to Favorites
1 of 5
2 of 5
3 of 5
4 of 5
5 of 5
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Perazzi MX8 12 gauge. 28 3/8" Long. Barrels only. sixteen choke tubes. Full set of skeet sub gauge .410, 28 and 20ga.
Perazzi MX8 12 gauge. 28 3/8" Long. Barrels only. sixteen choke tubes. Full set of skeet sub gauge .410, 28 and 20ga.
Click Photo to Enlarge
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Jim Veta
Company:
Company:
Member Since: 12/6/10
State:
Nevada
Country: United States
Phone:
(310) 291-1784
Active Listings: 0
Total Listings: 222
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: money order, cashiers check
Perazzi MX8 12 gauge. 28 3/8" Long. Barrels only. sixteen choke tubes. Full set of skeet sub gauge .410, 28 and 20ga.
Description:
The Kolar tubes have sold!!! Barrel only. 12ga. MX8 square mono block, type four, 28 3/8" length, serial number is shown in Pictures 82xxx range. This is not a carrier barrel! 16 choke tubes. 11 Generation 2, original, Perazzi chokes. 2-0's(cylinder),
1-#1 .004 (skeet). 2-#2's .008(I.C.), 2-#4's .016(lt. Mod.) 2-#6"s .024(I.M.) 1-#8 .032(full) 1-#10 .040(x-full). Also: 5 Wright choke tubes in the following: 2-#1's(.004) skeet, 1-#3 .012(I.C.), 2-#4's .016(lt.mod.)
This is a flat, 11x11mm paralell rib. It had a Hi-viz system that was removed and a typical bead was installed. It is an easy fix to re-install the hi-Viz and get rid of the gap you see. The bore is 18.4(.725). The forcing cones have been lengthened. Both barrels are ported. There is a white front bead and a smaller metal mid-bead. No galling. these barrels will fit any Perazzi MX8 style square mono-block accepting receiver. It will not fit on any MX3, MX5, MX6 or MX7. It will fit on MX3 special, MX8, MX8 special, MX2000, MX11 and a few more. Split barrels with no side ribs. The barrel weight is stamped 1.5kg, however it really weighs a bit less at 1.47Kg(3lb's 3.8OZ's). I would rate the bluing at 98%. Perfect for Skeet, Sporting clays and live box birds. They will snap on the receiver but may require some final fitting by a competent gunsmith. My return policy is three day non-shooting inspection. I will not accept a return unless I have mis-represented or not disclosed info. on the the barrels either through print or Picture. Returning the barrels because they may require fitting is not an acceptable reason.
SOLD
Description:
The Kolar tubes have sold!!! Barrel only. 12ga. MX8 square mono block, type four, 28 3/8" length, serial number is shown in Pictures 82xxx range. This is not a carrier barrel! 16 choke tubes. 11 Generation 2, original, Perazzi chokes. 2-0's(cylinder),
1-#1 .004 (skeet). 2-#2's .008(I.C.), 2-#4's .016(lt. Mod.) 2-#6"s .024(I.M.) 1-#8 .032(full) 1-#10 .040(x-full). Also: 5 Wright choke tubes in the following: 2-#1's(.004) skeet, 1-#3 .012(I.C.), 2-#4's .016(lt.mod.)
This is a flat, 11x11mm paralell rib. It had a Hi-viz system that was removed and a typical bead was installed. It is an easy fix to re-install the hi-Viz and get rid of the gap you see. The bore is 18.4(.725). The forcing cones have been lengthened. Both barrels are ported. There is a white front bead and a smaller metal mid-bead. No galling. these barrels will fit any Perazzi MX8 style square mono-block accepting receiver. It will not fit on any MX3, MX5, MX6 or MX7. It will fit on MX3 special, MX8, MX8 special, MX2000, MX11 and a few more. Split barrels with no side ribs. The barrel weight is stamped 1.5kg, however it really weighs a bit less at 1.47Kg(3lb's 3.8OZ's). I would rate the bluing at 98%. Perfect for Skeet, Sporting clays and live box birds. They will snap on the receiver but may require some final fitting by a competent gunsmith. My return policy is three day non-shooting inspection. I will not accept a return unless I have mis-represented or not disclosed info. on the the barrels either through print or Picture. Returning the barrels because they may require fitting is not an acceptable reason.
SOLD
|
Click Photo to Enlarge
|
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Jim Veta
Company: Member Since: 12/6/10
State:
Nevada
Country: United States
Phone:
(310) 291-1784
Active Listings: 0
Total Listings: 222
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days Payment Methods: money order, cashiers check
Perazzi MX8 12 gauge. 28 3/8" Long. Barrels only. sixteen choke tubes. Full set of skeet sub gauge .410, 28 and 20ga.
Description: The Kolar tubes have sold!!! Barrel only. 12ga. MX8 square mono block, type four, 28 3/8" length, serial number is shown in Pictures 82xxx range. This is not a carrier barrel! 16 choke tubes. 11 Generation 2, original, Perazzi chokes. 2-0's(cylinder), 1-#1 .004 (skeet). 2-#2's .008(I.C.), 2-#4's .016(lt. Mod.) 2-#6"s .024(I.M.) 1-#8 .032(full) 1-#10 .040(x-full). Also: 5 Wright choke tubes in the following: 2-#1's(.004) skeet, 1-#3 .012(I.C.), 2-#4's .016(lt.mod.) This is a flat, 11x11mm paralell rib. It had a Hi-viz system that was removed and a typical bead was installed. It is an easy fix to re-install the hi-Viz and get rid of the gap you see. The bore is 18.4(.725). The forcing cones have been lengthened. Both barrels are ported. There is a white front bead and a smaller metal mid-bead. No galling. these barrels will fit any Perazzi MX8 style square mono-block accepting receiver. It will not fit on any MX3, MX5, MX6 or MX7. It will fit on MX3 special, MX8, MX8 special, MX2000, MX11 and a few more. Split barrels with no side ribs. The barrel weight is stamped 1.5kg, however it really weighs a bit less at 1.47Kg(3lb's 3.8OZ's). I would rate the bluing at 98%. Perfect for Skeet, Sporting clays and live box birds. They will snap on the receiver but may require some final fitting by a competent gunsmith. My return policy is three day non-shooting inspection. I will not accept a return unless I have mis-represented or not disclosed info. on the the barrels either through print or Picture. Returning the barrels because they may require fitting is not an acceptable reason. SOLD |
Click Photo to Enlarge
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Jim Veta
Company:
Company:
Member Since: 12/6/10
State:
Nevada
Country: United States
Phone:
(310) 291-1784
Active Listings: 0
Total Listings: 222
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: money order, cashiers check
Perazzi MX8 12 gauge. 28 3/8" Long. Barrels only. sixteen choke tubes. Full set of skeet sub gauge .410, 28 and 20ga.
Description:
The Kolar tubes have sold!!! Barrel only. 12ga. MX8 square mono block, type four, 28 3/8" length, serial number is shown in Pictures 82xxx range. This is not a carrier barrel! 16 choke tubes. 11 Generation 2, original, Perazzi chokes. 2-0's(cylinder),
1-#1 .004 (skeet). 2-#2's .008(I.C.), 2-#4's .016(lt. Mod.) 2-#6"s .024(I.M.) 1-#8 .032(full) 1-#10 .040(x-full). Also: 5 Wright choke tubes in the following: 2-#1's(.004) skeet, 1-#3 .012(I.C.), 2-#4's .016(lt.mod.)
This is a flat, 11x11mm paralell rib. It had a Hi-viz system that was removed and a typical bead was installed. It is an easy fix to re-install the hi-Viz and get rid of the gap you see. The bore is 18.4(.725). The forcing cones have been lengthened. Both barrels are ported. There is a white front bead and a smaller metal mid-bead. No galling. these barrels will fit any Perazzi MX8 style square mono-block accepting receiver. It will not fit on any MX3, MX5, MX6 or MX7. It will fit on MX3 special, MX8, MX8 special, MX2000, MX11 and a few more. Split barrels with no side ribs. The barrel weight is stamped 1.5kg, however it really weighs a bit less at 1.47Kg(3lb's 3.8OZ's). I would rate the bluing at 98%. Perfect for Skeet, Sporting clays and live box birds. They will snap on the receiver but may require some final fitting by a competent gunsmith. My return policy is three day non-shooting inspection. I will not accept a return unless I have mis-represented or not disclosed info. on the the barrels either through print or Picture. Returning the barrels because they may require fitting is not an acceptable reason.
SOLD
Description:
The Kolar tubes have sold!!! Barrel only. 12ga. MX8 square mono block, type four, 28 3/8" length, serial number is shown in Pictures 82xxx range. This is not a carrier barrel! 16 choke tubes. 11 Generation 2, original, Perazzi chokes. 2-0's(cylinder),
1-#1 .004 (skeet). 2-#2's .008(I.C.), 2-#4's .016(lt. Mod.) 2-#6"s .024(I.M.) 1-#8 .032(full) 1-#10 .040(x-full). Also: 5 Wright choke tubes in the following: 2-#1's(.004) skeet, 1-#3 .012(I.C.), 2-#4's .016(lt.mod.)
This is a flat, 11x11mm paralell rib. It had a Hi-viz system that was removed and a typical bead was installed. It is an easy fix to re-install the hi-Viz and get rid of the gap you see. The bore is 18.4(.725). The forcing cones have been lengthened. Both barrels are ported. There is a white front bead and a smaller metal mid-bead. No galling. these barrels will fit any Perazzi MX8 style square mono-block accepting receiver. It will not fit on any MX3, MX5, MX6 or MX7. It will fit on MX3 special, MX8, MX8 special, MX2000, MX11 and a few more. Split barrels with no side ribs. The barrel weight is stamped 1.5kg, however it really weighs a bit less at 1.47Kg(3lb's 3.8OZ's). I would rate the bluing at 98%. Perfect for Skeet, Sporting clays and live box birds. They will snap on the receiver but may require some final fitting by a competent gunsmith. My return policy is three day non-shooting inspection. I will not accept a return unless I have mis-represented or not disclosed info. on the the barrels either through print or Picture. Returning the barrels because they may require fitting is not an acceptable reason.
SOLD
Guns International #: 100642686
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Jim Veta
Company:
Company:
Member Since: 12/6/10
State:
Nevada
Country: United States
Phone:
(310) 291-1784
Active Listings: 0
Total Listings: 222
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
3 days
3 days
Payment Methods: money order, cashiers check
Perazzi MX8 12 gauge. 28 3/8" Long. Barrels only. sixteen choke tubes. Full set of skeet sub gauge .410, 28 and 20ga.
Description:
The Kolar tubes have sold!!! Barrel only. 12ga. MX8 square mono block, type four, 28 3/8" length, serial number is shown in Pictures 82xxx range. This is not a carrier barrel! 16 choke tubes. 11 Generation 2, original, Perazzi chokes. 2-0's(cylinder),
1-#1 .004 (skeet). 2-#2's .008(I.C.), 2-#4's .016(lt. Mod.) 2-#6"s .024(I.M.) 1-#8 .032(full) 1-#10 .040(x-full). Also: 5 Wright choke tubes in the following: 2-#1's(.004) skeet, 1-#3 .012(I.C.), 2-#4's .016(lt.mod.)
This is a flat, 11x11mm paralell rib. It had a Hi-viz system that was removed and a typical bead was installed. It is an easy fix to re-install the hi-Viz and get rid of the gap you see. The bore is 18.4(.725). The forcing cones have been lengthened. Both barrels are ported. There is a white front bead and a smaller metal mid-bead. No galling. these barrels will fit any Perazzi MX8 style square mono-block accepting receiver. It will not fit on any MX3, MX5, MX6 or MX7. It will fit on MX3 special, MX8, MX8 special, MX2000, MX11 and a few more. Split barrels with no side ribs. The barrel weight is stamped 1.5kg, however it really weighs a bit less at 1.47Kg(3lb's 3.8OZ's). I would rate the bluing at 98%. Perfect for Skeet, Sporting clays and live box birds. They will snap on the receiver but may require some final fitting by a competent gunsmith. My return policy is three day non-shooting inspection. I will not accept a return unless I have mis-represented or not disclosed info. on the the barrels either through print or Picture. Returning the barrels because they may require fitting is not an acceptable reason.
SOLD
Description:
The Kolar tubes have sold!!! Barrel only. 12ga. MX8 square mono block, type four, 28 3/8" length, serial number is shown in Pictures 82xxx range. This is not a carrier barrel! 16 choke tubes. 11 Generation 2, original, Perazzi chokes. 2-0's(cylinder),
1-#1 .004 (skeet). 2-#2's .008(I.C.), 2-#4's .016(lt. Mod.) 2-#6"s .024(I.M.) 1-#8 .032(full) 1-#10 .040(x-full). Also: 5 Wright choke tubes in the following: 2-#1's(.004) skeet, 1-#3 .012(I.C.), 2-#4's .016(lt.mod.)
This is a flat, 11x11mm paralell rib. It had a Hi-viz system that was removed and a typical bead was installed. It is an easy fix to re-install the hi-Viz and get rid of the gap you see. The bore is 18.4(.725). The forcing cones have been lengthened. Both barrels are ported. There is a white front bead and a smaller metal mid-bead. No galling. these barrels will fit any Perazzi MX8 style square mono-block accepting receiver. It will not fit on any MX3, MX5, MX6 or MX7. It will fit on MX3 special, MX8, MX8 special, MX2000, MX11 and a few more. Split barrels with no side ribs. The barrel weight is stamped 1.5kg, however it really weighs a bit less at 1.47Kg(3lb's 3.8OZ's). I would rate the bluing at 98%. Perfect for Skeet, Sporting clays and live box birds. They will snap on the receiver but may require some final fitting by a competent gunsmith. My return policy is three day non-shooting inspection. I will not accept a return unless I have mis-represented or not disclosed info. on the the barrels either through print or Picture. Returning the barrels because they may require fitting is not an acceptable reason.
SOLD
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classified advertising of guns, gun related items and services for sale online. If you are looking to buy guns online or sell guns online, you have come to the right place. GunsInternational.com gun classifieds currently have over 200,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww1
Privacy Policy
User Agreement
FAQs
Contact Us
Careers
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww1
Guns International.com | V4.1 ww1