The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Here is a nice 12 gauge VH grade Parker, built in 1922. The barels are 30" with 2 5/8" chambers and excellent bores, choked .031/.035 (about ful in both, or improved modified/full.
...Click for more info
Here is a fine Model 99 take down in .300 Savage with an extra .410 barrel, built in 1941. The rifle barrel is 24" with an excellent bore. The shotgun barrel is 24" with a 2 1/2
...Click for more info
Here is an exceptional sporter in .416 Rigby, built on a CZ 550 action by the talented Idaho maker Robert "Bob" Mason. The 22" barrel was made by Bill Atkinson of Atkinson & M
...Click for more info
Here is a Savage Model 23D rifle in .22 Hornet in very good condition. The barrel is 24" with an excellent bore. There is a vintage side mounted Weaver scope. The length of pull
...Click for more info
Here is a very handsome 12 gauge boxlock ejector by Alexander Henry, built circa 1890. The 28" barrels are invisibly sleeved with 2 1/2" chambers. There are areas of pit
...Click for more info
Here is a nice ultra lightweight 12 gauge boxlock non ejector by W. Horton of Glasgow, Scotland. It was built circa 1900. The nitro proved barrels are 28” with 2 ½” cham
...Click for more info
Here is a fabulous, completely overhauled 12 gauge Lefever IE Grade. The 28" barrels were sleeved by Kirk Merrington, and measure 28". The side plated action features bold case c
...Click for more info
Here is a very high quality (and very shootable) pull back top lever bar in wood hammergun from Thomas Horsley of York, one of the best regional British gunmakers of the mid to late 1800s
...Click for more info
SOLD
Here is a handsome 16 gauge boxlock ejector by Webley & Scott, built in 1929. The barrels are 28" with nitro re proved barrels with 2 3/4" chambers
...Click for more info
SOLD
Here is a fine Brno Model 21 sporter in 7x57, built in 1951. The barrel is 23.6" (60cm) with an excellent bore. There is a ramped front sight, and the rear sights have
...Click for more info
Here are some high quality 12 gauge English shotshells by Eley. The shot size is 7.5 (about 8.5 US). The shell length is 67mm, and the box states: SUITABLE FOR 2 1/2" CHAMBERS
...Click for more info
SOLD
A very good NRA Springfield sporter by Griffin & Howe. This rifle was built either late December of 1927 or early January, 1928. The star gauged barrel is 24" with an excellent
...Click for more info
Here is a fabulous, virtually unused Oberndorf custom 98 Mauser sporter. The metalwork was done by Jasper Raybourne, and the rifle was impeccably stocked by David Pearce, who also blued the 24&r
...Click for more info
Here is a top quality Brno Custom barreled action in .30 06. The medium weight barrel is 24". The action is surface ground and heat treated. There is a custom bolt handle, two positio
...Click for more info
Here is a very fine 7x57 barreled action. The 1909 Argentine action has been surface ground and heat treated. There is a custom bolt handle, two position safety and Timney trigger assembly
...Click for more info
A excellent .25 06 Brno Mauser barreled action, surface ground with custom bolt handle, 2 position safety, 24" medium weight barrel and FN bottom metal. The entire assembly has been hand polished
...Click for more info
Here is a beautiful Winchester High Wall built in 1895. It has a 26" barrel by C. P. Donnelly, and is chambered in .219 Zipper. The barrel has target blocks installed. The set t
...Click for more info