to Favorites
1 of 14
2 of 14
3 of 14
4 of 14
5 of 14
6 of 14
7 of 14
8 of 14
9 of 14
10 of 14
11 of 14
12 of 14
13 of 14
14 of 14
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Winchester Model 21 20 gauge..game scene engraved and gold inlaid by Master Bill Mains for sale
Winchester Model 21 20 gauge..game scene engraved and gold inlaid by Master Bill Mains for sale
Click Photo to Enlarge
Guns International #: 102845585
Seller's Inventory #: 11027
Winchester Model 21 20 gauge..game scene engraved and gold inlaid by Master Bill Mains
Description:
Winchester Model 21 SKEET SxS shotgun. 20 gauge, 26" solid rib barrels choked WS1 & WS2 or as I refer to it: Bird 1 & Bird 2 since that choke configuration has proven ideal for upland bird hunting!
As you saw in the photos this is a very special Model 21 as it was profusely and expertly engraved by none other than Bill Mains. If you do not recognize the name, Bill Mains was a well-known master gun engraver until his passing in 2012. Bill was the factory engraver for Colt from 1967 - 1972 and is attributed to having engraved more 2nd generation Colt Single Action Army revolvers than any other engraver! His signature on those SAA's was a stamped buffalo under the cylinder pin. Why a buffalo? He was working out of Buffalo, NY at the time. He was also well know as the engraver of Ithaca "E" single barrel trap guns for the last seven years of their production.
After that he lived in Las Vegas and engraved guns for many famous entertainment and sports celebrities.
The engraving on this 21 is of gold inlaid woodcocks on each side in a very interesting gold wire vignette; a gold inlaid pointing dog on the bottom and a gold inlaid grouse on the trigger guard with both being defined by a similar gold wire border. The rest of the receiver and chamber area of the barrels is covered in a distinctive patter of oak leaves. All of Mr. Main's engraving makes this a one-of-a-kind, bespoke Model 21.
The SKEET grade pistol grip stock has a 13 7/8" LOP to the checkered butt; 1 1/2" DAC and 2 3/8" DAH with neutral cast. The matching beavertail forearm is from a rather unique piece of Walnut in as much as the back half of the forearm is inherently very dark!
The gun weighs 6lbs. 8oz.
The gun has been used, hunted with and showing small signs of use. On very close inspection you will see a small repair on the bottom, left, front corner of the stock along with some finish flakes so I will grade the wood at 95%. The metal looks quite good at first, then with the aid of a strong light you can see some very faint surface blemishes just ahead of the engraving on the left side of the barrels; grade: 95-97%.
SN: 11027
Price: $13,750.00
Description:
Winchester Model 21 SKEET SxS shotgun. 20 gauge, 26" solid rib barrels choked WS1 & WS2 or as I refer to it: Bird 1 & Bird 2 since that choke configuration has proven ideal for upland bird hunting!
As you saw in the photos this is a very special Model 21 as it was profusely and expertly engraved by none other than Bill Mains. If you do not recognize the name, Bill Mains was a well-known master gun engraver until his passing in 2012. Bill was the factory engraver for Colt from 1967 - 1972 and is attributed to having engraved more 2nd generation Colt Single Action Army revolvers than any other engraver! His signature on those SAA's was a stamped buffalo under the cylinder pin. Why a buffalo? He was working out of Buffalo, NY at the time. He was also well know as the engraver of Ithaca "E" single barrel trap guns for the last seven years of their production.
After that he lived in Las Vegas and engraved guns for many famous entertainment and sports celebrities.
The engraving on this 21 is of gold inlaid woodcocks on each side in a very interesting gold wire vignette; a gold inlaid pointing dog on the bottom and a gold inlaid grouse on the trigger guard with both being defined by a similar gold wire border. The rest of the receiver and chamber area of the barrels is covered in a distinctive patter of oak leaves. All of Mr. Main's engraving makes this a one-of-a-kind, bespoke Model 21.
The SKEET grade pistol grip stock has a 13 7/8" LOP to the checkered butt; 1 1/2" DAC and 2 3/8" DAH with neutral cast. The matching beavertail forearm is from a rather unique piece of Walnut in as much as the back half of the forearm is inherently very dark!
The gun weighs 6lbs. 8oz.
The gun has been used, hunted with and showing small signs of use. On very close inspection you will see a small repair on the bottom, left, front corner of the stock along with some finish flakes so I will grade the wood at 95%. The metal looks quite good at first, then with the aid of a strong light you can see some very faint surface blemishes just ahead of the engraving on the left side of the barrels; grade: 95-97%.
SN: 11027
Price: $13,750.00
Contact Seller
|
Click Photo to Enlarge
|
Guns International #: 102845585
Winchester Model 21 20 gauge..game scene engraved and gold inlaid by Master Bill Mains
Description: Winchester Model 21 SKEET SxS shotgun. 20 gauge, 26" solid rib barrels choked WS1 & WS2 or as I refer to it: Bird 1 & Bird 2 since that choke configuration has proven ideal for upland bird hunting! As you saw in the photos this is a very special Model 21 as it was profusely and expertly engraved by none other than Bill Mains. If you do not recognize the name, Bill Mains was a well-known master gun engraver until his passing in 2012. Bill was the factory engraver for Colt from 1967 - 1972 and is attributed to having engraved more 2nd generation Colt Single Action Army revolvers than any other engraver! His signature on those SAA's was a stamped buffalo under the cylinder pin. Why a buffalo? He was working out of Buffalo, NY at the time. He was also well know as the engraver of Ithaca "E" single barrel trap guns for the last seven years of their production. After that he lived in Las Vegas and engraved guns for many famous entertainment and sports celebrities. The engraving on this 21 is of gold inlaid woodcocks on each side in a very interesting gold wire vignette; a gold inlaid pointing dog on the bottom and a gold inlaid grouse on the trigger guard with both being defined by a similar gold wire border. The rest of the receiver and chamber area of the barrels is covered in a distinctive patter of oak leaves. All of Mr. Main's engraving makes this a one-of-a-kind, bespoke Model 21. The SKEET grade pistol grip stock has a 13 7/8" LOP to the checkered butt; 1 1/2" DAC and 2 3/8" DAH with neutral cast. The matching beavertail forearm is from a rather unique piece of Walnut in as much as the back half of the forearm is inherently very dark! The gun weighs 6lbs. 8oz. The gun has been used, hunted with and showing small signs of use. On very close inspection you will see a small repair on the bottom, left, front corner of the stock along with some finish flakes so I will grade the wood at 95%. The metal looks quite good at first, then with the aid of a strong light you can see some very faint surface blemishes just ahead of the engraving on the left side of the barrels; grade: 95-97%. SN: 11027 Price: $13,750.00 Contact Seller |
Click Photo to Enlarge
Guns International #: 102845585
Seller's Inventory #: 11027
Winchester Model 21 20 gauge..game scene engraved and gold inlaid by Master Bill Mains
Description:
Winchester Model 21 SKEET SxS shotgun. 20 gauge, 26" solid rib barrels choked WS1 & WS2 or as I refer to it: Bird 1 & Bird 2 since that choke configuration has proven ideal for upland bird hunting!
As you saw in the photos this is a very special Model 21 as it was profusely and expertly engraved by none other than Bill Mains. If you do not recognize the name, Bill Mains was a well-known master gun engraver until his passing in 2012. Bill was the factory engraver for Colt from 1967 - 1972 and is attributed to having engraved more 2nd generation Colt Single Action Army revolvers than any other engraver! His signature on those SAA's was a stamped buffalo under the cylinder pin. Why a buffalo? He was working out of Buffalo, NY at the time. He was also well know as the engraver of Ithaca "E" single barrel trap guns for the last seven years of their production.
After that he lived in Las Vegas and engraved guns for many famous entertainment and sports celebrities.
The engraving on this 21 is of gold inlaid woodcocks on each side in a very interesting gold wire vignette; a gold inlaid pointing dog on the bottom and a gold inlaid grouse on the trigger guard with both being defined by a similar gold wire border. The rest of the receiver and chamber area of the barrels is covered in a distinctive patter of oak leaves. All of Mr. Main's engraving makes this a one-of-a-kind, bespoke Model 21.
The SKEET grade pistol grip stock has a 13 7/8" LOP to the checkered butt; 1 1/2" DAC and 2 3/8" DAH with neutral cast. The matching beavertail forearm is from a rather unique piece of Walnut in as much as the back half of the forearm is inherently very dark!
The gun weighs 6lbs. 8oz.
The gun has been used, hunted with and showing small signs of use. On very close inspection you will see a small repair on the bottom, left, front corner of the stock along with some finish flakes so I will grade the wood at 95%. The metal looks quite good at first, then with the aid of a strong light you can see some very faint surface blemishes just ahead of the engraving on the left side of the barrels; grade: 95-97%.
SN: 11027
Price: $13,750.00
Description:
Winchester Model 21 SKEET SxS shotgun. 20 gauge, 26" solid rib barrels choked WS1 & WS2 or as I refer to it: Bird 1 & Bird 2 since that choke configuration has proven ideal for upland bird hunting!
As you saw in the photos this is a very special Model 21 as it was profusely and expertly engraved by none other than Bill Mains. If you do not recognize the name, Bill Mains was a well-known master gun engraver until his passing in 2012. Bill was the factory engraver for Colt from 1967 - 1972 and is attributed to having engraved more 2nd generation Colt Single Action Army revolvers than any other engraver! His signature on those SAA's was a stamped buffalo under the cylinder pin. Why a buffalo? He was working out of Buffalo, NY at the time. He was also well know as the engraver of Ithaca "E" single barrel trap guns for the last seven years of their production.
After that he lived in Las Vegas and engraved guns for many famous entertainment and sports celebrities.
The engraving on this 21 is of gold inlaid woodcocks on each side in a very interesting gold wire vignette; a gold inlaid pointing dog on the bottom and a gold inlaid grouse on the trigger guard with both being defined by a similar gold wire border. The rest of the receiver and chamber area of the barrels is covered in a distinctive patter of oak leaves. All of Mr. Main's engraving makes this a one-of-a-kind, bespoke Model 21.
The SKEET grade pistol grip stock has a 13 7/8" LOP to the checkered butt; 1 1/2" DAC and 2 3/8" DAH with neutral cast. The matching beavertail forearm is from a rather unique piece of Walnut in as much as the back half of the forearm is inherently very dark!
The gun weighs 6lbs. 8oz.
The gun has been used, hunted with and showing small signs of use. On very close inspection you will see a small repair on the bottom, left, front corner of the stock along with some finish flakes so I will grade the wood at 95%. The metal looks quite good at first, then with the aid of a strong light you can see some very faint surface blemishes just ahead of the engraving on the left side of the barrels; grade: 95-97%.
SN: 11027
Price: $13,750.00
Guns International #: 102845585
Seller's Inventory #: 11027
Guns International #: 102845585
Seller's Inventory #: 11027
Winchester Model 21 20 gauge..game scene engraved and gold inlaid by Master Bill Mains
Description:
Winchester Model 21 SKEET SxS shotgun. 20 gauge, 26" solid rib barrels choked WS1 & WS2 or as I refer to it: Bird 1 & Bird 2 since that choke configuration has proven ideal for upland bird hunting!
As you saw in the photos this is a very special Model 21 as it was profusely and expertly engraved by none other than Bill Mains. If you do not recognize the name, Bill Mains was a well-known master gun engraver until his passing in 2012. Bill was the factory engraver for Colt from 1967 - 1972 and is attributed to having engraved more 2nd generation Colt Single Action Army revolvers than any other engraver! His signature on those SAA's was a stamped buffalo under the cylinder pin. Why a buffalo? He was working out of Buffalo, NY at the time. He was also well know as the engraver of Ithaca "E" single barrel trap guns for the last seven years of their production.
After that he lived in Las Vegas and engraved guns for many famous entertainment and sports celebrities.
The engraving on this 21 is of gold inlaid woodcocks on each side in a very interesting gold wire vignette; a gold inlaid pointing dog on the bottom and a gold inlaid grouse on the trigger guard with both being defined by a similar gold wire border. The rest of the receiver and chamber area of the barrels is covered in a distinctive patter of oak leaves. All of Mr. Main's engraving makes this a one-of-a-kind, bespoke Model 21.
The SKEET grade pistol grip stock has a 13 7/8" LOP to the checkered butt; 1 1/2" DAC and 2 3/8" DAH with neutral cast. The matching beavertail forearm is from a rather unique piece of Walnut in as much as the back half of the forearm is inherently very dark!
The gun weighs 6lbs. 8oz.
The gun has been used, hunted with and showing small signs of use. On very close inspection you will see a small repair on the bottom, left, front corner of the stock along with some finish flakes so I will grade the wood at 95%. The metal looks quite good at first, then with the aid of a strong light you can see some very faint surface blemishes just ahead of the engraving on the left side of the barrels; grade: 95-97%.
SN: 11027
Price: $13,750.00
Description:
Winchester Model 21 SKEET SxS shotgun. 20 gauge, 26" solid rib barrels choked WS1 & WS2 or as I refer to it: Bird 1 & Bird 2 since that choke configuration has proven ideal for upland bird hunting!
As you saw in the photos this is a very special Model 21 as it was profusely and expertly engraved by none other than Bill Mains. If you do not recognize the name, Bill Mains was a well-known master gun engraver until his passing in 2012. Bill was the factory engraver for Colt from 1967 - 1972 and is attributed to having engraved more 2nd generation Colt Single Action Army revolvers than any other engraver! His signature on those SAA's was a stamped buffalo under the cylinder pin. Why a buffalo? He was working out of Buffalo, NY at the time. He was also well know as the engraver of Ithaca "E" single barrel trap guns for the last seven years of their production.
After that he lived in Las Vegas and engraved guns for many famous entertainment and sports celebrities.
The engraving on this 21 is of gold inlaid woodcocks on each side in a very interesting gold wire vignette; a gold inlaid pointing dog on the bottom and a gold inlaid grouse on the trigger guard with both being defined by a similar gold wire border. The rest of the receiver and chamber area of the barrels is covered in a distinctive patter of oak leaves. All of Mr. Main's engraving makes this a one-of-a-kind, bespoke Model 21.
The SKEET grade pistol grip stock has a 13 7/8" LOP to the checkered butt; 1 1/2" DAC and 2 3/8" DAH with neutral cast. The matching beavertail forearm is from a rather unique piece of Walnut in as much as the back half of the forearm is inherently very dark!
The gun weighs 6lbs. 8oz.
The gun has been used, hunted with and showing small signs of use. On very close inspection you will see a small repair on the bottom, left, front corner of the stock along with some finish flakes so I will grade the wood at 95%. The metal looks quite good at first, then with the aid of a strong light you can see some very faint surface blemishes just ahead of the engraving on the left side of the barrels; grade: 95-97%.
SN: 11027
Price: $13,750.00
Contact Seller
Buy Now
Pay with GunTab
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww2
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww2
Guns International.com | V4.1 ww2