The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
It’s curved etched blade is 32” long and is 37 ½” overall in length. U.S. is on the right side of the etched blade and Epluribus Unum on the left side, Ames Mfg. Co. Chicope
...Click for more info
Very good condition 35 inch blade with some dark patina tarnish no corrosion. Desirable 1864 civil war are issued saber Looks like a JM inspector mark on the pommel.
MM insp
...Click for more info
Rare M1867 Peabody bayonet
Socket bayonet for use with the Model 1867 Peabody cartridge rifle This uncommon bayonet is identified by it’s dimensions and rather long Picasso compared to
...Click for more info
This piece is in good condition with signs of wear commensurate with age/use. Note: there are hairlines in the ivory handle. /// makers mark weak/// locks up tight///&nbs
...Click for more info
Description
ca 1840 Vauthier French Folding Bowie Knife. This is an early, rare, and near mint, unsharpened extended blade, lock back folding Bowie knife with carved ivory scales by the early and not
...Click for more info
CIVIL WAR U.S. MARINE CORPS NON COMMISSIONED OFFICER’S MODEL 1840 SWORD AND SCABBARD. 32” o/a with 24” blade relief etched in a floral cartouche “U.S.M.C.” and signed in
...Click for more info
This is a very handsome saber that measures 37 1/4" overall, with a 32 1/4" curved, single-edged blade having wide single fullers, and drop-point. The blade has a mostly bright gray patina w
...Click for more info
"This is a fine Japanese tanto signed “Kanekuni" (??) of the Mino tradition, dating to the Koto period (late Muromachi, 16th century). The blade measures 12.125 inches (30.8 cm) and is mount
...Click for more info
"Blade: A slender ko-tanto with a nagasa of 9.125", straight form (hira-zukuri sugata) with no shinogi ridge. The blade is ubu (unaltered) with two mekugi-ana, and a silver-plated habaki acc
...Click for more info
"This is a traditionally made Japanese gendaito dating to the Showa period (WWII era). The blade measures 24.125 inches (nagasa) with a classic shinogi-zukuri form, visible yokote, and an active
...Click for more info
"Blade: A massive omi-yari with a nagasa of 28" — unusually long for the type. The blade is of su-yari form, double-edged with a long central ridge and a deep bo-hi extending down the shaft.
...Click for more info
"Period: Edo period, Kyoho era (1716–1736) Mounts: Shirasaya with inked sayagaki attribution This is a fine Japanese katana mounted in a plain wooden shirasaya, bearing an inked sayagaki on the
...Click for more info
"This is a fine Japanese wakizashi forged in the Shinto to Shin-Shinto period (17th–19th century) in a naginata-naoshi style blade. The blade measures 15.25 inches (nagasa) and is mounted in a pl
...Click for more info
"A Koto-period Japanese ko-tanto dating to the late Muromachi era (15th–16th century), in elaborate Edo-period mounts. • Blade: The blade measures 7 15/16 inches (nagasa) in length. Forged in hir
...Click for more info
10-1/2 inch Damascus blade. Bone Horse head handle. Sheath is covered with a black velveteen and has some gold cordage trim. Quite an interesting piece.
Leroy Merz Antique Firearms specializ
...Click for more info
"This Japanese wakizashi has a blade length of 18 7/16 inches (nagasa) and is mounted in full Edo-period koshirae. The tang bears a long dedicatory inscription on one side and a date reading Anse
...Click for more info
"Period: Koto era, late Muromachi period (c. 1500s) Signature (mei): Mumei (unsigned) Blade (nagasa): 27 3/8 in. Mounts: In plain shira saya with a copper habaki Description: A classic unsigned
...Click for more info
"This is a late Edo period (Shin-shinto) katana with a blade length of 26.875 inches (68.3 cm), mounted in shira saya. The tang is ubu with one mekugi-ana, and is signed: ???? ??????? ??? “Respec
...Click for more info
"Period: Showa era, c. 1930s–1940s Signature (mei): ??? — Kaneshige saku (“made by Kaneshige") on the nakago (one mekugi-ana, sujikai yasurime). Blade (nagasa): 25.75 in. (short katana / lon
...Click for more info
"fine Edo-period wakizashi signed “Settsu ju Sukehira" (?????) and dated Kanbun 7 (1667). The blade measures 21 9/16 inches (54.7 cm) and is preserved in plain shira-saya mounts. This wakiz
...Click for more info
"This Japanese wakizashi has a blade length of 21.125 inches (nagasa) and is preserved in plain shira saya storage mounts. The tang bears the signature ???? (Sasamori Masanobu), identifying the s
...Click for more info
14-1/2 inch blade is half Damascus and the lower half is made of 3 metal rods brought together at the point. The center rod has a twist and it makes this dagger stand out. The elephant head is ornatel
...Click for more info
"A very small ko-tanto with a blade length of 5 3/8 inches, in plain shira saya storage mounts. The blade is hira-zukuri in form with a small, neat kissaki and a single mekugi-ana. It is unsigned
...Click for more info
"A signed Shinto era wakizashi, bearing the mei “Daido" (??), measuring 19 5/8 inches in blade length. The Daido line of smiths worked during the Edo period, with branches active in Mino and
...Click for more info
"Nagasa 44.2 cm (17.4"). Signed by attribution on the shirasaya: ?????? (Yamashiro no Kuni Shigeyoshi saku), with note of production in the Kan’ei period. Forged in the Yamashiro tradition w
...Click for more info
"Approximately 33.75" blade. The nakago is signed Hizen Kuni Tadayoshi. This blade has a suguha Hamon and ji hada that is konuka hada. We belive this to be Edo / Shinshinto revival piece. Th
...Click for more info
"24 ¼"" blade. This is a long wakazashi or short katana. The blade is in near perfect polish with a gunome midare hamon. This blade has a lot of characteristic of an older blade,
...Click for more info
"This is a traditionally-made Japanese katana, mounted in Imperial Army officer koshirae. The blade measures approximately 26.25" and features a wide body with long o-kissaki and graceful cu
...Click for more info
"24 7/8" blade. This is an older blade that has been remounted into Russo Japanese War mounts. It has a Kin zogan Mei which is the gold inlaid signature signed Suke Sada. Based on this and t
...Click for more info
"This is a large and impressive Japanese katana signed “Noshu Kawai Hisasada, made at the age of 78" with a date inscription of Bunkyu 3rd year, 11th month (November 1863). The smith proudly
...Click for more info
"25 5/8" blade in full polish. The nakago is signed Kane Nori. The Hamon is midare. This sword is in full polish in its shira saya.
...Click for more info
"A rare and imposing Japanese honoto (shrine dedication sword), measuring 39.5 inches in cutting length with a width of 1.625 inches. Unlike combat swords, this oversized odachi-style blade was p
...Click for more info
"Signed ?????? (Watanabe Norichiyo saku) Nagasa: 36.4 cm (14 5/16") Nakago: one mekugi-ana, patinated, signed Sugata: straight to shallow-curved ko-wakizashi with standard kissaki Era:
...Click for more info
32754-EXCELLENT CIVIL WAR AMES MFG. CO., CHICOPEE, MASS. U.S. MODEL 1860 CAVALRY SABER AND SCABBARD. All original and in very superior condition overall. Has the original leather grip wrap and wire in
...Click for more info
32821-BATTLE OF YORKTOWN REVOLUTIONARY WAR FRENCH MODEL 1769 SOCKET BAYONET. Old tag attached says was found at Yorktown. Has old dent in socket from battle damage. Missing locking ring probably blown
...Click for more info
32817- REVOLUTIONARY WAR ERA DUTCH SOCKET BAYONET FROM THE GEORGE NEUMANN COLLECTION CIRCA 1760’S. 16” o/a with 12” blade. Socket engraved “N/NO. 680”. Neumann’s pr
...Click for more info
This is a handsome sword that measures 30 1/8" overall, with a 25 3/4" straight, single-edged bade having etched decorative panels. This is a parade version of the short sword issued to arti
...Click for more info
Samurai Ko-Katana Edo Period 15 1/2" blade,21" overall,very nice
GUN COLLECTIONS WANTED FOR CASH! We buy, sell, consign and trade new and used firearms.We travel for large collections,f
...Click for more info
32 inch blade shows some brown color but basically free of pits. Nice markings. Brass handles. Nicely wrapped with braided brass strands. The scabbard comes in two pieces still looks pretty good.
L
...Click for more info
29 inch curved blade is nicely done with acid etching of the Swiss Cross. Tip of the blade shows some rust. Brass handle. Leather wrapped. The brass fitted scabbard may not belong to the sword and sho
...Click for more info
This is a US M1873 Trapdoor Socket Bayonet. The 18" blade retains none of the original bluing with "US over J" on the ricasso, the blade is good, only light marks from age with light ox
...Click for more info
This is a Civil War Era Spear Point Bowie and it has 14 1/8” blade, it is 2 3/16” wide and the spine is 15/31” wide. The blade is not marked and the handle is brass wire wrapped wa
...Click for more info
This is a Swiss Model 1878 Pioneer Style Sawtooth short sword with leather scabbard marked "GEBR. WEYERSBERG SOLINGEN" on the Ricasso above a Swiss Cross with "1" over "78
...Click for more info
This is a Swedish manufactured M1867 Cruciform Socket Bayonet, no scabbard. The 19 1/4" cruciform blade is in very good condition with nice tip and mild wear with CEB stamped on the top of the bl
...Click for more info
A U.S. Civil War Military Issued Ames Model 1840 Artillery sword Dated 1864 In Very Good Untouched Condition. All original and complete. The sword has a very good blade with nice markings. It is marke
...Click for more info
A U.S. Civil War Military Issued Model 1860 Cavalry Sword Made by Mansfield & Lamb" Dated 1864 In Fine Untouched Condition. All original and complete. The sword has a fine unto
...Click for more info
"An excellent example of a Japanese Imperial Navy Officer’s Model 1883 parade/dress saber, produced by Nakano Shoten. The chrome-plated blade remains approximately 95% intact, with minor chipping
...Click for more info
"Made in 1856. Beautiful Ames Presentation sword to Captain L. Lamber of the Troy City Rifle Company. Blade is 31 inches and the sword is 38" overall length. Grip is beautiful engraved with
...Click for more info
"32" Blade that has been cleaned and has a bright polish. Markings are clear. Grip is bare wood and is very dark in color. Scabbard is very good with a dark patina and some pitting. Austin l
...Click for more info
"A very fine and extremely handsome presentation grade foot officer’s sword with ornate scabbard by Schnitzler & Kirschbaum of Solingen. The hilt is a fairly standard 1850 hilt, although ther
...Click for more info