to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Phenomenal Colt 1st Gen SAA in .38-40, 1905 mfg.
Phenomenal Colt 1st Gen SAA in .38-40, 1905 mfg.
Click Photo to Enlarge
Guns International #: 102254234
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: El Gallo
Member Since: 9/1/20
First Name: Chris
Last Name: Kanzler
State:
New Hampshire
Zip: 03813
Country: United States
Phone:
(603) 986-2899
Active Listings: 5
Total Listings: 44
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Flat Fee Shipping Charge: $50/Firearm
Flat Fee Shipping Charge: $50/Firearm
Payment Methods: PayPal, Certified Check, Personal Check, Money Order
Phenomenal Colt 1st Gen SAA in .38-40, 1905 mfg.
Description:
This is a superb example of the first generation Colt Single Action Army Revolver. It was manufactured one hundred and eighteen years ago, in 1905. Chambered in .38 WCF (.38-40), with a 5.5" barrel, and original GP hard rubber grips. The smokeless powder frame, hammer and loading gate are case colored, retaining beautiful definition. Barrel and backstrap/trigger guard are finished in the matte commercial blue, with over 95% original finish remaining. Frame screws and trigger are high luster niter (fire) blue finish. All screws are in excellent condition and show no signs of buggering. Frame,triggerguard and grip buttplate have matching serial numbers (267899), and the inside face of the hard rubber grips are lightly hand etched with "7899". The loading gate has a "5682" assembly number stamped on it and there is a "5" assembler's number stamped on the upper front face of the left side of the trigger guard. The inside faces of the grip panels also have a stylized "JR" and "W" (or "M"?) etched into them.... These latter markings apparently done by a previous owner as they are etched over top of the "7899" believed to have been done at Colt during manufacturing. The stylized "JR" looks like it could represent the cattle brand of a ranch. The "W" is etched along with a diamond or box shape as well, though it could be "PW" which is also etched on the exterior surface of the left grip panel. The right exterior grip panel has been etched with the likeness of a cow's head (see pictures), leading me to believe that this gun was owned by a cowboy or ranch hand (PW) working at the JR ranch (or Jones Ranch or James Ranch, etc.)...but this is just my speculation. The carved "PW" and steer head image are the only modifications noticeable on this otherwise pristine revolver. The exterior metal surfaces show minimal fine freckling, while the cylinder exhibits virtually no spin ring. The bore is bright with sharp lands and grooves and the "4 click" action functions 100%. Judging by the difference in condition of the grips and exterior metal surfaces, the gun must have been refinished at some point over it's life...though the refinishing is of superb quality and virtually undetectable. Of the five calibers that the 1st generation SAA's were produced in, the .38WCF is the third most rare, with a total of only 50,520 manufactured in this caliber. This gun is in incredible condition, both cosmetically and mechanically and would make an outstanding addition to any Colt SAA collection.
This revolver is classified as a Curio & Relic by the ATF.
SOLD
Curio/Relic: Yes
Handgun Caliber: .38-40 Winchester (.38 WCF)
Manufacturer: Colt
Model: Single Action Army Revolver
Serial Number: 267899
Barrel Length: 5.5
Condition: Excellent
Metal Condition: Excellent
Bore Condition: Excellent
Action: Single
Finish: Case Colored/Blued
Weight: 38 oz.
Sights: Fixed/Blade
Manufacture Date: 1905
Item Location: Maine
Description:
This is a superb example of the first generation Colt Single Action Army Revolver. It was manufactured one hundred and eighteen years ago, in 1905. Chambered in .38 WCF (.38-40), with a 5.5" barrel, and original GP hard rubber grips. The smokeless powder frame, hammer and loading gate are case colored, retaining beautiful definition. Barrel and backstrap/trigger guard are finished in the matte commercial blue, with over 95% original finish remaining. Frame screws and trigger are high luster niter (fire) blue finish. All screws are in excellent condition and show no signs of buggering. Frame,triggerguard and grip buttplate have matching serial numbers (267899), and the inside face of the hard rubber grips are lightly hand etched with "7899". The loading gate has a "5682" assembly number stamped on it and there is a "5" assembler's number stamped on the upper front face of the left side of the trigger guard. The inside faces of the grip panels also have a stylized "JR" and "W" (or "M"?) etched into them.... These latter markings apparently done by a previous owner as they are etched over top of the "7899" believed to have been done at Colt during manufacturing. The stylized "JR" looks like it could represent the cattle brand of a ranch. The "W" is etched along with a diamond or box shape as well, though it could be "PW" which is also etched on the exterior surface of the left grip panel. The right exterior grip panel has been etched with the likeness of a cow's head (see pictures), leading me to believe that this gun was owned by a cowboy or ranch hand (PW) working at the JR ranch (or Jones Ranch or James Ranch, etc.)...but this is just my speculation. The carved "PW" and steer head image are the only modifications noticeable on this otherwise pristine revolver. The exterior metal surfaces show minimal fine freckling, while the cylinder exhibits virtually no spin ring. The bore is bright with sharp lands and grooves and the "4 click" action functions 100%. Judging by the difference in condition of the grips and exterior metal surfaces, the gun must have been refinished at some point over it's life...though the refinishing is of superb quality and virtually undetectable. Of the five calibers that the 1st generation SAA's were produced in, the .38WCF is the third most rare, with a total of only 50,520 manufactured in this caliber. This gun is in incredible condition, both cosmetically and mechanically and would make an outstanding addition to any Colt SAA collection.
This revolver is classified as a Curio & Relic by the ATF.
SOLD
Curio/Relic: Yes
Handgun Caliber: .38-40 Winchester (.38 WCF)
Manufacturer: Colt
Model: Single Action Army Revolver
Serial Number: 267899
Barrel Length: 5.5
Condition: Excellent
Metal Condition: Excellent
Bore Condition: Excellent
Action: Single
Finish: Case Colored/Blued
Weight: 38 oz.
Sights: Fixed/Blade
Manufacture Date: 1905
Item Location: Maine
|
Click Photo to Enlarge
|
Guns International #: 102254234
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: El Gallo
Member Since: 9/1/20
First Name: Chris
Last Name: Kanzler
State:
New Hampshire
Zip: 03813
Country: United States
Phone:
(603) 986-2899
Active Listings: 5
Total Listings: 44
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Flat Fee Shipping Charge: $50/Firearm Payment Methods: PayPal, Certified Check, Personal Check, Money Order
Phenomenal Colt 1st Gen SAA in .38-40, 1905 mfg.
Description: This is a superb example of the first generation Colt Single Action Army Revolver. It was manufactured one hundred and eighteen years ago, in 1905. Chambered in .38 WCF (.38-40), with a 5.5" barrel, and original GP hard rubber grips. The smokeless powder frame, hammer and loading gate are case colored, retaining beautiful definition. Barrel and backstrap/trigger guard are finished in the matte commercial blue, with over 95% original finish remaining. Frame screws and trigger are high luster niter (fire) blue finish. All screws are in excellent condition and show no signs of buggering. Frame,triggerguard and grip buttplate have matching serial numbers (267899), and the inside face of the hard rubber grips are lightly hand etched with "7899". The loading gate has a "5682" assembly number stamped on it and there is a "5" assembler's number stamped on the upper front face of the left side of the trigger guard. The inside faces of the grip panels also have a stylized "JR" and "W" (or "M"?) etched into them.... These latter markings apparently done by a previous owner as they are etched over top of the "7899" believed to have been done at Colt during manufacturing. The stylized "JR" looks like it could represent the cattle brand of a ranch. The "W" is etched along with a diamond or box shape as well, though it could be "PW" which is also etched on the exterior surface of the left grip panel. The right exterior grip panel has been etched with the likeness of a cow's head (see pictures), leading me to believe that this gun was owned by a cowboy or ranch hand (PW) working at the JR ranch (or Jones Ranch or James Ranch, etc.)...but this is just my speculation. The carved "PW" and steer head image are the only modifications noticeable on this otherwise pristine revolver. The exterior metal surfaces show minimal fine freckling, while the cylinder exhibits virtually no spin ring. The bore is bright with sharp lands and grooves and the "4 click" action functions 100%. Judging by the difference in condition of the grips and exterior metal surfaces, the gun must have been refinished at some point over it's life...though the refinishing is of superb quality and virtually undetectable. Of the five calibers that the 1st generation SAA's were produced in, the .38WCF is the third most rare, with a total of only 50,520 manufactured in this caliber. This gun is in incredible condition, both cosmetically and mechanically and would make an outstanding addition to any Colt SAA collection. This revolver is classified as a Curio & Relic by the ATF. SOLD Curio/Relic: Yes Handgun Caliber: .38-40 Winchester (.38 WCF) Manufacturer: Colt Model: Single Action Army Revolver Serial Number: 267899 Barrel Length: 5.5 Condition: Excellent Metal Condition: Excellent Bore Condition: Excellent Action: Single Finish: Case Colored/Blued Weight: 38 oz. Sights: Fixed/Blade Manufacture Date: 1905 Item Location: Maine |
Click Photo to Enlarge
Guns International #: 102254234
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: El Gallo
Member Since: 9/1/20
First Name: Chris
Last Name: Kanzler
State:
New Hampshire
Zip: 03813
Country: United States
Phone:
(603) 986-2899
Active Listings: 5
Total Listings: 44
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Flat Fee Shipping Charge: $50/Firearm
Flat Fee Shipping Charge: $50/Firearm
Payment Methods: PayPal, Certified Check, Personal Check, Money Order
Phenomenal Colt 1st Gen SAA in .38-40, 1905 mfg.
Description:
This is a superb example of the first generation Colt Single Action Army Revolver. It was manufactured one hundred and eighteen years ago, in 1905. Chambered in .38 WCF (.38-40), with a 5.5" barrel, and original GP hard rubber grips. The smokeless powder frame, hammer and loading gate are case colored, retaining beautiful definition. Barrel and backstrap/trigger guard are finished in the matte commercial blue, with over 95% original finish remaining. Frame screws and trigger are high luster niter (fire) blue finish. All screws are in excellent condition and show no signs of buggering. Frame,triggerguard and grip buttplate have matching serial numbers (267899), and the inside face of the hard rubber grips are lightly hand etched with "7899". The loading gate has a "5682" assembly number stamped on it and there is a "5" assembler's number stamped on the upper front face of the left side of the trigger guard. The inside faces of the grip panels also have a stylized "JR" and "W" (or "M"?) etched into them.... These latter markings apparently done by a previous owner as they are etched over top of the "7899" believed to have been done at Colt during manufacturing. The stylized "JR" looks like it could represent the cattle brand of a ranch. The "W" is etched along with a diamond or box shape as well, though it could be "PW" which is also etched on the exterior surface of the left grip panel. The right exterior grip panel has been etched with the likeness of a cow's head (see pictures), leading me to believe that this gun was owned by a cowboy or ranch hand (PW) working at the JR ranch (or Jones Ranch or James Ranch, etc.)...but this is just my speculation. The carved "PW" and steer head image are the only modifications noticeable on this otherwise pristine revolver. The exterior metal surfaces show minimal fine freckling, while the cylinder exhibits virtually no spin ring. The bore is bright with sharp lands and grooves and the "4 click" action functions 100%. Judging by the difference in condition of the grips and exterior metal surfaces, the gun must have been refinished at some point over it's life...though the refinishing is of superb quality and virtually undetectable. Of the five calibers that the 1st generation SAA's were produced in, the .38WCF is the third most rare, with a total of only 50,520 manufactured in this caliber. This gun is in incredible condition, both cosmetically and mechanically and would make an outstanding addition to any Colt SAA collection.
This revolver is classified as a Curio & Relic by the ATF.
SOLD
Curio/Relic: Yes
Handgun Caliber: .38-40 Winchester (.38 WCF)
Manufacturer: Colt
Model: Single Action Army Revolver
Serial Number: 267899
Barrel Length: 5.5
Condition: Excellent
Metal Condition: Excellent
Bore Condition: Excellent
Action: Single
Finish: Case Colored/Blued
Weight: 38 oz.
Sights: Fixed/Blade
Manufacture Date: 1905
Item Location: Maine
Description:
This is a superb example of the first generation Colt Single Action Army Revolver. It was manufactured one hundred and eighteen years ago, in 1905. Chambered in .38 WCF (.38-40), with a 5.5" barrel, and original GP hard rubber grips. The smokeless powder frame, hammer and loading gate are case colored, retaining beautiful definition. Barrel and backstrap/trigger guard are finished in the matte commercial blue, with over 95% original finish remaining. Frame screws and trigger are high luster niter (fire) blue finish. All screws are in excellent condition and show no signs of buggering. Frame,triggerguard and grip buttplate have matching serial numbers (267899), and the inside face of the hard rubber grips are lightly hand etched with "7899". The loading gate has a "5682" assembly number stamped on it and there is a "5" assembler's number stamped on the upper front face of the left side of the trigger guard. The inside faces of the grip panels also have a stylized "JR" and "W" (or "M"?) etched into them.... These latter markings apparently done by a previous owner as they are etched over top of the "7899" believed to have been done at Colt during manufacturing. The stylized "JR" looks like it could represent the cattle brand of a ranch. The "W" is etched along with a diamond or box shape as well, though it could be "PW" which is also etched on the exterior surface of the left grip panel. The right exterior grip panel has been etched with the likeness of a cow's head (see pictures), leading me to believe that this gun was owned by a cowboy or ranch hand (PW) working at the JR ranch (or Jones Ranch or James Ranch, etc.)...but this is just my speculation. The carved "PW" and steer head image are the only modifications noticeable on this otherwise pristine revolver. The exterior metal surfaces show minimal fine freckling, while the cylinder exhibits virtually no spin ring. The bore is bright with sharp lands and grooves and the "4 click" action functions 100%. Judging by the difference in condition of the grips and exterior metal surfaces, the gun must have been refinished at some point over it's life...though the refinishing is of superb quality and virtually undetectable. Of the five calibers that the 1st generation SAA's were produced in, the .38WCF is the third most rare, with a total of only 50,520 manufactured in this caliber. This gun is in incredible condition, both cosmetically and mechanically and would make an outstanding addition to any Colt SAA collection.
This revolver is classified as a Curio & Relic by the ATF.
SOLD
Curio/Relic: Yes
Handgun Caliber: .38-40 Winchester (.38 WCF)
Manufacturer: Colt
Model: Single Action Army Revolver
Serial Number: 267899
Barrel Length: 5.5
Condition: Excellent
Metal Condition: Excellent
Bore Condition: Excellent
Action: Single
Finish: Case Colored/Blued
Weight: 38 oz.
Sights: Fixed/Blade
Manufacture Date: 1905
Item Location: Maine
Guns International #: 102254234
Guns International #: 102254234
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: El Gallo
Member Since: 9/1/20
First Name: Chris
Last Name: Kanzler
State:
New Hampshire
Zip: 03813
Country: United States
Phone:
(603) 986-2899
Active Listings: 5
Total Listings: 44
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories.
Flat Fee Shipping Charge: $50/Firearm
Flat Fee Shipping Charge: $50/Firearm
Payment Methods: PayPal, Certified Check, Personal Check, Money Order
Phenomenal Colt 1st Gen SAA in .38-40, 1905 mfg.
Description:
This is a superb example of the first generation Colt Single Action Army Revolver. It was manufactured one hundred and eighteen years ago, in 1905. Chambered in .38 WCF (.38-40), with a 5.5" barrel, and original GP hard rubber grips. The smokeless powder frame, hammer and loading gate are case colored, retaining beautiful definition. Barrel and backstrap/trigger guard are finished in the matte commercial blue, with over 95% original finish remaining. Frame screws and trigger are high luster niter (fire) blue finish. All screws are in excellent condition and show no signs of buggering. Frame,triggerguard and grip buttplate have matching serial numbers (267899), and the inside face of the hard rubber grips are lightly hand etched with "7899". The loading gate has a "5682" assembly number stamped on it and there is a "5" assembler's number stamped on the upper front face of the left side of the trigger guard. The inside faces of the grip panels also have a stylized "JR" and "W" (or "M"?) etched into them.... These latter markings apparently done by a previous owner as they are etched over top of the "7899" believed to have been done at Colt during manufacturing. The stylized "JR" looks like it could represent the cattle brand of a ranch. The "W" is etched along with a diamond or box shape as well, though it could be "PW" which is also etched on the exterior surface of the left grip panel. The right exterior grip panel has been etched with the likeness of a cow's head (see pictures), leading me to believe that this gun was owned by a cowboy or ranch hand (PW) working at the JR ranch (or Jones Ranch or James Ranch, etc.)...but this is just my speculation. The carved "PW" and steer head image are the only modifications noticeable on this otherwise pristine revolver. The exterior metal surfaces show minimal fine freckling, while the cylinder exhibits virtually no spin ring. The bore is bright with sharp lands and grooves and the "4 click" action functions 100%. Judging by the difference in condition of the grips and exterior metal surfaces, the gun must have been refinished at some point over it's life...though the refinishing is of superb quality and virtually undetectable. Of the five calibers that the 1st generation SAA's were produced in, the .38WCF is the third most rare, with a total of only 50,520 manufactured in this caliber. This gun is in incredible condition, both cosmetically and mechanically and would make an outstanding addition to any Colt SAA collection.
This revolver is classified as a Curio & Relic by the ATF.
SOLD
Curio/Relic: Yes
Handgun Caliber: .38-40 Winchester (.38 WCF)
Manufacturer: Colt
Model: Single Action Army Revolver
Serial Number: 267899
Barrel Length: 5.5
Condition: Excellent
Metal Condition: Excellent
Bore Condition: Excellent
Action: Single
Finish: Case Colored/Blued
Weight: 38 oz.
Sights: Fixed/Blade
Manufacture Date: 1905
Item Location: Maine
Description:
This is a superb example of the first generation Colt Single Action Army Revolver. It was manufactured one hundred and eighteen years ago, in 1905. Chambered in .38 WCF (.38-40), with a 5.5" barrel, and original GP hard rubber grips. The smokeless powder frame, hammer and loading gate are case colored, retaining beautiful definition. Barrel and backstrap/trigger guard are finished in the matte commercial blue, with over 95% original finish remaining. Frame screws and trigger are high luster niter (fire) blue finish. All screws are in excellent condition and show no signs of buggering. Frame,triggerguard and grip buttplate have matching serial numbers (267899), and the inside face of the hard rubber grips are lightly hand etched with "7899". The loading gate has a "5682" assembly number stamped on it and there is a "5" assembler's number stamped on the upper front face of the left side of the trigger guard. The inside faces of the grip panels also have a stylized "JR" and "W" (or "M"?) etched into them.... These latter markings apparently done by a previous owner as they are etched over top of the "7899" believed to have been done at Colt during manufacturing. The stylized "JR" looks like it could represent the cattle brand of a ranch. The "W" is etched along with a diamond or box shape as well, though it could be "PW" which is also etched on the exterior surface of the left grip panel. The right exterior grip panel has been etched with the likeness of a cow's head (see pictures), leading me to believe that this gun was owned by a cowboy or ranch hand (PW) working at the JR ranch (or Jones Ranch or James Ranch, etc.)...but this is just my speculation. The carved "PW" and steer head image are the only modifications noticeable on this otherwise pristine revolver. The exterior metal surfaces show minimal fine freckling, while the cylinder exhibits virtually no spin ring. The bore is bright with sharp lands and grooves and the "4 click" action functions 100%. Judging by the difference in condition of the grips and exterior metal surfaces, the gun must have been refinished at some point over it's life...though the refinishing is of superb quality and virtually undetectable. Of the five calibers that the 1st generation SAA's were produced in, the .38WCF is the third most rare, with a total of only 50,520 manufactured in this caliber. This gun is in incredible condition, both cosmetically and mechanically and would make an outstanding addition to any Colt SAA collection.
This revolver is classified as a Curio & Relic by the ATF.
SOLD
Curio/Relic: Yes
Handgun Caliber: .38-40 Winchester (.38 WCF)
Manufacturer: Colt
Model: Single Action Army Revolver
Serial Number: 267899
Barrel Length: 5.5
Condition: Excellent
Metal Condition: Excellent
Bore Condition: Excellent
Action: Single
Finish: Case Colored/Blued
Weight: 38 oz.
Sights: Fixed/Blade
Manufacture Date: 1905
Item Location: Maine
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww2
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww2
Guns International.com | V4.1 ww2