the lever and the butt plate. There’s a double border engraved around the perimeter of each side of the receiver. The butt plate engraving is located around the two screws – one on top and one on the back near the toe. The take down screw is engraved with small diamond shaped figures aligned next to each other inside a double circle border around the circumference of the screw head. Each diamond figure has a very small indention or hole in the center. The trigger, hammer and breech bolt are dark black blued without engraving. The top rear of the hammer has parallel serrations, no diamond pattern.
NOTE - I SELL TO CALIFORNIA BUYERS FOR NO ADDITIONAL CHARGE. Layaway is available for an additional $50 fee. Layaway requires 1/3 down immediately, 1/3 in 30 days & the balance in 60 days. ABSOLUTELY NO REFUND ON CANCELED OR UNCOMPLETED LAYAWAYS. The rifle will be shipped after the final payment is received.
Shipping & handling is $50.00 (CONUS only), which also covers full insurance. Shipping to Alaska & Hawaii will require an additional charge. I only ship FedEx ground fully insured. For immediate shipping US Postal Service money orders are required. Certified cashier’s checks will delay shipping 5 business days. A phone number is required to contact the issuer of a cashier's check for verification. No other forms of payment are accepted.
SOLD
Rifle Caliber: .22 Long Rifle
Manufacturer: Marlin Custom
Model: Custom 39A
Serial Number: K1204
Barrel Length: 25.5
Condition: 98%
Metal Condition: 98%
Wood Condition: 98%
Bore Condition: Pristine
Barrel Type: 1/2 octagon 1/2 round
Action: Lever
Description:
For sale is a gorgeous custom Marlin Model 39A rifle in .22LR. It features a 1/2 octagon 1/2 round 23.5” barrel stamped MARLIN FIREARMS CO on the right side, CAL. 22 L. R. on the left side. There is a small ring of engraving around the transition from octagon to round. The rear tang peep sight is a Lyman 2A-H. The barrel rear sight is a “buckhorn-type” and will flip down to allow use of the tang peep sight. It’s attached to the barrel using a dovetail slot. The front sight is a Lyman with gold bead. It’s directly attached to the barrel using a dovetail slot. The ¾ tube magazine will hold a maximum of 7 cartridges, 8 with one in the chamber. The stock and forearm appear to be very dense highly grained walnut with 20 to 21 LPI checkering. The rifle is 39.6” long and weighs 6lb 2oz. which is significantly lighter than a standard current model 39A.
Engraved or roll stamped on top of the receiver is MARLIN SAFETY inside a border with one small diamond shaped figure on each end. The top of the receiver tang is drilled and tapped for the Lyman tang sight. MODEL 39A is roll stamped between the holes. The bottom receiver tang is deeply stamped with the K1204 serial number. The bottom tang is color case hardened but not engraved.
All the color case hardened metal is conservatively and tastefully engraved including the forearm cap, both sides of the receiver, bottom of the lever and the butt plate. There’s a double border engraved around the perimeter of each side of the receiver. The butt plate engraving is located around the two screws – one on top and one on the back near the toe. The take down screw is engraved with small diamond shaped figures aligned next to each other inside a double circle border around the circumference of the screw head. Each diamond figure has a very small indention or hole in the center. The trigger, hammer and breech bolt are dark black blued without engraving. The top rear of the hammer has parallel serrations, no diamond pattern.
NOTE - I SELL TO CALIFORNIA BUYERS FOR NO ADDITIONAL CHARGE. Layaway is available for an additional $50 fee. Layaway requires 1/3 down immediately, 1/3 in 30 days & the balance in 60 days. ABSOLUTELY NO REFUND ON CANCELED OR UNCOMPLETED LAYAWAYS. The rifle will be shipped after the final payment is received.
Shipping & handling is $50.00 (CONUS only), which also covers full insurance. Shipping to Alaska & Hawaii will require an additional charge. I only ship FedEx ground fully insured. For immediate shipping US Postal Service money orders are required. Certified cashier’s checks will delay shipping 5 business days. A phone number is required to contact the issuer of a cashier's check for verification. No other forms of payment are accepted.
SOLD
Rifle Caliber: .22 Long Rifle
Manufacturer: Marlin Custom
Model: Custom 39A
Serial Number: K1204
Barrel Length: 25.5
Condition: 98%
Metal Condition: 98%
Wood Condition: 98%
Bore Condition: Pristine
Barrel Type: 1/2 octagon 1/2 round
Action: Lever
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww2
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww2
Guns International.com | V4.1 ww2