The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
A complete American walnut H&R Reising butt-stock of american walnut with solid wood, and blued steel trigger guard, and a well fitted butt-plate of metal and the Savage maker name. These st
...Click for more info
This Winchester manufactured brass carrier block is for the model 1873 lever action rifle in 32-20 caliber and is in very good condition with some tarnish, dings and honest wear. The caliber marking o
...Click for more info
All steel 2 piece bases #45157 and medium height rings #45338. All in matte silver finish for one inch scope. New in original packaging.
...Click for more info
AR-15 .22 upper with 14.5" barrel in like new condition. Call Bill at RW Outdoors with any questions at 406-842-5271. Shipping included.
...Click for more info
This is a product made for people who want a steady shot on their rifle without any kind of bulky bi-pods or stands. It is designed to grip a surface so you can steady your shot to improve accuracy, e
...Click for more info
1. 2 magazine tube mounts for model 1890 octagon barrel winchesters. $30.00
2. Misc parts for Winchester Model 69 bolt action $25.00.
$9.50 insured, priority shipping, Check or mone
...Click for more info
From Left to right
1. Unmarked wood grain. 3 11/16" hole spacing, 1 7/8" wide, 5 3/8" long.
2. Remington 3" hole spacing, 1 5/8" wide, 5 1/8" long.
3. 4 Screw Ea
...Click for more info
1. Hook type sling eyes for delux Winchesters. New, matt finish. W/ installation instructions. $25.00
2. A" type, pre 64 extractor w/bolt ring. ( came from a 30-06 bolt) $65.00
3.
...Click for more info
30rd Magazine Springs Enhanced, Colt M16 Rifle 5.56mm. Increased power/extended load life. See photos for condition and call Bill at RW Outdoors with any questions at 406-842-5271. Shipping included.
...Click for more info
stock was remover from a post 64 Winchester model 70 it is someones attempt to make a stock and preserve the factory stock. It is serviceable could use some finish and recutting the checkering.THIS is
...Click for more info
Utility Grip Caps
1 5/8" X1 1/16"
The Finest Quality Reproduction Urethane Grip Caps.
Our New Molding Technology Produces Mirror Perfect Reproductions
From Original Grip Caps in Fact
...Click for more info
UPDATE: 4/23/2024 . . . I will ship this free of charge to the lower 48 states only.
There is a link to G&H # 921 in 7 m/m which had this same style plate. If you want t see it, just emai
...Click for more info
Manufacturer: Tally Manufacturing for Browning Arms Co.Item: X-Bolt X Lock Style Scope MountItem Number 12502 Ring Diameter: 1"Ring Height: MediumWeight: 6.4 oz All items are facto
...Click for more info
THIS BARREL CAME OFF A WINCHESTER MODEL 70 AND IS CHAMBERED FOR 30-06 SPRINGFIELD. IT IS 21 3/4" LONG. THE FINISH IS BLUE IN GOOD CONDITION AND THE BORE IS EXCELLENT. IT HAS THE OPEN SIGHT HOLES
...Click for more info
Don't be fooled. The original sight hood on your Winchester 9422 has a bevel on both ends. Those that are sqaured on one or both ends are not the original pattern and will detract from the
...Click for more info
Without bottom metal, std bolt face, Lyman target style receiver sight w dual aperture, not tapped for scope, cock on open. Inexpensive P14 or P17 bottom metal and mag box will work depending on your
...Click for more info
Remington Early Model 8 Butt Plate
Approximately 4 3/4" X 1 1/2"
The Finest Quality Reproduction Urethane Butt Plates.
Our New Molding Technology Produces Mirror Perfect Reproductions.
...Click for more info
This is a Polish Model PM63 Submachine pistol parts kit - you will receive all that is pictured - shipping/insurance adds $25 to the cost.
...Click for more info
This an original Polish manuactured Parts Kit - you will receive all that is shown in the photo and nothing else. What you see is what you will receive. Shipping/insurance adds $25 to the
...Click for more info
Original pattern Sight Hood for the Pre or Post 64 Winchester Model 88 or Model 100. These have the bevel on both ends as they should (see photos). Any that are advertised with one
...Click for more info
These are original pattern Front Sight Hoods for your Winchester Model 94 Rifle or Carbine. They are the correct pattern, with two beveled ends and they are a bit less in height than the hood fo
...Click for more info
Original pattern Front Sight Hood for your valuable Winchester Model 64 Rifle or Carbine. Buyer Beware! Some are selling Sight Hoods that are not patterned after the original Winchester m
...Click for more info
Original pattern Front Sight Hood for your valuable Model 71 Winchester Rifle or Carbine. Buyer Beware! The original Winchester Front Sight Hood has a bevel on either end - not squared on
...Click for more info
Thompson Contender Grip Caps
With Thompson Center Arms Logo
This is the Early Model Contender Grip Cap
The Finest Quality Reproduction Urethane Grip Caps.
Our New Molding Technology Produces
...Click for more info
Used Fajen stock, tang screw hole appears a bit enlongated, may have been on something else but it fits rather well on a post 64 winchester 94. Could be used just fine as is- look at the pictures- gun
...Click for more info
Nylon - 66 - Parts Stk# Nylon 66 Parts
These are parts for the Nylon 66 Rifle. it comes with everything you see in the photo. Trigger, Guard, Striker sleeve, Firing Pin Striker Guide tube,
...Click for more info
SAKO OptiLock Scope Rings
1" low
Stainless steel
Brand new in original packaging
Designed specifically for SAKO and TIKKA rifles
...Click for more info
H. Dumoulin European Deer Scene Rifle Butt Plate
Red Stag
Approximately 5.37" X 1.64"
We Do Not Know Which Model It Is. Please Check Measurements
The Finest Quality Reproduction
...Click for more info
Win. Model 94 deluxe checkered & carved forend, fancy wood with I believe factory checkering, oak leaf & acorn carving, worn, old 2” crack that has been repaired.
...Click for more info