Griffin & Howe Gunsmithing Scopes and Mounts
Guns International #: 100807891 Seller's Inventory #:
Category: Gunsmithing -
When emailing or calling sellers direct, please mention that you saw their listing on GunsInternational.com
Seller: Griffin & Howe
Company: Griffin & Howe
Member Since: 10/24/08
State: New Jersey
Country: United States
Phone: (973) 398-2670
Seller: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns.
3 days, Cancellations and Returns may be subject to a re-stocking charge.
Payment Types Accepted: Visa, MC, AMEX, Check, Cashiers and Money Order
Scopes and Mounts and Pads :
Scope Mount Systems
The Griffin & Howe scope mount systems have been the proven, quick-detachable systems that return to zero every time. Our Sidemounts and Topmounts have been the choice of serious sport hunters for over 70 years. Our Garand mounts, originally made for sniper scope use under contract to all the U.S. Armed Forces, are still popular with today's shooter.
TOPMOUNT custom made and installed only by Griffin & Howe
• with 1" rings $850.00
• with 30mm rings $950.00
• extra pair 1" rings $450.00
• extra pair 30mm rings $550.00
SIDEMOUNT with STANDARD OR HIGH RINGS supplied with pins and screws
*Note: Some adjustment and fitting to existing base will be required.
Griffin & Howe SIDEMOUNT Installation Instructions
Installation should be done only by a competent gunsmith.
Remove base and mill a radius in it to match the contour of the action. Clamp scope and mount to the action in desired position, aligning for parallelism, perpendicularity, clearance and location as above; then reboresight. In the set clamped position, drill 2 holes for #0 tapered pins with a #298 drill through base and action (see drawing for location) and ream holes with #0 tapered reamer and insert pins.
Drill 3 holes with #21 drill through base and action (see drawing). Remove base and tap the 3 holes in action with a 10-32 tap.
Enlarge screw holes in base with #10 drill; then counterbore the holes so screw heads will seat flush when assembled. Trim any excess material from the bottom of the base, remove all burrs from base and action. Assemble base to action, fitting 2 pins and tightening 3 screws securely. Grind off any ends of screws and pins that protrude inside or outside of the action. Polish and reblue as necessary
G & H Recoil Pads
This traditional style recoil pad has been associated with best quality guns for decades. As attractive as it is functional, its classic design effectively absorbs recoil.
Pad only: $35.00
Our gunsmiths will furnish and expertly fit the pad pictured to your rifle or shotgun: $225.00
Griffin & Howe English style pad, rounded and leather covered $350.00
Griffin & Howe Purdey style pigskin covered pad $475.00
Price: See Above