The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
This is a U.S. M5A1 MILPAR COL Bayonet & USM8A1 Scabbard P.W.H. The bayonet is in good to very good+ used condition. The blade shows signs of used with sharpened edges, nice tip and most of the or
...Click for more info
This is a Krag bayonet stamped US on the obverse of the Ricasso and dated 1898 on the reverse. It measures 16 1/8 inches overall with an 11 5/8 inch fullered blade which remains armory bright with som
...Click for more info
This is an original WWII poster issued in 1943 to support the War Bond drives.
Featuring a wouned soldier this poster measures 28 ½" x 40".
Created by Robert Sloan it was produced by
...Click for more info
This is a WWII German SG 84/98 3d model bayonet. This fits the Mauser Gewehr 98 & Karabiner 98k which were two of the standard German infantry rifles. The ricasso is marked 571 over b on one side
...Click for more info
This is a US M1873 Trapdoor Socket Bayonet with the original USN marked scabbard and frog. This standard Trapdoor rifle bayonet was issued for use by sailors in the US Navy housed in arms lockers on s
...Click for more info
"WWII Era Gold Sword Knot for the U.S. Navy Produced by Wolf Browne Uniforms and Equipment. Box Is Rubbed on the Edges, but Overall is in Very Good Condition. Gold Sword Knot is Excellent. Includ
...Click for more info
This is one of the rarest Confederate items to have. The tin CS canteen. Just not many have been seen. And if you do find one they sell for $25k or more. Depending on the condition. This one is in gre
...Click for more info
This bayonet was manufactured in 1943 by Oneida Limited. The 15 7/8" sharpened blade has half of the original finish, in good used condition, some small chips, nice tip. Ricasso marked "US O
...Click for more info
Synopsis: Beautiful, all correct, late war Remington Rand 1911A1. Description: Standard configuration, and all correct, Remington Rand M1911A1 with ramp front sight and drift adjustable rear sight hav
...Click for more info
The blade has been sharpened.
Overall length 15.4"
Blade 10.15.
There are some dents in the blade protector.
See photos for condition.
...Click for more info
This is a Watervliet Arsenal McKeever Cartridge Box with the NG scroll plate on the leather front.
Holds 20 rounds of .45/70 Government ammunition.
The second type had a swell in the side for the
...Click for more info
This is a Krag bayonet stamped US on the obverse of the ricasso and dated 1900 on the reverse. It measures 16 1/8 inches overall with an 11 1/2 inch fullered blade in near excellent armory bright cond
...Click for more info
This is a United States Standard, 6' X 10' Wool 45 Star Flag from the Spanish American Era. The 45-star flag became the official United States flag on July 4, 1896. A star was added for the admission
...Click for more info
Indian War cannon ball. Flattened/not round. Circa 1870. Size: 2 1/4" x 1 3/4"
Family Owned & Operated
Cisco’s Gallery deals in the rare, exceptional, and one-of-a-kind pi
...Click for more info
This bayonet was manufactured in 1910 by the Springfield Arsenal. The 15 7/8" factory edged blade is bright in very good condition, some small chips, nice tip. Ricasso marked "US over 473837
...Click for more info
This is a Model 1816 bayonet "US" marked on the face of the blade below a "U" inspector mark possibly John Unsild as referenced in Mark Rentschler's article "1816 Bayonet Manu
...Click for more info
This is a US M69 Practice Hand Grenade Inert from the Vietnam era. This example is in excellent condition and retains most of the original blue paint and bold lettering, "FSN 1330-178-8515 GRENAD
...Click for more info
This is an original WWII poster issued in 1942 by the War Production Drive Headquarters. It measures 28 1/2" x 39 1/2" and was printed by the U.S. Government Printing Office and is coded
...Click for more info
This is an inert RPG 7 Rocket Motor Section with the End Cap. The rocket motor consists of, nozzle block, nozzle, motor body, propellant motor rear, ignition primer. This example is marked "8-24-
...Click for more info
32816- SPRINGFIELD KRAG U.S. MODEL 1892 BAYONET AND SCABBARD. For all model Krag Rifles that use the bayonet. Blade dated 1900. Exceptional plus with all the scabbard blue and bright polish on blade.
...Click for more info
This is Model 1816 bayonet that is "US" marked on the face of the blade with mark of "K" near the elongated T-shaped mortise slot on the socket with no numbers present.
Build for
...Click for more info
Book is in very good condition. There are numerous black and white illustrations, plans and tactical diagrams. Table of contents are in pictures and it comes with three maps in back cover pocket which
...Click for more info
This is a Krag bayonet stamped US on the obverse of the Ricasso and dated 1898 on the reverse. It measures 16 3/16 inches overall with an 11 11/16 inch fullered blade which remains armory bright with
...Click for more info
"WWII Era Issued Leather Sheath for U.S.M.C. Bolo Knife. Sheath is Stamped on the Reverse ""USMC/BOYT/44"". Leather is supple with marks throughout and brass fittings show wea
...Click for more info
This jacket was worn by a soldier who served in both the US Third Army and US Seventh Army.
It appears the soldier was stationed in Germany or Austria following the war and acquired high quality Germ
...Click for more info
This is a very nice sword that measures 35" overall, with a 29 3/4" slightly curved, single-edged blade having single fullers and 2/3 length etched panels on both sides. The blade has an ove
...Click for more info
This is a Korean war era M1950 Parachutist's Individual Weapons Case with a very early date 9, February 1951. The M1950 case was used by parachutists as a protective container for individual weapons.
...Click for more info
This is a US Model 1904 Hospital Corps knife that measures 17 1/4" overall with an 11 7/8" curved, single-edged blade with rounded tip. The blade has an armory bright polish with scattered s
...Click for more info
"Vietnam Era Issued Canteen Cover. Color is Slightly Faded, Stitching is Frayed on Rim, and 2 Minor Tears Opposite of Each Other on the Front. Overall Condition is Good.
...Click for more info
This is a Krag bayonet stamped US on the obverse of the ricasso and dated 1897 on the reverse. It measures 16 1/4 inches overall with an 11 5/8 inch fullered blade in excellent armory bright condition
...Click for more info
"1942 Dated Leather Rifle Scabbard for M1 Garand Rifle. Stamped ""U.S./ BOYT/ 42"" on the Rim of the Scabbard. Leather is Boardy with Scratches Throughout. Missing Both Straps
...Click for more info
"1939 Dated Leather Rifle Scabbard for M1 Garand Rifle. Stamped ""JQMD/1939/JB"" on the Rim of the Scabbard and ""W.V.G."" on the Backside Along the Seam.
...Click for more info
"1942 dated Leather Rifle Scabbard for M1 Garand Rifle. Stamped ""U.S./Hess & Hopkins Leather Co./ 1942"" on the Rim of the Scabbard along with ""1""
...Click for more info
This is an excellent condition pre-WW1 37mm U.M.C. Co. 3-1898 Artillery Shell. The brass case of the round has some imperfection from time and handling with a nice patina. The head-stamp is marked U.M
...Click for more info
This is a very nice original example of WWII production Paris-Dunn Corp 1903 Mark 1 U.S. Navy Dummy Training rifle. The wood stock is in good condition, with dents and dings and shows plenty of use wi
...Click for more info
Serial #AF42-3238.
This is a bubble sextant assembly, manufactured by Fairchild Aviation Corp., which has retained 97% plus of the original black "crinkled" finish and has clouded but still
...Click for more info
U.S.M1906 fencing bayonet designed to fit 45/70 trapdoor rifle.Leather stamped rock island arsenal,1906 with inspectors marks.Small separation at seams toward socket but otherwise in very good conditi
...Click for more info
I first saw this plate on an estate sale out of Virginia Beach, Va., at a nominal starting bid. There was limited information except it came from a local estate that was being sold. I liked the range
...Click for more info
This is a US Mark I practice grenade, one-piece hollow cast iron with holes at the top and base training hand grenade. The MK1 is a nonfunctioning type developed to help safely train soldiers in the e
...Click for more info
This is a Krag bayonet stamped US on the obverse of the ricasso and dated 1897 on the reverse. It measures 16 1/4 inches overall with an 11 5/8 inch fullered blade very lightly sharpened with scattere
...Click for more info
This is very nice Korean war era US M26 Practice Grenade made by Richmond Foundry & Mgf. and labeled RFX55 R2 with a M205A1, 53 dated fuze. Overall in excellent condition and ready for display.
...Click for more info
This is a Spanish American War Era leather Sword belt with brass Eagle buckle and hangers. The buckle is in very good condition with a good deal of the original gilding with all other hardware like sn
...Click for more info
U.S. Military horse bit marked 3 on the left side and US on the right shank.
Y &T marked on the side.
Sound original condition straight shank bit complete with chain.;
...Click for more info
This is a very scarce 1900 dated U.S. Cadet Bayonet Model of 1895 built for the cadets at West Point that comes in a correct scabbard with the leather Hoffman's Belt attachment.
Production was very l
...Click for more info