to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Excellent 95% Antique Smith & Wesson "Frontier" Double Action Model 44-40 Caliber With 5" Barrel. Tight As A New Gun. Early S/N.
Excellent 95% Antique Smith & Wesson "Frontier" Double Action Model 44-40 Caliber With 5" Barrel. Tight As A New Gun. Early S/N.
Click Photo to Enlarge
Guns International #: 102092978
Seller's Inventory #: 445
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Tom Boyer
Member Since: 1/2/10
First Name: Tom
Last Name: Boyer
State:
Indiana
Zip: 47359
Country: United States
Phone:
(765) 728-8049
Premium Seller
Active Listings: 8
Total Listings: 530
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: Cashiers check, Money orders, Personal checks.
Excellent 95% Antique Smith & Wesson "Frontier" Double Action Model 44-40 Caliber With 5" Barrel. Tight As A New Gun. Early S/N.
Description:
SOLD.... Excellent Smith & Wesson Double Action Frontier Model in 44-40 with 5“ barrel. This is a great looking Smith & Wesson Frontier model. This model is in it's own serial number range and in the sought after 44-40 caliber.. It has the bit more rare 5” barrel. S/N is 3113 and all matching on the barrel, barrel latch, cylinder and frame of course.. This Frontier model was made from 1886 to 1913 S/N range from 1 to 15,341 so this gun was made very early in 1886.. This gun retains most of it's original nickle finish.. The barrel has 95% and just a couple very small spots were the nickle has flaked off the left side as you can see.. The barrel also has some small minor dings on the left side in front of the cylinder as well.. No other dings on the gun.. The cylinder has about 95% nickle finish as well with just very small specks were it has flaked off.. The frame has 98% finish including the front and rear grip straps with no flaking. Over all nickle finish is slightly clouding but could shine right back with a little polishing but I am not touching it.. Never cleaned on or messed with.. No rust or pitting.. The trigger guard blue has worn to a medium gray with just traces of blue in the protected areas. Just traces of case colors on the hammer. The blue on the barrel latch has faded to a nice blue brown patina. The mechanics are excellent.. Crisp and tight as a new gun in DA and SA.. Locks up tight with absolutely no cylinder movement when cocked for the single action and when the double action trigger is pulled.. No front to rear cylinder movement or side to side wobble.. This gun is as tight as the day it was made. Rock solid barrel to frame fit at the latch and the hinge.. The grips are fine with no cracks or chips.. No number inside but are no doubt original with a snap on factory fit.. They show some wear to the checkering and have turned to a brown color from sun light fading. I forgot to tighten the grip screw after checking for the number and in one photo showing from the rear you can see the grip screw head sticking out.. It fits perfect when snugged up.. The markings are excellent. Untouched full front sight never filed on or messed with. The bore is very good showing very strong rifling with mild black powder roughness.. No bad spots or craters.. No rings or bulges.. Should shoot great with the proper black powder loads.. The cylinder chambers are excellent and bright.. All the screw heads are very clean and not burred up from tinkering.. This is a very early Frontier model with most all of it's original nickle finish.. Hard to find these early large frame western revolvers with this much finish at a reasonable price. The 5” barrel is not as common as the loner 6 1/2” ones you will usually find. Just a real nice Smith & Wesson for the collector that wants lots of finish.. $35 insured shipping.. Call 765-728-8049 with any questions or more photos..
SOLD
Antique: Yes
Description:
SOLD.... Excellent Smith & Wesson Double Action Frontier Model in 44-40 with 5“ barrel. This is a great looking Smith & Wesson Frontier model. This model is in it's own serial number range and in the sought after 44-40 caliber.. It has the bit more rare 5” barrel. S/N is 3113 and all matching on the barrel, barrel latch, cylinder and frame of course.. This Frontier model was made from 1886 to 1913 S/N range from 1 to 15,341 so this gun was made very early in 1886.. This gun retains most of it's original nickle finish.. The barrel has 95% and just a couple very small spots were the nickle has flaked off the left side as you can see.. The barrel also has some small minor dings on the left side in front of the cylinder as well.. No other dings on the gun.. The cylinder has about 95% nickle finish as well with just very small specks were it has flaked off.. The frame has 98% finish including the front and rear grip straps with no flaking. Over all nickle finish is slightly clouding but could shine right back with a little polishing but I am not touching it.. Never cleaned on or messed with.. No rust or pitting.. The trigger guard blue has worn to a medium gray with just traces of blue in the protected areas. Just traces of case colors on the hammer. The blue on the barrel latch has faded to a nice blue brown patina. The mechanics are excellent.. Crisp and tight as a new gun in DA and SA.. Locks up tight with absolutely no cylinder movement when cocked for the single action and when the double action trigger is pulled.. No front to rear cylinder movement or side to side wobble.. This gun is as tight as the day it was made. Rock solid barrel to frame fit at the latch and the hinge.. The grips are fine with no cracks or chips.. No number inside but are no doubt original with a snap on factory fit.. They show some wear to the checkering and have turned to a brown color from sun light fading. I forgot to tighten the grip screw after checking for the number and in one photo showing from the rear you can see the grip screw head sticking out.. It fits perfect when snugged up.. The markings are excellent. Untouched full front sight never filed on or messed with. The bore is very good showing very strong rifling with mild black powder roughness.. No bad spots or craters.. No rings or bulges.. Should shoot great with the proper black powder loads.. The cylinder chambers are excellent and bright.. All the screw heads are very clean and not burred up from tinkering.. This is a very early Frontier model with most all of it's original nickle finish.. Hard to find these early large frame western revolvers with this much finish at a reasonable price. The 5” barrel is not as common as the loner 6 1/2” ones you will usually find. Just a real nice Smith & Wesson for the collector that wants lots of finish.. $35 insured shipping.. Call 765-728-8049 with any questions or more photos..
SOLD
Antique: Yes
|
Click Photo to Enlarge
|
Guns International #: 102092978
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Tom Boyer
Member Since: 1/2/10
First Name: Tom
Last Name: Boyer
State:
Indiana
Zip: 47359
Country: United States
Phone:
(765) 728-8049
Premium Seller
Active Listings: 8
Total Listings: 530
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days Payment Methods: Cashiers check, Money orders, Personal checks.
Excellent 95% Antique Smith & Wesson "Frontier" Double Action Model 44-40 Caliber With 5" Barrel. Tight As A New Gun. Early S/N.
Description: SOLD.... Excellent Smith & Wesson Double Action Frontier Model in 44-40 with 5“ barrel. This is a great looking Smith & Wesson Frontier model. This model is in it's own serial number range and in the sought after 44-40 caliber.. It has the bit more rare 5” barrel. S/N is 3113 and all matching on the barrel, barrel latch, cylinder and frame of course.. This Frontier model was made from 1886 to 1913 S/N range from 1 to 15,341 so this gun was made very early in 1886.. This gun retains most of it's original nickle finish.. The barrel has 95% and just a couple very small spots were the nickle has flaked off the left side as you can see.. The barrel also has some small minor dings on the left side in front of the cylinder as well.. No other dings on the gun.. The cylinder has about 95% nickle finish as well with just very small specks were it has flaked off.. The frame has 98% finish including the front and rear grip straps with no flaking. Over all nickle finish is slightly clouding but could shine right back with a little polishing but I am not touching it.. Never cleaned on or messed with.. No rust or pitting.. The trigger guard blue has worn to a medium gray with just traces of blue in the protected areas. Just traces of case colors on the hammer. The blue on the barrel latch has faded to a nice blue brown patina. The mechanics are excellent.. Crisp and tight as a new gun in DA and SA.. Locks up tight with absolutely no cylinder movement when cocked for the single action and when the double action trigger is pulled.. No front to rear cylinder movement or side to side wobble.. This gun is as tight as the day it was made. Rock solid barrel to frame fit at the latch and the hinge.. The grips are fine with no cracks or chips.. No number inside but are no doubt original with a snap on factory fit.. They show some wear to the checkering and have turned to a brown color from sun light fading. I forgot to tighten the grip screw after checking for the number and in one photo showing from the rear you can see the grip screw head sticking out.. It fits perfect when snugged up.. The markings are excellent. Untouched full front sight never filed on or messed with. The bore is very good showing very strong rifling with mild black powder roughness.. No bad spots or craters.. No rings or bulges.. Should shoot great with the proper black powder loads.. The cylinder chambers are excellent and bright.. All the screw heads are very clean and not burred up from tinkering.. This is a very early Frontier model with most all of it's original nickle finish.. Hard to find these early large frame western revolvers with this much finish at a reasonable price. The 5” barrel is not as common as the loner 6 1/2” ones you will usually find. Just a real nice Smith & Wesson for the collector that wants lots of finish.. $35 insured shipping.. Call 765-728-8049 with any questions or more photos.. SOLD Antique: Yes |
Click Photo to Enlarge
Guns International #: 102092978
Seller's Inventory #: 445
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Tom Boyer
Member Since: 1/2/10
First Name: Tom
Last Name: Boyer
State:
Indiana
Zip: 47359
Country: United States
Phone:
(765) 728-8049
Premium Seller
Active Listings: 8
Total Listings: 530
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: Cashiers check, Money orders, Personal checks.
Excellent 95% Antique Smith & Wesson "Frontier" Double Action Model 44-40 Caliber With 5" Barrel. Tight As A New Gun. Early S/N.
Description:
SOLD.... Excellent Smith & Wesson Double Action Frontier Model in 44-40 with 5“ barrel. This is a great looking Smith & Wesson Frontier model. This model is in it's own serial number range and in the sought after 44-40 caliber.. It has the bit more rare 5” barrel. S/N is 3113 and all matching on the barrel, barrel latch, cylinder and frame of course.. This Frontier model was made from 1886 to 1913 S/N range from 1 to 15,341 so this gun was made very early in 1886.. This gun retains most of it's original nickle finish.. The barrel has 95% and just a couple very small spots were the nickle has flaked off the left side as you can see.. The barrel also has some small minor dings on the left side in front of the cylinder as well.. No other dings on the gun.. The cylinder has about 95% nickle finish as well with just very small specks were it has flaked off.. The frame has 98% finish including the front and rear grip straps with no flaking. Over all nickle finish is slightly clouding but could shine right back with a little polishing but I am not touching it.. Never cleaned on or messed with.. No rust or pitting.. The trigger guard blue has worn to a medium gray with just traces of blue in the protected areas. Just traces of case colors on the hammer. The blue on the barrel latch has faded to a nice blue brown patina. The mechanics are excellent.. Crisp and tight as a new gun in DA and SA.. Locks up tight with absolutely no cylinder movement when cocked for the single action and when the double action trigger is pulled.. No front to rear cylinder movement or side to side wobble.. This gun is as tight as the day it was made. Rock solid barrel to frame fit at the latch and the hinge.. The grips are fine with no cracks or chips.. No number inside but are no doubt original with a snap on factory fit.. They show some wear to the checkering and have turned to a brown color from sun light fading. I forgot to tighten the grip screw after checking for the number and in one photo showing from the rear you can see the grip screw head sticking out.. It fits perfect when snugged up.. The markings are excellent. Untouched full front sight never filed on or messed with. The bore is very good showing very strong rifling with mild black powder roughness.. No bad spots or craters.. No rings or bulges.. Should shoot great with the proper black powder loads.. The cylinder chambers are excellent and bright.. All the screw heads are very clean and not burred up from tinkering.. This is a very early Frontier model with most all of it's original nickle finish.. Hard to find these early large frame western revolvers with this much finish at a reasonable price. The 5” barrel is not as common as the loner 6 1/2” ones you will usually find. Just a real nice Smith & Wesson for the collector that wants lots of finish.. $35 insured shipping.. Call 765-728-8049 with any questions or more photos..
SOLD
Antique: Yes
Description:
SOLD.... Excellent Smith & Wesson Double Action Frontier Model in 44-40 with 5“ barrel. This is a great looking Smith & Wesson Frontier model. This model is in it's own serial number range and in the sought after 44-40 caliber.. It has the bit more rare 5” barrel. S/N is 3113 and all matching on the barrel, barrel latch, cylinder and frame of course.. This Frontier model was made from 1886 to 1913 S/N range from 1 to 15,341 so this gun was made very early in 1886.. This gun retains most of it's original nickle finish.. The barrel has 95% and just a couple very small spots were the nickle has flaked off the left side as you can see.. The barrel also has some small minor dings on the left side in front of the cylinder as well.. No other dings on the gun.. The cylinder has about 95% nickle finish as well with just very small specks were it has flaked off.. The frame has 98% finish including the front and rear grip straps with no flaking. Over all nickle finish is slightly clouding but could shine right back with a little polishing but I am not touching it.. Never cleaned on or messed with.. No rust or pitting.. The trigger guard blue has worn to a medium gray with just traces of blue in the protected areas. Just traces of case colors on the hammer. The blue on the barrel latch has faded to a nice blue brown patina. The mechanics are excellent.. Crisp and tight as a new gun in DA and SA.. Locks up tight with absolutely no cylinder movement when cocked for the single action and when the double action trigger is pulled.. No front to rear cylinder movement or side to side wobble.. This gun is as tight as the day it was made. Rock solid barrel to frame fit at the latch and the hinge.. The grips are fine with no cracks or chips.. No number inside but are no doubt original with a snap on factory fit.. They show some wear to the checkering and have turned to a brown color from sun light fading. I forgot to tighten the grip screw after checking for the number and in one photo showing from the rear you can see the grip screw head sticking out.. It fits perfect when snugged up.. The markings are excellent. Untouched full front sight never filed on or messed with. The bore is very good showing very strong rifling with mild black powder roughness.. No bad spots or craters.. No rings or bulges.. Should shoot great with the proper black powder loads.. The cylinder chambers are excellent and bright.. All the screw heads are very clean and not burred up from tinkering.. This is a very early Frontier model with most all of it's original nickle finish.. Hard to find these early large frame western revolvers with this much finish at a reasonable price. The 5” barrel is not as common as the loner 6 1/2” ones you will usually find. Just a real nice Smith & Wesson for the collector that wants lots of finish.. $35 insured shipping.. Call 765-728-8049 with any questions or more photos..
SOLD
Antique: Yes
Guns International #: 102092978
Seller's Inventory #: 445
Guns International #: 102092978
Seller's Inventory #: 445
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Tom Boyer
Member Since: 1/2/10
First Name: Tom
Last Name: Boyer
State:
Indiana
Zip: 47359
Country: United States
Phone:
(765) 728-8049
Premium Seller
Active Listings: 8
Total Listings: 530
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: Cashiers check, Money orders, Personal checks.
Excellent 95% Antique Smith & Wesson "Frontier" Double Action Model 44-40 Caliber With 5" Barrel. Tight As A New Gun. Early S/N.
Description:
SOLD.... Excellent Smith & Wesson Double Action Frontier Model in 44-40 with 5“ barrel. This is a great looking Smith & Wesson Frontier model. This model is in it's own serial number range and in the sought after 44-40 caliber.. It has the bit more rare 5” barrel. S/N is 3113 and all matching on the barrel, barrel latch, cylinder and frame of course.. This Frontier model was made from 1886 to 1913 S/N range from 1 to 15,341 so this gun was made very early in 1886.. This gun retains most of it's original nickle finish.. The barrel has 95% and just a couple very small spots were the nickle has flaked off the left side as you can see.. The barrel also has some small minor dings on the left side in front of the cylinder as well.. No other dings on the gun.. The cylinder has about 95% nickle finish as well with just very small specks were it has flaked off.. The frame has 98% finish including the front and rear grip straps with no flaking. Over all nickle finish is slightly clouding but could shine right back with a little polishing but I am not touching it.. Never cleaned on or messed with.. No rust or pitting.. The trigger guard blue has worn to a medium gray with just traces of blue in the protected areas. Just traces of case colors on the hammer. The blue on the barrel latch has faded to a nice blue brown patina. The mechanics are excellent.. Crisp and tight as a new gun in DA and SA.. Locks up tight with absolutely no cylinder movement when cocked for the single action and when the double action trigger is pulled.. No front to rear cylinder movement or side to side wobble.. This gun is as tight as the day it was made. Rock solid barrel to frame fit at the latch and the hinge.. The grips are fine with no cracks or chips.. No number inside but are no doubt original with a snap on factory fit.. They show some wear to the checkering and have turned to a brown color from sun light fading. I forgot to tighten the grip screw after checking for the number and in one photo showing from the rear you can see the grip screw head sticking out.. It fits perfect when snugged up.. The markings are excellent. Untouched full front sight never filed on or messed with. The bore is very good showing very strong rifling with mild black powder roughness.. No bad spots or craters.. No rings or bulges.. Should shoot great with the proper black powder loads.. The cylinder chambers are excellent and bright.. All the screw heads are very clean and not burred up from tinkering.. This is a very early Frontier model with most all of it's original nickle finish.. Hard to find these early large frame western revolvers with this much finish at a reasonable price. The 5” barrel is not as common as the loner 6 1/2” ones you will usually find. Just a real nice Smith & Wesson for the collector that wants lots of finish.. $35 insured shipping.. Call 765-728-8049 with any questions or more photos..
SOLD
Antique: Yes
Description:
SOLD.... Excellent Smith & Wesson Double Action Frontier Model in 44-40 with 5“ barrel. This is a great looking Smith & Wesson Frontier model. This model is in it's own serial number range and in the sought after 44-40 caliber.. It has the bit more rare 5” barrel. S/N is 3113 and all matching on the barrel, barrel latch, cylinder and frame of course.. This Frontier model was made from 1886 to 1913 S/N range from 1 to 15,341 so this gun was made very early in 1886.. This gun retains most of it's original nickle finish.. The barrel has 95% and just a couple very small spots were the nickle has flaked off the left side as you can see.. The barrel also has some small minor dings on the left side in front of the cylinder as well.. No other dings on the gun.. The cylinder has about 95% nickle finish as well with just very small specks were it has flaked off.. The frame has 98% finish including the front and rear grip straps with no flaking. Over all nickle finish is slightly clouding but could shine right back with a little polishing but I am not touching it.. Never cleaned on or messed with.. No rust or pitting.. The trigger guard blue has worn to a medium gray with just traces of blue in the protected areas. Just traces of case colors on the hammer. The blue on the barrel latch has faded to a nice blue brown patina. The mechanics are excellent.. Crisp and tight as a new gun in DA and SA.. Locks up tight with absolutely no cylinder movement when cocked for the single action and when the double action trigger is pulled.. No front to rear cylinder movement or side to side wobble.. This gun is as tight as the day it was made. Rock solid barrel to frame fit at the latch and the hinge.. The grips are fine with no cracks or chips.. No number inside but are no doubt original with a snap on factory fit.. They show some wear to the checkering and have turned to a brown color from sun light fading. I forgot to tighten the grip screw after checking for the number and in one photo showing from the rear you can see the grip screw head sticking out.. It fits perfect when snugged up.. The markings are excellent. Untouched full front sight never filed on or messed with. The bore is very good showing very strong rifling with mild black powder roughness.. No bad spots or craters.. No rings or bulges.. Should shoot great with the proper black powder loads.. The cylinder chambers are excellent and bright.. All the screw heads are very clean and not burred up from tinkering.. This is a very early Frontier model with most all of it's original nickle finish.. Hard to find these early large frame western revolvers with this much finish at a reasonable price. The 5” barrel is not as common as the loner 6 1/2” ones you will usually find. Just a real nice Smith & Wesson for the collector that wants lots of finish.. $35 insured shipping.. Call 765-728-8049 with any questions or more photos..
SOLD
Antique: Yes
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3