Guns International #: 102965959
Seller's Inventory #: 482778

Category - Remington Shotguns - 870 - Remington Shotguns - Pump

Category
Remington Shotguns - 870
Remington Shotguns - Pump

REMINGTON 870 12 GA

Description:
Guns Listing ID: 482778



Good condition Remington model 870!
Minor surface rust as shown in pics that will probably disappear with a little elbow grease and Rem oil.
Currently, it has the Remington MOD choke in it.
Perfect affordable 12ga shotgun for hunting or home defense.
Nice addition to any collection.

The Remington 870 was the fourth major design in a series of Remington pump shotguns. John Pedersen designed the fragile Remington Model 10 (and later the improved Remington Model 29). John Browning designed the Remington Model 17 (which was later adapted by Ithaca into the Ithaca 37), which served as the basis for the Remington 31. The Model 31 was marketed as the “ball-bearing repeater” and was well-received, but its many machined and handfitted parts made the gun expensive to manufacture. Consequently, it struggled in sales compared to the Winchester Model 12. To achieve better sales, Remington produced the Model 870 in 1950, which was more modern and reliable in its construction, easy to take apart and maintain, and relatively inexpensive.[5][6]

The 870 was a commercial success. Remington sold two million guns by 1973 (ten times the number of Model 31 shotguns it replaced). As of 1983, the 870 held the record for the best-selling shotgun in history, with three million sold.[7] By 1996, spurred by sales of the basic \"Express\" models, which were added as a lower-cost alternative to the original Wingmaster line, sales topped seven million guns. On April 13, 2009, the ten millionth Model 870 was produced.[8]

Design details
The 870 features a bottom-loading, side ejecting receiver and a tubular magazine under the barrel. The gun comes with a plug for migratory bird hunting which reduces the magazine‚‚s capacity to two[9] rounds. It has dual action bars, internal hammer, and a bolt which locks into an extension in the barrel. The action, receiver, fire control group, safety catch and slide release catch of the Remington Model 870 shotgun are similar to those used on the Remington Model 7600 series pump-action centerfire rifles and carbines. The basic fire control group design was first used in the automatic 11–48.[10] Twelve gauge stocks will also interchange on the older 12-gauge-sized 20-gauge receivers, although modification is needed to fit the smaller sized 20-gauge receivers employed since the late 1970s. Several parts of the 870, such as buttstocks and magazine tubes, will interchange with the semi-automatic Remington 1100 and 11–87.[11]

The original 870 models were offered with fixed chokes. In 1986 Remington introduced the new Remington \"Rem Choke\" system of screw-in chokes (also fitted to Remington model 1100 auto-loading shotguns at the same time). Initially, the Rem Chokes were offered only in 12 gauge in barrel lengths of 21, 26 and 28 in (530, 660 and 710 mm). The following year the availability was expanded to the 20 gauge and included other barrel lengths.[12]

The 870‚‚s production for over 30 years had a design flaw whereby a user could fail to press a shell all the way into the magazine when loading – so that the shell latch did not engage the shell – which could result in tying up the gun. This was caused by the shell slipping out of the magazine under the bolt in the receiver to bind the action, requiring rough treatment of the action or even disassembly. The potential issue was resolved with the introduction of the \"Flexi Tab\" carrier. Guns with this modification can be identified by the U-shaped cut-out on the carrier, visible from below the gun. The cut-out, combined with modified machining on the underside of the slide assembly, allows the action to be opened with a shell on the carrier.

0125O

SOLD

Manufacturer: REMINGTON
Model: 870
Caliber Info: 12 GA
Condition: Used - Non-Certified
Barrels: 26
Finish: black and wood