to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Springfield Armory U.S. M1871 Ward - Burton Cavalry Carbine
Springfield Armory U.S. M1871 Ward - Burton Cavalry Carbine
Click Photo to Enlarge
Guns International #: 101863745
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Chesterfield Armament
Member Since: 11/25/19
First Name: Eric
Last Name: Chandler
State:
Virginia
Zip: 23832
Country: United States
Phone:
(804) 931-1590
Active Listings: 5
Total Listings: 162
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Visa, MC, Discover, American Express
About Us: FFL with 2 locations, SOT in Chesterfield VA as Chesterfield Armament & Art and a storefront in Kilmarnock as Chandler's Firearms Estates, on Main Street. Specializing in Firearms and accessories Estates, Collectibles and Military (milsurp) firearms.
Springfield Armory U.S. M1871 Ward - Burton Cavalry Carbine
Description:
M1871 Springfield Armory Ward - Burton Cavalry Carbine
.50 / 55 / 430 Government
The Ward - Burton rifles and carbines were made at the Springfield Armory for trial purposes from February 1871 to March 1872. There were 1,011 rifles and 316 carbines made. They were not serial numbered. They are the earliest bolt actions put into service by the U.S. government. The design is from patents by Bethel Burton for the interrupted thread turn bolt and William G. Ward for the design of the extractor and ejector.
The carbines went into service in June of 1872 with the 2nd (42), 3rd (14), 6th (54) and 7th (56) Cavalry. The last ones were removed from service in September of 1875.
Three other designs were involved with the service trials. They were the Springfield Allin, Remington and Sharps. The Ward Burton was the only bolt action of the four. On May 3, 1873 the Ordinance Department officially accepted the Springfield Allin (trapdoor). The Ward – Burton came in last largely due to its unaccustomed appearance of not having an external hammer that is easily seen in assessing the status of the rifle.
The top of the bolt is marked WARD.BURTON.PATENT / DEC. 20, 1859 FEB. 21, 1871. The left side of the receiver is marked with the eagle motif and US / SPRINGFIELD 1871. The butt plate is marked with U.S. The barrel band is marked with a U. The forward underside of the trigger plate is marked with the number 38, C and X. The trigger stop screw is marked 38.
The bore is in fine condition, mostly shiny with crisp rifling. There are scattered pits that get more pronounced toward the muzzle. There is some cleaning rod erosion to the crown and the last 1/4" of rifling has thinned.
The stock has an ESA (Erskine S. Allen) cartouche on the left wrist partly obliterated by sling swivel hook wear. Behind the sling bar on the left is another banner or ribbon shaped cartouche of JWK (John W. Keene). The firing proof is visible rear of the trigger plate but is not legible. There are no cracks or missing wood but there are handling nicks, dings and scratches. A repair has been made on the top just rear of the receiver in the trough the bolt travels in.
The rear sight leaf is proper and graduated for 2, 3, 5 and 7. It has the shallow sighting notches that are proper to the 1870 carbines and rifles. The slide bar on this carbine is from a rifle and has been shortened to the proper 0.169” tall. The support screw in the top of the leaf is .092” tall. The support screw is not original but a shortened screw that was used on the Remington and Sharps Springfield made rifles. The front sight is of two piece design with a replaceable steel blade.
The safety is engaged by slightly lifting the handle and sliding the safety lever up and back so the round rod will engage a hole in the bolt handle.
Specifications Published This carbine
Overall length 41 5/16" 41 1/4"
Stock length 29 3/4" 29 7/8"
Barrel band 3 1/2" from nose 3 1/2"
Barrel length 22" 22 1/16"
Muzzle diameter 0.785" 0.783"
Rifling twist 3 groove 1 in 42" 3 groove 1 in 42"
Rear sight marking 2, 3, 5 and 7 2, 3, 5 and 7
Front sight pinned steel pinned steel
Weight - 6 lb. 13 oz.
Head space Go = .070” No Go = .075” .077”
**We Buy Firearms Estates**
SOLD
Antique: Yes
Manufacturer: Springfield Armory
Model: Model 1871
Description:
M1871 Springfield Armory Ward - Burton Cavalry Carbine
.50 / 55 / 430 Government
The Ward - Burton rifles and carbines were made at the Springfield Armory for trial purposes from February 1871 to March 1872. There were 1,011 rifles and 316 carbines made. They were not serial numbered. They are the earliest bolt actions put into service by the U.S. government. The design is from patents by Bethel Burton for the interrupted thread turn bolt and William G. Ward for the design of the extractor and ejector.
The carbines went into service in June of 1872 with the 2nd (42), 3rd (14), 6th (54) and 7th (56) Cavalry. The last ones were removed from service in September of 1875.
Three other designs were involved with the service trials. They were the Springfield Allin, Remington and Sharps. The Ward Burton was the only bolt action of the four. On May 3, 1873 the Ordinance Department officially accepted the Springfield Allin (trapdoor). The Ward – Burton came in last largely due to its unaccustomed appearance of not having an external hammer that is easily seen in assessing the status of the rifle.
The top of the bolt is marked WARD.BURTON.PATENT / DEC. 20, 1859 FEB. 21, 1871. The left side of the receiver is marked with the eagle motif and US / SPRINGFIELD 1871. The butt plate is marked with U.S. The barrel band is marked with a U. The forward underside of the trigger plate is marked with the number 38, C and X. The trigger stop screw is marked 38.
The bore is in fine condition, mostly shiny with crisp rifling. There are scattered pits that get more pronounced toward the muzzle. There is some cleaning rod erosion to the crown and the last 1/4" of rifling has thinned.
The stock has an ESA (Erskine S. Allen) cartouche on the left wrist partly obliterated by sling swivel hook wear. Behind the sling bar on the left is another banner or ribbon shaped cartouche of JWK (John W. Keene). The firing proof is visible rear of the trigger plate but is not legible. There are no cracks or missing wood but there are handling nicks, dings and scratches. A repair has been made on the top just rear of the receiver in the trough the bolt travels in.
The rear sight leaf is proper and graduated for 2, 3, 5 and 7. It has the shallow sighting notches that are proper to the 1870 carbines and rifles. The slide bar on this carbine is from a rifle and has been shortened to the proper 0.169” tall. The support screw in the top of the leaf is .092” tall. The support screw is not original but a shortened screw that was used on the Remington and Sharps Springfield made rifles. The front sight is of two piece design with a replaceable steel blade.
The safety is engaged by slightly lifting the handle and sliding the safety lever up and back so the round rod will engage a hole in the bolt handle.
Specifications Published This carbine
Overall length 41 5/16" 41 1/4"
Stock length 29 3/4" 29 7/8"
Barrel band 3 1/2" from nose 3 1/2"
Barrel length 22" 22 1/16"
Muzzle diameter 0.785" 0.783"
Rifling twist 3 groove 1 in 42" 3 groove 1 in 42"
Rear sight marking 2, 3, 5 and 7 2, 3, 5 and 7
Front sight pinned steel pinned steel
Weight - 6 lb. 13 oz.
Head space Go = .070” No Go = .075” .077”
**We Buy Firearms Estates**
SOLD
Antique: Yes
Manufacturer: Springfield Armory
Model: Model 1871
|
Click Photo to Enlarge
|
Guns International #: 101863745
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Chesterfield Armament
Member Since: 11/25/19
First Name: Eric
Last Name: Chandler
State:
Virginia
Zip: 23832
Country: United States
Phone:
(804) 931-1590
Active Listings: 5
Total Listings: 162
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Visa, MC, Discover, American Express
About Us: FFL with 2 locations, SOT in Chesterfield VA as Chesterfield Armament & Art and a storefront in Kilmarnock as Chandler's Firearms Estates, on Main Street. Specializing in Firearms and accessories Estates, Collectibles and Military (milsurp) firearms.
Springfield Armory U.S. M1871 Ward - Burton Cavalry Carbine
Description: M1871 Springfield Armory Ward - Burton Cavalry Carbine .50 / 55 / 430 Government The Ward - Burton rifles and carbines were made at the Springfield Armory for trial purposes from February 1871 to March 1872. There were 1,011 rifles and 316 carbines made. They were not serial numbered. They are the earliest bolt actions put into service by the U.S. government. The design is from patents by Bethel Burton for the interrupted thread turn bolt and William G. Ward for the design of the extractor and ejector. The carbines went into service in June of 1872 with the 2nd (42), 3rd (14), 6th (54) and 7th (56) Cavalry. The last ones were removed from service in September of 1875. Three other designs were involved with the service trials. They were the Springfield Allin, Remington and Sharps. The Ward Burton was the only bolt action of the four. On May 3, 1873 the Ordinance Department officially accepted the Springfield Allin (trapdoor). The Ward – Burton came in last largely due to its unaccustomed appearance of not having an external hammer that is easily seen in assessing the status of the rifle. The top of the bolt is marked WARD.BURTON.PATENT / DEC. 20, 1859 FEB. 21, 1871. The left side of the receiver is marked with the eagle motif and US / SPRINGFIELD 1871. The butt plate is marked with U.S. The barrel band is marked with a U. The forward underside of the trigger plate is marked with the number 38, C and X. The trigger stop screw is marked 38. The bore is in fine condition, mostly shiny with crisp rifling. There are scattered pits that get more pronounced toward the muzzle. There is some cleaning rod erosion to the crown and the last 1/4" of rifling has thinned. The stock has an ESA (Erskine S. Allen) cartouche on the left wrist partly obliterated by sling swivel hook wear. Behind the sling bar on the left is another banner or ribbon shaped cartouche of JWK (John W. Keene). The firing proof is visible rear of the trigger plate but is not legible. There are no cracks or missing wood but there are handling nicks, dings and scratches. A repair has been made on the top just rear of the receiver in the trough the bolt travels in. The rear sight leaf is proper and graduated for 2, 3, 5 and 7. It has the shallow sighting notches that are proper to the 1870 carbines and rifles. The slide bar on this carbine is from a rifle and has been shortened to the proper 0.169” tall. The support screw in the top of the leaf is .092” tall. The support screw is not original but a shortened screw that was used on the Remington and Sharps Springfield made rifles. The front sight is of two piece design with a replaceable steel blade. The safety is engaged by slightly lifting the handle and sliding the safety lever up and back so the round rod will engage a hole in the bolt handle. Specifications Published This carbine Overall length 41 5/16" 41 1/4" Stock length 29 3/4" 29 7/8" Barrel band 3 1/2" from nose 3 1/2" Barrel length 22" 22 1/16" Muzzle diameter 0.785" 0.783" Rifling twist 3 groove 1 in 42" 3 groove 1 in 42" Rear sight marking 2, 3, 5 and 7 2, 3, 5 and 7 Front sight pinned steel pinned steel Weight - 6 lb. 13 oz. Head space Go = .070” No Go = .075” .077” **We Buy Firearms Estates** SOLD Antique: Yes Manufacturer: Springfield Armory Model: Model 1871 |
Click Photo to Enlarge
Guns International #: 101863745
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Chesterfield Armament
Member Since: 11/25/19
First Name: Eric
Last Name: Chandler
State:
Virginia
Zip: 23832
Country: United States
Phone:
(804) 931-1590
Active Listings: 5
Total Listings: 162
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Visa, MC, Discover, American Express
About Us: FFL with 2 locations, SOT in Chesterfield VA as Chesterfield Armament & Art and a storefront in Kilmarnock as Chandler's Firearms Estates, on Main Street. Specializing in Firearms and accessories Estates, Collectibles and Military (milsurp) firearms.
Springfield Armory U.S. M1871 Ward - Burton Cavalry Carbine
Description:
M1871 Springfield Armory Ward - Burton Cavalry Carbine
.50 / 55 / 430 Government
The Ward - Burton rifles and carbines were made at the Springfield Armory for trial purposes from February 1871 to March 1872. There were 1,011 rifles and 316 carbines made. They were not serial numbered. They are the earliest bolt actions put into service by the U.S. government. The design is from patents by Bethel Burton for the interrupted thread turn bolt and William G. Ward for the design of the extractor and ejector.
The carbines went into service in June of 1872 with the 2nd (42), 3rd (14), 6th (54) and 7th (56) Cavalry. The last ones were removed from service in September of 1875.
Three other designs were involved with the service trials. They were the Springfield Allin, Remington and Sharps. The Ward Burton was the only bolt action of the four. On May 3, 1873 the Ordinance Department officially accepted the Springfield Allin (trapdoor). The Ward – Burton came in last largely due to its unaccustomed appearance of not having an external hammer that is easily seen in assessing the status of the rifle.
The top of the bolt is marked WARD.BURTON.PATENT / DEC. 20, 1859 FEB. 21, 1871. The left side of the receiver is marked with the eagle motif and US / SPRINGFIELD 1871. The butt plate is marked with U.S. The barrel band is marked with a U. The forward underside of the trigger plate is marked with the number 38, C and X. The trigger stop screw is marked 38.
The bore is in fine condition, mostly shiny with crisp rifling. There are scattered pits that get more pronounced toward the muzzle. There is some cleaning rod erosion to the crown and the last 1/4" of rifling has thinned.
The stock has an ESA (Erskine S. Allen) cartouche on the left wrist partly obliterated by sling swivel hook wear. Behind the sling bar on the left is another banner or ribbon shaped cartouche of JWK (John W. Keene). The firing proof is visible rear of the trigger plate but is not legible. There are no cracks or missing wood but there are handling nicks, dings and scratches. A repair has been made on the top just rear of the receiver in the trough the bolt travels in.
The rear sight leaf is proper and graduated for 2, 3, 5 and 7. It has the shallow sighting notches that are proper to the 1870 carbines and rifles. The slide bar on this carbine is from a rifle and has been shortened to the proper 0.169” tall. The support screw in the top of the leaf is .092” tall. The support screw is not original but a shortened screw that was used on the Remington and Sharps Springfield made rifles. The front sight is of two piece design with a replaceable steel blade.
The safety is engaged by slightly lifting the handle and sliding the safety lever up and back so the round rod will engage a hole in the bolt handle.
Specifications Published This carbine
Overall length 41 5/16" 41 1/4"
Stock length 29 3/4" 29 7/8"
Barrel band 3 1/2" from nose 3 1/2"
Barrel length 22" 22 1/16"
Muzzle diameter 0.785" 0.783"
Rifling twist 3 groove 1 in 42" 3 groove 1 in 42"
Rear sight marking 2, 3, 5 and 7 2, 3, 5 and 7
Front sight pinned steel pinned steel
Weight - 6 lb. 13 oz.
Head space Go = .070” No Go = .075” .077”
**We Buy Firearms Estates**
SOLD
Antique: Yes
Manufacturer: Springfield Armory
Model: Model 1871
Description:
M1871 Springfield Armory Ward - Burton Cavalry Carbine
.50 / 55 / 430 Government
The Ward - Burton rifles and carbines were made at the Springfield Armory for trial purposes from February 1871 to March 1872. There were 1,011 rifles and 316 carbines made. They were not serial numbered. They are the earliest bolt actions put into service by the U.S. government. The design is from patents by Bethel Burton for the interrupted thread turn bolt and William G. Ward for the design of the extractor and ejector.
The carbines went into service in June of 1872 with the 2nd (42), 3rd (14), 6th (54) and 7th (56) Cavalry. The last ones were removed from service in September of 1875.
Three other designs were involved with the service trials. They were the Springfield Allin, Remington and Sharps. The Ward Burton was the only bolt action of the four. On May 3, 1873 the Ordinance Department officially accepted the Springfield Allin (trapdoor). The Ward – Burton came in last largely due to its unaccustomed appearance of not having an external hammer that is easily seen in assessing the status of the rifle.
The top of the bolt is marked WARD.BURTON.PATENT / DEC. 20, 1859 FEB. 21, 1871. The left side of the receiver is marked with the eagle motif and US / SPRINGFIELD 1871. The butt plate is marked with U.S. The barrel band is marked with a U. The forward underside of the trigger plate is marked with the number 38, C and X. The trigger stop screw is marked 38.
The bore is in fine condition, mostly shiny with crisp rifling. There are scattered pits that get more pronounced toward the muzzle. There is some cleaning rod erosion to the crown and the last 1/4" of rifling has thinned.
The stock has an ESA (Erskine S. Allen) cartouche on the left wrist partly obliterated by sling swivel hook wear. Behind the sling bar on the left is another banner or ribbon shaped cartouche of JWK (John W. Keene). The firing proof is visible rear of the trigger plate but is not legible. There are no cracks or missing wood but there are handling nicks, dings and scratches. A repair has been made on the top just rear of the receiver in the trough the bolt travels in.
The rear sight leaf is proper and graduated for 2, 3, 5 and 7. It has the shallow sighting notches that are proper to the 1870 carbines and rifles. The slide bar on this carbine is from a rifle and has been shortened to the proper 0.169” tall. The support screw in the top of the leaf is .092” tall. The support screw is not original but a shortened screw that was used on the Remington and Sharps Springfield made rifles. The front sight is of two piece design with a replaceable steel blade.
The safety is engaged by slightly lifting the handle and sliding the safety lever up and back so the round rod will engage a hole in the bolt handle.
Specifications Published This carbine
Overall length 41 5/16" 41 1/4"
Stock length 29 3/4" 29 7/8"
Barrel band 3 1/2" from nose 3 1/2"
Barrel length 22" 22 1/16"
Muzzle diameter 0.785" 0.783"
Rifling twist 3 groove 1 in 42" 3 groove 1 in 42"
Rear sight marking 2, 3, 5 and 7 2, 3, 5 and 7
Front sight pinned steel pinned steel
Weight - 6 lb. 13 oz.
Head space Go = .070” No Go = .075” .077”
**We Buy Firearms Estates**
SOLD
Antique: Yes
Manufacturer: Springfield Armory
Model: Model 1871
Guns International #: 101863745
Guns International #: 101863745
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Chesterfield Armament
Member Since: 11/25/19
First Name: Eric
Last Name: Chandler
State:
Virginia
Zip: 23832
Country: United States
Phone:
(804) 931-1590
Active Listings: 5
Total Listings: 162
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Visa, MC, Discover, American Express
About Us: FFL with 2 locations, SOT in Chesterfield VA as Chesterfield Armament & Art and a storefront in Kilmarnock as Chandler's Firearms Estates, on Main Street. Specializing in Firearms and accessories Estates, Collectibles and Military (milsurp) firearms.
Springfield Armory U.S. M1871 Ward - Burton Cavalry Carbine
Description:
M1871 Springfield Armory Ward - Burton Cavalry Carbine
.50 / 55 / 430 Government
The Ward - Burton rifles and carbines were made at the Springfield Armory for trial purposes from February 1871 to March 1872. There were 1,011 rifles and 316 carbines made. They were not serial numbered. They are the earliest bolt actions put into service by the U.S. government. The design is from patents by Bethel Burton for the interrupted thread turn bolt and William G. Ward for the design of the extractor and ejector.
The carbines went into service in June of 1872 with the 2nd (42), 3rd (14), 6th (54) and 7th (56) Cavalry. The last ones were removed from service in September of 1875.
Three other designs were involved with the service trials. They were the Springfield Allin, Remington and Sharps. The Ward Burton was the only bolt action of the four. On May 3, 1873 the Ordinance Department officially accepted the Springfield Allin (trapdoor). The Ward – Burton came in last largely due to its unaccustomed appearance of not having an external hammer that is easily seen in assessing the status of the rifle.
The top of the bolt is marked WARD.BURTON.PATENT / DEC. 20, 1859 FEB. 21, 1871. The left side of the receiver is marked with the eagle motif and US / SPRINGFIELD 1871. The butt plate is marked with U.S. The barrel band is marked with a U. The forward underside of the trigger plate is marked with the number 38, C and X. The trigger stop screw is marked 38.
The bore is in fine condition, mostly shiny with crisp rifling. There are scattered pits that get more pronounced toward the muzzle. There is some cleaning rod erosion to the crown and the last 1/4" of rifling has thinned.
The stock has an ESA (Erskine S. Allen) cartouche on the left wrist partly obliterated by sling swivel hook wear. Behind the sling bar on the left is another banner or ribbon shaped cartouche of JWK (John W. Keene). The firing proof is visible rear of the trigger plate but is not legible. There are no cracks or missing wood but there are handling nicks, dings and scratches. A repair has been made on the top just rear of the receiver in the trough the bolt travels in.
The rear sight leaf is proper and graduated for 2, 3, 5 and 7. It has the shallow sighting notches that are proper to the 1870 carbines and rifles. The slide bar on this carbine is from a rifle and has been shortened to the proper 0.169” tall. The support screw in the top of the leaf is .092” tall. The support screw is not original but a shortened screw that was used on the Remington and Sharps Springfield made rifles. The front sight is of two piece design with a replaceable steel blade.
The safety is engaged by slightly lifting the handle and sliding the safety lever up and back so the round rod will engage a hole in the bolt handle.
Specifications Published This carbine
Overall length 41 5/16" 41 1/4"
Stock length 29 3/4" 29 7/8"
Barrel band 3 1/2" from nose 3 1/2"
Barrel length 22" 22 1/16"
Muzzle diameter 0.785" 0.783"
Rifling twist 3 groove 1 in 42" 3 groove 1 in 42"
Rear sight marking 2, 3, 5 and 7 2, 3, 5 and 7
Front sight pinned steel pinned steel
Weight - 6 lb. 13 oz.
Head space Go = .070” No Go = .075” .077”
**We Buy Firearms Estates**
SOLD
Antique: Yes
Manufacturer: Springfield Armory
Model: Model 1871
Description:
M1871 Springfield Armory Ward - Burton Cavalry Carbine
.50 / 55 / 430 Government
The Ward - Burton rifles and carbines were made at the Springfield Armory for trial purposes from February 1871 to March 1872. There were 1,011 rifles and 316 carbines made. They were not serial numbered. They are the earliest bolt actions put into service by the U.S. government. The design is from patents by Bethel Burton for the interrupted thread turn bolt and William G. Ward for the design of the extractor and ejector.
The carbines went into service in June of 1872 with the 2nd (42), 3rd (14), 6th (54) and 7th (56) Cavalry. The last ones were removed from service in September of 1875.
Three other designs were involved with the service trials. They were the Springfield Allin, Remington and Sharps. The Ward Burton was the only bolt action of the four. On May 3, 1873 the Ordinance Department officially accepted the Springfield Allin (trapdoor). The Ward – Burton came in last largely due to its unaccustomed appearance of not having an external hammer that is easily seen in assessing the status of the rifle.
The top of the bolt is marked WARD.BURTON.PATENT / DEC. 20, 1859 FEB. 21, 1871. The left side of the receiver is marked with the eagle motif and US / SPRINGFIELD 1871. The butt plate is marked with U.S. The barrel band is marked with a U. The forward underside of the trigger plate is marked with the number 38, C and X. The trigger stop screw is marked 38.
The bore is in fine condition, mostly shiny with crisp rifling. There are scattered pits that get more pronounced toward the muzzle. There is some cleaning rod erosion to the crown and the last 1/4" of rifling has thinned.
The stock has an ESA (Erskine S. Allen) cartouche on the left wrist partly obliterated by sling swivel hook wear. Behind the sling bar on the left is another banner or ribbon shaped cartouche of JWK (John W. Keene). The firing proof is visible rear of the trigger plate but is not legible. There are no cracks or missing wood but there are handling nicks, dings and scratches. A repair has been made on the top just rear of the receiver in the trough the bolt travels in.
The rear sight leaf is proper and graduated for 2, 3, 5 and 7. It has the shallow sighting notches that are proper to the 1870 carbines and rifles. The slide bar on this carbine is from a rifle and has been shortened to the proper 0.169” tall. The support screw in the top of the leaf is .092” tall. The support screw is not original but a shortened screw that was used on the Remington and Sharps Springfield made rifles. The front sight is of two piece design with a replaceable steel blade.
The safety is engaged by slightly lifting the handle and sliding the safety lever up and back so the round rod will engage a hole in the bolt handle.
Specifications Published This carbine
Overall length 41 5/16" 41 1/4"
Stock length 29 3/4" 29 7/8"
Barrel band 3 1/2" from nose 3 1/2"
Barrel length 22" 22 1/16"
Muzzle diameter 0.785" 0.783"
Rifling twist 3 groove 1 in 42" 3 groove 1 in 42"
Rear sight marking 2, 3, 5 and 7 2, 3, 5 and 7
Front sight pinned steel pinned steel
Weight - 6 lb. 13 oz.
Head space Go = .070” No Go = .075” .077”
**We Buy Firearms Estates**
SOLD
Antique: Yes
Manufacturer: Springfield Armory
Model: Model 1871
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3