to Favorites
1 of 13
2 of 13
3 of 13
4 of 13
5 of 13
6 of 13
7 of 13
8 of 13
9 of 13
10 of 13
11 of 13
12 of 13
13 of 13
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
.416 Taylor, on a Safari M98 from Global Trading by Bisio, Tapp, (ACGG-makers), and Morgan
.416 Taylor, on a Safari M98 from Global Trading by Bisio, Tapp, (ACGG-makers), and Morgan
Click Photo to Enlarge
Guns International #: 101320257
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: ddmflyfish
Member Since: 10/28/19
First Name: DAVID
Last Name: MOORE
State:
Colorado
Zip: 81201
Country: United States
Phone:
(719) 239-0085
Active Listings: 0
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods:
.416 Taylor, on a Safari M98 from Global Trading by Bisio, Tapp, (ACGG-makers), and Morgan
Description:
Custom 416 Taylor
The 416 Taylor is a wildcat, a 338 Win. Mag. opened up to .416
Or a .458 Win. necked down to .416. Nearly identical to the ballistics
of the 416 Rigby or 416 Remington, but in a standard (30-06) length action.
2,350 feet per second with 400 gr. Bullet, 4858 ft lb energy
This rifle was built to order in 2005 by members of the American Custom Gun-makers Guild. (AGCC ).
The wood is beautiful Russian Circassian Walnut, cut in Russia in the 1940’s
Purchased from a New York wood with original Russian markings in 1992
The wood was laid out and panagraphed by Jim Bisio, , Heritage-Walnut
in Colorado Springs. This work was done on a Dakota panagraph.
Jim is an inducted member of the American Custom Gunmakers Guild.
The wood was fit , and finished with a hand rubbed oil finish, and point pattern
checkered by Jeff Tapp, (Tapp Guns) of Austin Texas,
Jeff is also an inducted member of the American Custom Gun-makers Guild, and a Board Member of thatanization.
The metal work , barrel and action and blue, was done by the late Dr. Dennis Morgan, Denver, CO. Dennis was a dentist and well-known gunsmith in Denver
A second recoil lug was welded to the bottom of the barrel, forward of
the recoil lug on the action. The action and both lugs were glassed into
the stock to strengthen overall stability and to in improve accuracy. The action fits very
tightly into the stock. The action is a Safari M98 from Global Trading, purchased new in 2004, a Mauser design,
S/N GLO-0146. The gun weighes 9 pounds without scope, barrel is 23 inches in length and has a single flip up leaf with hooded front sight, and installed rings and base.
Accuracy is near 1 minute with 300 gr. Barnes triple shock.
The rifle was made for an African Safari, but did not make that trip, and was eventually used on two Colorado Elk hunts. Some light field scratches exist on the stock from those two trips. Blue is 99%, stock is 95%. The rifle has remained in our family since it was made and has been stored in a safe and not been fired for 10-11 years.
SOLD
Manufacturer: Custom on Global Trading action
Serial Number: GLO-0146
Caliber Info: .416 Taylor
Condition: very very good
Metal Condition: 98%
Wood Condition: 98%
Barrel Type: Heavy
Action: Bolt
Stock: Circassian Walnut
Butt Pad: rubber
Finish: Oil
Weight: 9 Pounds
Sights: Open, with scope rings
Manufacture Date: 2005
Item Location: Salida, Colorado
Description:
Custom 416 Taylor
The 416 Taylor is a wildcat, a 338 Win. Mag. opened up to .416
Or a .458 Win. necked down to .416. Nearly identical to the ballistics
of the 416 Rigby or 416 Remington, but in a standard (30-06) length action.
2,350 feet per second with 400 gr. Bullet, 4858 ft lb energy
This rifle was built to order in 2005 by members of the American Custom Gun-makers Guild. (AGCC ).
The wood is beautiful Russian Circassian Walnut, cut in Russia in the 1940’s
Purchased from a New York wood with original Russian markings in 1992
The wood was laid out and panagraphed by Jim Bisio, , Heritage-Walnut
in Colorado Springs. This work was done on a Dakota panagraph.
Jim is an inducted member of the American Custom Gunmakers Guild.
The wood was fit , and finished with a hand rubbed oil finish, and point pattern
checkered by Jeff Tapp, (Tapp Guns) of Austin Texas,
Jeff is also an inducted member of the American Custom Gun-makers Guild, and a Board Member of thatanization.
The metal work , barrel and action and blue, was done by the late Dr. Dennis Morgan, Denver, CO. Dennis was a dentist and well-known gunsmith in Denver
A second recoil lug was welded to the bottom of the barrel, forward of
the recoil lug on the action. The action and both lugs were glassed into
the stock to strengthen overall stability and to in improve accuracy. The action fits very
tightly into the stock. The action is a Safari M98 from Global Trading, purchased new in 2004, a Mauser design,
S/N GLO-0146. The gun weighes 9 pounds without scope, barrel is 23 inches in length and has a single flip up leaf with hooded front sight, and installed rings and base.
Accuracy is near 1 minute with 300 gr. Barnes triple shock.
The rifle was made for an African Safari, but did not make that trip, and was eventually used on two Colorado Elk hunts. Some light field scratches exist on the stock from those two trips. Blue is 99%, stock is 95%. The rifle has remained in our family since it was made and has been stored in a safe and not been fired for 10-11 years.
SOLD
Manufacturer: Custom on Global Trading action
Serial Number: GLO-0146
Caliber Info: .416 Taylor
Condition: very very good
Metal Condition: 98%
Wood Condition: 98%
Barrel Type: Heavy
Action: Bolt
Stock: Circassian Walnut
Butt Pad: rubber
Finish: Oil
Weight: 9 Pounds
Sights: Open, with scope rings
Manufacture Date: 2005
Item Location: Salida, Colorado
|
Click Photo to Enlarge
|
Guns International #: 101320257
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: ddmflyfish
Member Since: 10/28/19
First Name: DAVID
Last Name: MOORE
State:
Colorado
Zip: 81201
Country: United States
Phone:
(719) 239-0085
Active Listings: 0
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods:
.416 Taylor, on a Safari M98 from Global Trading by Bisio, Tapp, (ACGG-makers), and Morgan
Description: Custom 416 Taylor The 416 Taylor is a wildcat, a 338 Win. Mag. opened up to .416 Or a .458 Win. necked down to .416. Nearly identical to the ballistics of the 416 Rigby or 416 Remington, but in a standard (30-06) length action. 2,350 feet per second with 400 gr. Bullet, 4858 ft lb energy This rifle was built to order in 2005 by members of the American Custom Gun-makers Guild. (AGCC ). The wood is beautiful Russian Circassian Walnut, cut in Russia in the 1940’s Purchased from a New York wood with original Russian markings in 1992 The wood was laid out and panagraphed by Jim Bisio, , Heritage-Walnut in Colorado Springs. This work was done on a Dakota panagraph. Jim is an inducted member of the American Custom Gunmakers Guild. The wood was fit , and finished with a hand rubbed oil finish, and point pattern checkered by Jeff Tapp, (Tapp Guns) of Austin Texas, Jeff is also an inducted member of the American Custom Gun-makers Guild, and a Board Member of thatanization. The metal work , barrel and action and blue, was done by the late Dr. Dennis Morgan, Denver, CO. Dennis was a dentist and well-known gunsmith in Denver A second recoil lug was welded to the bottom of the barrel, forward of the recoil lug on the action. The action and both lugs were glassed into the stock to strengthen overall stability and to in improve accuracy. The action fits very tightly into the stock. The action is a Safari M98 from Global Trading, purchased new in 2004, a Mauser design, S/N GLO-0146. The gun weighes 9 pounds without scope, barrel is 23 inches in length and has a single flip up leaf with hooded front sight, and installed rings and base. Accuracy is near 1 minute with 300 gr. Barnes triple shock. The rifle was made for an African Safari, but did not make that trip, and was eventually used on two Colorado Elk hunts. Some light field scratches exist on the stock from those two trips. Blue is 99%, stock is 95%. The rifle has remained in our family since it was made and has been stored in a safe and not been fired for 10-11 years. SOLD Manufacturer: Custom on Global Trading action Serial Number: GLO-0146 Caliber Info: .416 Taylor Condition: very very good Metal Condition: 98% Wood Condition: 98% Barrel Type: Heavy Action: Bolt Stock: Circassian Walnut Butt Pad: rubber Finish: Oil Weight: 9 Pounds Sights: Open, with scope rings Manufacture Date: 2005 Item Location: Salida, Colorado |
Click Photo to Enlarge
Guns International #: 101320257
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: ddmflyfish
Member Since: 10/28/19
First Name: DAVID
Last Name: MOORE
State:
Colorado
Zip: 81201
Country: United States
Phone:
(719) 239-0085
Active Listings: 0
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods:
.416 Taylor, on a Safari M98 from Global Trading by Bisio, Tapp, (ACGG-makers), and Morgan
Description:
Custom 416 Taylor
The 416 Taylor is a wildcat, a 338 Win. Mag. opened up to .416
Or a .458 Win. necked down to .416. Nearly identical to the ballistics
of the 416 Rigby or 416 Remington, but in a standard (30-06) length action.
2,350 feet per second with 400 gr. Bullet, 4858 ft lb energy
This rifle was built to order in 2005 by members of the American Custom Gun-makers Guild. (AGCC ).
The wood is beautiful Russian Circassian Walnut, cut in Russia in the 1940’s
Purchased from a New York wood with original Russian markings in 1992
The wood was laid out and panagraphed by Jim Bisio, , Heritage-Walnut
in Colorado Springs. This work was done on a Dakota panagraph.
Jim is an inducted member of the American Custom Gunmakers Guild.
The wood was fit , and finished with a hand rubbed oil finish, and point pattern
checkered by Jeff Tapp, (Tapp Guns) of Austin Texas,
Jeff is also an inducted member of the American Custom Gun-makers Guild, and a Board Member of thatanization.
The metal work , barrel and action and blue, was done by the late Dr. Dennis Morgan, Denver, CO. Dennis was a dentist and well-known gunsmith in Denver
A second recoil lug was welded to the bottom of the barrel, forward of
the recoil lug on the action. The action and both lugs were glassed into
the stock to strengthen overall stability and to in improve accuracy. The action fits very
tightly into the stock. The action is a Safari M98 from Global Trading, purchased new in 2004, a Mauser design,
S/N GLO-0146. The gun weighes 9 pounds without scope, barrel is 23 inches in length and has a single flip up leaf with hooded front sight, and installed rings and base.
Accuracy is near 1 minute with 300 gr. Barnes triple shock.
The rifle was made for an African Safari, but did not make that trip, and was eventually used on two Colorado Elk hunts. Some light field scratches exist on the stock from those two trips. Blue is 99%, stock is 95%. The rifle has remained in our family since it was made and has been stored in a safe and not been fired for 10-11 years.
SOLD
Manufacturer: Custom on Global Trading action
Serial Number: GLO-0146
Caliber Info: .416 Taylor
Condition: very very good
Metal Condition: 98%
Wood Condition: 98%
Barrel Type: Heavy
Action: Bolt
Stock: Circassian Walnut
Butt Pad: rubber
Finish: Oil
Weight: 9 Pounds
Sights: Open, with scope rings
Manufacture Date: 2005
Item Location: Salida, Colorado
Description:
Custom 416 Taylor
The 416 Taylor is a wildcat, a 338 Win. Mag. opened up to .416
Or a .458 Win. necked down to .416. Nearly identical to the ballistics
of the 416 Rigby or 416 Remington, but in a standard (30-06) length action.
2,350 feet per second with 400 gr. Bullet, 4858 ft lb energy
This rifle was built to order in 2005 by members of the American Custom Gun-makers Guild. (AGCC ).
The wood is beautiful Russian Circassian Walnut, cut in Russia in the 1940’s
Purchased from a New York wood with original Russian markings in 1992
The wood was laid out and panagraphed by Jim Bisio, , Heritage-Walnut
in Colorado Springs. This work was done on a Dakota panagraph.
Jim is an inducted member of the American Custom Gunmakers Guild.
The wood was fit , and finished with a hand rubbed oil finish, and point pattern
checkered by Jeff Tapp, (Tapp Guns) of Austin Texas,
Jeff is also an inducted member of the American Custom Gun-makers Guild, and a Board Member of thatanization.
The metal work , barrel and action and blue, was done by the late Dr. Dennis Morgan, Denver, CO. Dennis was a dentist and well-known gunsmith in Denver
A second recoil lug was welded to the bottom of the barrel, forward of
the recoil lug on the action. The action and both lugs were glassed into
the stock to strengthen overall stability and to in improve accuracy. The action fits very
tightly into the stock. The action is a Safari M98 from Global Trading, purchased new in 2004, a Mauser design,
S/N GLO-0146. The gun weighes 9 pounds without scope, barrel is 23 inches in length and has a single flip up leaf with hooded front sight, and installed rings and base.
Accuracy is near 1 minute with 300 gr. Barnes triple shock.
The rifle was made for an African Safari, but did not make that trip, and was eventually used on two Colorado Elk hunts. Some light field scratches exist on the stock from those two trips. Blue is 99%, stock is 95%. The rifle has remained in our family since it was made and has been stored in a safe and not been fired for 10-11 years.
SOLD
Manufacturer: Custom on Global Trading action
Serial Number: GLO-0146
Caliber Info: .416 Taylor
Condition: very very good
Metal Condition: 98%
Wood Condition: 98%
Barrel Type: Heavy
Action: Bolt
Stock: Circassian Walnut
Butt Pad: rubber
Finish: Oil
Weight: 9 Pounds
Sights: Open, with scope rings
Manufacture Date: 2005
Item Location: Salida, Colorado
Guns International #: 101320257
Guns International #: 101320257
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: ddmflyfish
Member Since: 10/28/19
First Name: DAVID
Last Name: MOORE
State:
Colorado
Zip: 81201
Country: United States
Phone:
(719) 239-0085
Active Listings: 0
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods:
.416 Taylor, on a Safari M98 from Global Trading by Bisio, Tapp, (ACGG-makers), and Morgan
Description:
Custom 416 Taylor
The 416 Taylor is a wildcat, a 338 Win. Mag. opened up to .416
Or a .458 Win. necked down to .416. Nearly identical to the ballistics
of the 416 Rigby or 416 Remington, but in a standard (30-06) length action.
2,350 feet per second with 400 gr. Bullet, 4858 ft lb energy
This rifle was built to order in 2005 by members of the American Custom Gun-makers Guild. (AGCC ).
The wood is beautiful Russian Circassian Walnut, cut in Russia in the 1940’s
Purchased from a New York wood with original Russian markings in 1992
The wood was laid out and panagraphed by Jim Bisio, , Heritage-Walnut
in Colorado Springs. This work was done on a Dakota panagraph.
Jim is an inducted member of the American Custom Gunmakers Guild.
The wood was fit , and finished with a hand rubbed oil finish, and point pattern
checkered by Jeff Tapp, (Tapp Guns) of Austin Texas,
Jeff is also an inducted member of the American Custom Gun-makers Guild, and a Board Member of thatanization.
The metal work , barrel and action and blue, was done by the late Dr. Dennis Morgan, Denver, CO. Dennis was a dentist and well-known gunsmith in Denver
A second recoil lug was welded to the bottom of the barrel, forward of
the recoil lug on the action. The action and both lugs were glassed into
the stock to strengthen overall stability and to in improve accuracy. The action fits very
tightly into the stock. The action is a Safari M98 from Global Trading, purchased new in 2004, a Mauser design,
S/N GLO-0146. The gun weighes 9 pounds without scope, barrel is 23 inches in length and has a single flip up leaf with hooded front sight, and installed rings and base.
Accuracy is near 1 minute with 300 gr. Barnes triple shock.
The rifle was made for an African Safari, but did not make that trip, and was eventually used on two Colorado Elk hunts. Some light field scratches exist on the stock from those two trips. Blue is 99%, stock is 95%. The rifle has remained in our family since it was made and has been stored in a safe and not been fired for 10-11 years.
SOLD
Manufacturer: Custom on Global Trading action
Serial Number: GLO-0146
Caliber Info: .416 Taylor
Condition: very very good
Metal Condition: 98%
Wood Condition: 98%
Barrel Type: Heavy
Action: Bolt
Stock: Circassian Walnut
Butt Pad: rubber
Finish: Oil
Weight: 9 Pounds
Sights: Open, with scope rings
Manufacture Date: 2005
Item Location: Salida, Colorado
Description:
Custom 416 Taylor
The 416 Taylor is a wildcat, a 338 Win. Mag. opened up to .416
Or a .458 Win. necked down to .416. Nearly identical to the ballistics
of the 416 Rigby or 416 Remington, but in a standard (30-06) length action.
2,350 feet per second with 400 gr. Bullet, 4858 ft lb energy
This rifle was built to order in 2005 by members of the American Custom Gun-makers Guild. (AGCC ).
The wood is beautiful Russian Circassian Walnut, cut in Russia in the 1940’s
Purchased from a New York wood with original Russian markings in 1992
The wood was laid out and panagraphed by Jim Bisio, , Heritage-Walnut
in Colorado Springs. This work was done on a Dakota panagraph.
Jim is an inducted member of the American Custom Gunmakers Guild.
The wood was fit , and finished with a hand rubbed oil finish, and point pattern
checkered by Jeff Tapp, (Tapp Guns) of Austin Texas,
Jeff is also an inducted member of the American Custom Gun-makers Guild, and a Board Member of thatanization.
The metal work , barrel and action and blue, was done by the late Dr. Dennis Morgan, Denver, CO. Dennis was a dentist and well-known gunsmith in Denver
A second recoil lug was welded to the bottom of the barrel, forward of
the recoil lug on the action. The action and both lugs were glassed into
the stock to strengthen overall stability and to in improve accuracy. The action fits very
tightly into the stock. The action is a Safari M98 from Global Trading, purchased new in 2004, a Mauser design,
S/N GLO-0146. The gun weighes 9 pounds without scope, barrel is 23 inches in length and has a single flip up leaf with hooded front sight, and installed rings and base.
Accuracy is near 1 minute with 300 gr. Barnes triple shock.
The rifle was made for an African Safari, but did not make that trip, and was eventually used on two Colorado Elk hunts. Some light field scratches exist on the stock from those two trips. Blue is 99%, stock is 95%. The rifle has remained in our family since it was made and has been stored in a safe and not been fired for 10-11 years.
SOLD
Manufacturer: Custom on Global Trading action
Serial Number: GLO-0146
Caliber Info: .416 Taylor
Condition: very very good
Metal Condition: 98%
Wood Condition: 98%
Barrel Type: Heavy
Action: Bolt
Stock: Circassian Walnut
Butt Pad: rubber
Finish: Oil
Weight: 9 Pounds
Sights: Open, with scope rings
Manufacture Date: 2005
Item Location: Salida, Colorado
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww2
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww2
Guns International.com | V4.1 ww2